Voice editing with one pair of speakers
If you already use an audio interface and want to control the level, switch to mono or mute the sound directly from your shared desk, a compact controller with a single stereo signal path may be all you need.
For a single pair of speakers, a controller with an easy-to-reach level control and the buttons you actually need, such as Mono, Dim or Mute, should be enough. If you regularly switch between speakers and headphones, look for a dedicated headphone path. Multiple headphone outputs and talkback are mainly useful when other people need to listen in or take part in a recording.
If you already use an audio interface and want to control the level, switch to mono or mute the sound directly from your shared desk, a compact controller with a single stereo signal path may be all you need.
If you switch between speakers and headphones while editing, check that the controller has a dedicated headphone path with the controls you need.
If you also work with a speaker or need several headphone stations, separate headphone paths and talkback are important features to consider.
A good fit if: you have an audio interface and a pair of speakers, and mainly want direct control of the level, Mono, Dim or Mute.
Worth noting: A headphone output isn’t included as standard; the Mackie Big Knob Passive doesn’t list one.
A good fit if: you switch between speakers and headphones while editing, or want to monitor a source separately.
Worth noting: The Palmer MONICON L G2 uses its built-in power supply for functions including the headphone amplifier. Here, a passive signal path doesn’t mean every feature works without power.
A good fit if: several people need separate headphone paths, or you need to communicate with someone during a recording.
Worth noting: For editing at a single listening position, extra headphone paths and talkback may go unused.
| What you need | What to check before buying | Who it matters most to |
|---|---|---|
| Level control and voice monitoring | Check whether the specific model has the buttons you need for Mono, Dim and Mute. Palmer lists these functions for the MONICON M G2; Mackie lists them for the Big Knob Passive. | If you want to make quick listening checks directly from your desk while editing voice recordings, easy access to the controls is a priority. Around 36 % of consumers have this as their main requirement. |
| Switching between speakers and headphones | Look for a clearly specified headphone output with its own level control. Drawmer lists both for the CMC2; Mackie doesn’t list a headphone output for the Big Knob Passive. | If you switch between speakers and headphones while editing, or want to monitor a source separately, you’ll need a suitable headphone path. Around 29 % of consumers say this is their top priority. |
| Connections and switching sources | Make sure the controller’s sockets match your interface and speakers, and count the sources and pairs of monitors you actually need. Palmer lists a stereo signal path for the MONICON M G2; Drawmer lists two balanced stereo inputs and two monitor pairs for the CMC2. | If you want to connect existing equipment or switch between sources and monitors, the connections and signal paths need to suit your setup. Around 21 % of consumers have connecting and switching as their main requirement. |
| Separate monitoring and talkback | Check the number of headphone outputs and whether their levels can be adjusted separately, as well as whether talkback is available. PreSonus lists four individually controlled headphone outputs and talkback for the Monitor Station V2; Audient lists four headphone outputs and talkback for Nero. | If other people need to listen in, or you need to speak to someone during a recording, separate paths and talkback are useful. Around 14 % of consumers have this as their main requirement. |
A passive speaker controller doesn’t automatically include a headphone output. Mackie doesn’t list one for the Big Knob Passive.
Before buying, check whether you can use the controller for headphones or whether another device in your setup already covers this need.
If the controller doesn’t have a headphone path and you need one, you may need a separate headphone amplifier.
An extra input or output is only useful if it suits your sources, speakers and headphones.
Before choosing a model, note down the sockets you have and the signal paths you need, then check them against the full product specifications.
According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only. The USB power adapter isn’t included.
Plan your power supply and audio cabling separately, and check which analogue connections you need for your audio signal.
You may need an additional USB power adapter.
Talkback and multiple separate headphone paths are designed for communication and shared listening. They may go unused when you’re editing at a single listening position.
Choose these features only if other people will actually be listening in or taking part in a recording at your workstation.
The MONICON range includes models for compact stereo editing setups, as well as versions with extra sources and a headphone path.
The Big Knob Passive is designed for controlling and switching between sources and pairs of monitors.
The CMC2 is designed for compact setups with multiple sources, two pairs of monitors and a dedicated headphone path.
The Monitor Station V2 is designed for several headphone stations and talkback, while the MicroStation BT is a more compact product line.
Nero is designed for setups with multiple speaker and headphone paths, as well as talkback.
Yes, if your existing interface provides the audio signal and you only need suitable speaker paths and the controls you require. If you want the controller itself to drive headphones, check that a headphone output is explicitly listed; Mackie doesn’t list one for the Big Knob Passive.
For the speaker path described here, it sits between the analogue output of your audio interface and the corresponding speaker inputs. Check the specific sockets: Palmer lists XLR/TRS combo sockets and a 3.5 mm input, along with XLR and 3.5 mm outputs, for the MONICON M G2.
No. PreSonus describes the USB-C connection as being for power only. You’ll need a suitable analogue signal path for computer audio; according to PreSonus, the USB power adapter isn’t included.
Follow the instructions for your specific device. Mackie recommends using a dry cloth for the Big Knob Passive and warns against opening the casing to carry out repairs yourself.