Which setup is right for you?

Mixing solo with one pair of monitors

If you mix backing vocals at your desk, a conveniently placed level control and a way to check your mix in mono are important. You only need additional monitoring paths if your setup actually uses them.

Mixing with reference monitors

If you switch between different sources or pairs of speakers to assess vocals, look for the switching options and connections you need.

Recording with other people

For group vocal sessions, individually adjustable headphone paths, different cue mixes and talkback can be important. Also check which signals your audio interface can actually provide.

What should you look for when buying?

First, check which tasks your audio interface or software already handles. Then you can compare the controller’s connections and monitoring paths with the signal flow in your setup.

What you need What to check before buying Who is it important to?
Checking your vocal mix in mono Check whether your software already has a suitable mono monitoring function, and whether the controller’s mono switch affects the monitoring path you want to check. If I want to hear whether my backing vocals still work in mono while mixing, I need an easy way to check. Around 33 % of consumers put mono monitoring first.
Connections and level control Check the sockets and number of stereo inputs and outputs on the exact model against your audio interface and speakers. If I mainly use one pair of speakers at my desk, I want to adjust the level easily without paying for paths I don’t use. Around 27 % of consumers prioritise a simple monitoring path with compatible connections.
Switching between sources or speakers Count sources and pairs of monitors separately; a specification such as “2×2” doesn’t automatically mean there are headphone outputs. If I want to compare my vocal mix with a second source or another pair of speakers, I need the right switching options for that. Around 20 % of consumers prioritise switching between references.
Headphone cues and talkback Work out how many people need to use headphones at the same time, which cue signals you need and which outputs are available on your audio interface. If several people need their own headphone paths or talkback during a vocal session, a volume control and a speaker path may not be enough. Around 20 % of consumers prioritise separate headphone cues.

Common misconceptions

  • “2×2” means two headphone outputs

    For the Mackie Big Knob Passive, the specification refers to two sources and two pairs of monitors. It doesn’t tell you how many headphone outputs there are.

    Count sources, speaker outputs and headphone paths separately, and check the features of the exact model variant.

  • The connectors will fit

    A controller may use different connections from your audio interface or speakers. According to the manufacturer, the combo and 3.5 mm inputs on the Behringer MONITOR1 can’t be used at the same time; the Palmer MONICON S G2 has stereo RCA inputs and outputs.

    Before buying, map out the signal path from your audio interface to each speaker and pair of headphones, then check the connections on the specific model.

  • Four headphone outputs automatically give you four separate cue mixes

    The PreSonus Monitor Station V2 offers a Main/Cue selection for each headphone output. Whether different signals are available also depends on the sources connected to it.

    As well as checking the number of sockets, find out which cue signals your audio interface and software can actually output.

Key brands at a glance

Behringer

The MONITOR1 is designed for a single passive speaker path, while the STUDIO M is a separate model with source and monitor switching.

  • According to the manufacturer, the MONITOR1 has mono, mute, XLR/TRS combo inputs and XLR outputs.
  • The MONITOR1’s combo and 3.5 mm inputs can’t be used at the same time. The STUDIO M’s features don’t automatically apply to this model.

Mackie

The Big Knob Passive is designed for two sources and two pairs of monitors. The Big Knob Studio models should be considered separately.

  • Mackie lists mono, mute and dim functions for the Big Knob Passive.
  • The manufacturer’s descriptions of sound quality aren’t an independent comparison. If you need a separate headphone path, check the features of the specific model.

Palmer

The MONICON S G2 and MONICON L G2 are designed for different setups: a compact RCA stereo path, or multiple sources and monitoring paths.

  • According to Palmer, the MONICON S G2 doesn’t need a power supply and has one stereo RCA input, one stereo RCA output and a mono switch.
  • The MONICON L G2 needs a power supply for features including its headphone amplifier and Bluetooth. These features aren’t available on the S G2.

PreSonus

The Monitor Station V2 is designed for setups with multiple pairs of monitors and several headphone outputs.

  • PreSonus lists four individually adjustable Main/Cue headphone outputs and a built-in talkback microphone.
  • The separate mixes available also depend on the signals connected to the unit.

Audient

The Nero is designed for more extensive speaker and headphone routing when working with others.

  • Audient lists four flexibly routable headphone outputs, multiple speaker outputs, and internal and external talkback.
  • These features describe the available routing options, but don’t demonstrate better mix quality than simpler devices.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a hardware mono switch to check my backing vocals?

No. A suitable mono monitoring function in the software you already use can do the job. Steinberg describes “Mix to Mono” as a way to check mono compatibility. Whether a hardware switch makes your workflow easier depends on how you prefer to work.

How do I connect a simple passive monitor controller?

Place it in a compatible signal path between your audio interface and active speakers. First, check the connections on the specific model: the Palmer MONICON S G2 uses RCA connections for both input and output, while the Behringer MONITOR1 has XLR/TRS combo inputs and XLR outputs. According to the manufacturer, the MONITOR1’s combo and 3.5 mm inputs can’t be used at the same time.

Does the Mackie Big Knob Passive’s 2×2 switching give you two headphone outputs?

No. Mackie’s specification refers to two sources and two pairs of monitors. Check headphone connections and features separately for the exact model variant.

Do four headphone outputs automatically mean four separate vocal cue mixes?

No. The outputs alone don’t guarantee four different signals. The PreSonus Monitor Station V2 offers an individual Main/Cue selection for each headphone output; the signals available depend on what’s connected to it.

Which audio interface outputs do I need for a separate cue path in Ableton Live 12?

Ableton says that cueing in Live 12 requires at least four dedicated audio interface outputs or two dedicated stereo outputs. Check that your audio interface provides these outputs before choosing a controller for separate headphone paths.