Who is a monitor controller for?

Piano mixers with one pair of speakers

If you want to adjust your monitoring level at your desk and check your mix in mono when needed, start by comparing the features already available on your interface. Palmer lists mono, dim and mute for one stereo output path on the MONICON M G2. Bonedo notes that audio interfaces also handle monitoring in some home recording setups.

Quietly working headphone mixers

If you mix on headphones while other people are nearby, you need a headphone path that’s actually available on your interface or controller. ESI points out that the passive MoCo doesn’t have a built-in headphone amplifier, while Palmer lists a separately adjustable headphone output on the MONICON L G2.

Mixer users with multiple monitoring paths

If you switch between sources or pairs of speakers, or connect a subwoofer, count the paths you need and check them against the model’s connections. Mackie describes the Big Knob Passive as switching between two sources and two monitor pairs. PreSonus lists a subwoofer bypass for one pair of speakers on the MicroStation BT.

What should you look for when buying?

First, check what your interface already lets you control easily. Then decide whether direct volume and mono controls are enough, or whether your setup needs additional headphone, speaker or subwoofer paths.

What you need What to check before buying Who is this important for?
Direct volume control Check the control on your interface, as well as the mute and dim functions on the specific model. The German Federal Environment Agency warns that prolonged exposure to high volumes can damage your hearing. If you want to adjust the level directly at your desk while mixing, ease of use matters more than extra switching options. Around 36% of consumers put volume control first in this scenario.
Mono check Check whether the model has a mono function and whether your interface or DAW already lets you monitor in mono. Switching the monitoring signal doesn’t change the recorded audio file. If you want to quickly check your stereo piano mix in mono while working, an easy-to-reach switch matters. Around 29% of consumers prioritise a mono check.
Headphone path Check for a headphone output, separate level control and, where applicable, a power supply. A passive speaker controller doesn’t automatically include a headphone amplifier. If you sometimes mix on headphones while working from home, this path must actually be available on your interface or controller. Around 21% of consumers put the headphone path first.
Multiple monitoring paths Count stereo sources, speaker pairs and subwoofers separately. Also check whether you need to switch the subwoofer independently. If you want to switch between existing sources or speakers, or turn a subwoofer on and off, you’ll need routing features designed for exactly that. Around 14% of consumers prioritise multiple monitoring paths.

Common misconceptions

  • “Passive” doesn’t automatically mean it has a headphone socket

    A passive speaker controller may need a separate headphone amplifier or a suitable output on your interface to work with headphones. ESI explicitly states that the MoCo doesn’t support headphones; Mackie’s model comparison lists no headphone output for the Big Knob Passive.

    Before you buy, check the headphone path on your interface and the connections on the exact controller model.

    Depending on your setup, you may need an additional headphone amplifier or a different model.

  • More sockets don’t automatically mean more switchable paths

    Different types of socket can belong to a single signal path. Palmer describes the MONICON M G2 as having one stereo input path and one stereo output path, despite its range of connections.

    Count the signal paths you need and check whether the model supports separate speaker pairs or a subwoofer that can be switched independently.

    An unsuitable controller may mean extra cabling or the need to replace it.

  • A passive volume control doesn’t replace your recording interface

    Volume control for monitoring doesn’t automatically take care of recording or other functions of your interface.

    First compare the recording and monitoring features you already have with the controls you’re actually missing.

Relevant brands and models

Palmer

The MONICON range includes models for one stereo monitoring path, as well as versions with additional outputs and a headphone path.

  • Palmer says the MONICON M G2 offers mono, dim and mute for one stereo output path.
  • According to the manufacturer, the MONICON L G2 has a separately adjustable headphone output.
  • On the L G2, the headphone amplifier and Bluetooth require the built-in power supply; these features aren’t automatically available on the M G2.

Mackie

The Big Knob Passive is designed to switch between two stereo sources and two monitor pairs.

  • Mackie lists mono, mute and dim for this model.
  • Mackie’s model comparison lists neither USB audio nor headphone outputs for the Passive version; the Studio versions are different products.

ESI

ESI describes the MoCo as a passive controller with two stereo input paths and two stereo output paths.

  • The manufacturer lists mono and channel swap as features.
  • ESI explicitly states that the MoCo has no built-in headphone amplifier and that its outputs are intended for studio monitors.

PreSonus

According to the manufacturer, the MicroStation BT is designed for one pair of active speakers, with an optional subwoofer and additional playback options.

  • The German manufacturer’s website lists sub bypass, Bluetooth input and a 3.5 mm headphone/aux output.
  • The MicroStation BT shouldn’t be confused with a model documented as switching between two pairs of speakers.

SPL

According to the manufacturer, Control One is an option for two pairs of speakers, with monitoring through speakers and headphones.

  • SPL lists stereo, mono and channel swap modes, as well as an optional subwoofer for speaker pair A.
  • This doesn’t independently verify the manufacturer’s claims about sound quality.

Joybuy products

Similar products coming soon.

Frequently asked questions

Can a passive monitor controller replace my audio interface for recording piano?

No. Volume control and speaker switching alone aren’t enough: Mackie describes the Big Knob Passive as a passive monitor controller, not a USB recording interface. Check which recording and headphone functions your existing interface provides.

How do I connect a basic monitor controller?

Connect your interface’s line outputs to the controller’s inputs, then connect its outputs to your speakers’ inputs. For the MONICON M G2, Palmer lists XLR/TRS combo sockets and 3.5 mm connections as inputs, with XLR and 3.5 mm outputs. The right cables depend on your equipment.

How do I care for a Mackie Big Knob Passive?

Mackie recommends cleaning the Big Knob Passive with a dry cloth and warns against using it near water. For other models, follow the relevant manufacturer’s instructions.

What rights do I have if a product is faulty or I buy online in Germany?

Statutory rights against the seller generally apply under German law and are separate from a voluntary guarantee, as explained by the Verbraucherzentrale (German Consumer Advice Centre). Consumers generally have a right to cancel distance contracts; Sections 312g and 355 of the German Civil Code (BGB) set out the conditions and time limit. Exceptions and the exact start of the cancellation period depend on the contract and the rules that apply.

Does every monitor controller need CE marking?

No, not across the board. Under European Union guidance, CE marking is required only for products covered by harmonised EU rules that require it; otherwise, it must not be used. Check which product rules apply to the specific model rather than assuming the requirement based on the product name alone.