If you use one pair of speakers and your audio interface already takes care of your headphone output, a conveniently placed level control with mono, mute and, if needed, dim will be enough for many setups to begin with. Extra speaker, subwoofer or headphone paths are useful if you actually need them in your workflow. However, a monitor controller won’t correct bass colouration caused by your room or speaker placement.
Which setup is right for you?
Bass editor with one pair of monitors
If you want to control the level and check mono right at your desk, and already plug your headphones into your audio interface, consider whether an extra controller would genuinely make your workflow easier. Palmer and Mackie list mono functions for their respective models.
Editor with two monitoring setups
If you switch between two pairs of speakers or two sources, extra signal paths can save you from having to unplug and reconnect your equipment. Mackie and ESI describe switching options for two sources and two monitor pairs on their respective models.
Editor with a subwoofer or a dedicated headphone path
If you want to switch a subwoofer separately or control your headphones directly from the controller, check each of these features individually. PreSonus describes a sub bypass and a headphone/aux output on the MicroStation BT; Drawmer lists a dedicated headphone level control on the CMC2.
What should you look for when buying?
First, check which functions your audio interface already provides. Then choose extra signal paths to suit the equipment you actually have connected.
| What you need |
What to check before buying |
Who is it important to? |
| Level control and mono check |
Check for mono, mute and dim functions, how easy the control is to reach, and which functions your interface already provides. |
If I want to switch quickly between stereo and mono while editing bass, and control the level right at my desk, a simple, easily accessible signal path is essential. Around 39% of consumers put direct level control and mono checking first. |
| Switching between sources or monitor pairs |
Check the number of stereo inputs and outputs, and make sure each signal path has the right type of connector. |
If I regularly compare two sources or pairs of speakers, I want to switch between them without unplugging anything. Around 23% of consumers prioritise switching between monitoring setups or sources. |
| Comparing playback with and without a subwoofer |
Look for a clearly specified subwoofer output and check whether it has a bypass or switching function. |
If I use a subwoofer or am planning to add one, I want to be able to compare its contribution separately. Around 23% of consumers put subwoofer comparison first. |
| Headphone output on the controller |
Check whether the specific model has a headphone output, a dedicated level control and a power supply. |
If the headphone controls on my audio interface aren’t enough, I want to adjust the headphone level directly on the controller. Around 15% of consumers prioritise a dedicated headphone path on the controller. |
Common buying pitfalls
-
Thinking a subwoofer output will fix uneven bass
A switchable subwoofer path won’t change the room resonances that can affect the bass you hear.
Use the bypass to compare the sound, and assess your room, monitors and listening position separately from the controller.
-
Assuming a passive controller includes a headphone amplifier
ESI says the MoCo has no built-in headphone amplifier, so it can’t power headphones on its own.
Check whether the exact model has a headphone output with the level control you need. If not, you’ll still need a suitable headphone output on your interface or another device.
-
Assuming USB-C power means USB audio
According to PreSonus, the USB-C port on the MicroStation BT is for power only and doesn’t carry computer audio.
Plan your audio connections and power supply separately. PreSonus says a USB power adapter isn’t included.
-
Assuming every model in a range has the same features
Mackie says the Big Knob Passive has different features from the Studio versions; no headphone output is listed for the Passive version.
Before buying, check the full model name and the feature list for the specific device.
Key brands at a glance
Palmer
According to Palmer, the MONICON M G2 is designed for a compact stereo monitoring path.
- Palmer lists mono, dim and mute, along with XLR/TRS and 3.5 mm connection options.
- A single stereo output path is listed for this model; additional monitor paths or a dedicated headphone path aren’t specified.
Mackie
According to Mackie, the Big Knob Passive is designed for switching between two sources and two pairs of monitors.
- Mackie lists mono, mute and dim for the Passive version.
- Mackie’s model comparison doesn’t list a headphone output for the Passive version. The features of other models in the range shouldn’t be assumed to be the same.
ESI
According to ESI, the MoCo is a passive controller for two stereo sources and two stereo outputs.
- ESI lists mono, mute and L/R swap.
- The MoCo has no built-in headphone amplifier and doesn’t balance an unbalanced input signal.
PreSonus
According to PreSonus, the MicroStation BT has a separately switchable subwoofer path, while the Monitor Station V2 has multiple headphone outputs.
- PreSonus lists Sub Bypass and a headphone/aux output for the MicroStation BT. The Monitor Station V2 is specified as having four separately adjustable headphone outputs.
- According to PreSonus, the USB-C port on the MicroStation BT is for power only and doesn’t carry computer audio.
Drawmer
According to Drawmer, the CMC2 combines multiple monitor paths with a dedicated headphone path.
- Drawmer lists two stereo monitor paths, a switchable subwoofer path, mono, dim, mute and a headphone level control.
- The manufacturer’s claims about particularly transparent sound aren’t an independent comparison with other devices.
Joybuy products
Related products coming soon.
Frequently asked questions
Where do I connect a passive monitor controller?
Connect the analogue output of your audio interface to a suitable input on the controller, then connect its output to the inputs on your active monitors. Check the connector type and whether each device uses balanced or unbalanced connections. ESI notes that the MoCo doesn’t balance an unbalanced input signal.
Does a subwoofer bypass mean I don’t need to assess my room?
No. On the PreSonus MicroStation BT, Sub Bypass mutes the subwoofer so you can compare the sound. Genelec notes that room resonances and monitor placement can still affect the bass you hear at your listening position.
Can I use the MicroStation BT as an audio interface over USB-C?
No. PreSonus specifies that USB-C on the MicroStation BT is for power only; use the listed audio inputs for audio signals. PreSonus says a USB power adapter isn’t included.
What are my rights if a newly purchased controller is faulty in Germany?
If you buy as a consumer and a new product is faulty, you can make a claim against the seller under your statutory rights for up to two years after delivery. The Verbraucherzentrale distinguishes these rights from a voluntary guarantee; under statutory rights, repair or replacement is generally available.
Is the CE mark an independent test of sound quality or safety?
No. According to Your Europe, by affixing the CE mark, the manufacturer declares that the product meets the relevant EU requirements. It isn’t an independent quality mark for audio. For affected electrical and radio equipment, the Bundesnetzagentur lists checks including marking, traceability, manufacturer details and any required information in German. The rules that apply to a specific model depend on the product.