You don’t necessarily need a dedicated monitor controller if your audio interface already gives you the level control, headphone output and monitoring features you need. Manufacturer specifications from Palmer, Mackie, ESI and Drawmer show how the available features vary. A single stereo path may be enough for direct mono, dim and mute controls, while switching between sources or speakers, or having a dedicated headphone path, calls for the right extra connections and switches. Check the entire signal chain from your interface, through the controller, to your speakers and headphones rather than choosing on features alone.
Who is a monitor controller for?
Solo editor with one pair of speakers
If you edit spoken intros at your own desk, having level, mono and mute controls within easy reach can be handy. Palmer lists these features for the MONICON M G2, while Mackie includes mono, mute and dim functions on the Big Knob Passive.
Editor who switches to headphones
If you switch between speakers and headphones while editing, check whether your audio interface’s headphone output is sufficient or whether a dedicated output on the controller would be useful. Drawmer lists a headphone amplifier for the CMC2, while PreSonus specifies a headphone/aux output for the MicroStation-BT.
Editor with multiple monitoring options
If you actually compare different sources or pairs of speakers, the switching options need to suit your setup. Mackie says the Big Knob Passive lets you choose between two sources and two pairs of monitors; ESI lists two stereo inputs and two stereo outputs for the MoCo.
What should you look for when buying?
When monitoring spoken intros, the right features depend on the signal paths you actually use and the controls you’re missing at your editing desk.
| Priority |
What to check before buying |
Who it matters most to |
| Level and mono |
Compare the direct access to controls and the availability of mono, dim and mute functions with what your interface offers. |
If I often turn down spoken passages or check them in mono, I want the controls I need within easy reach, without having to unplug anything. For around 36% of consumers, easy access to level and mono controls is the main priority. |
| Headphone path |
Check the headphone output, level control and how the speaker outputs behave on the specific model. |
If I switch between speakers and headphones while editing speech, I need a suitable headphone path with easy-to-reach level control. Around 29% of consumers prioritise this signal path. |
| Sources and speakers |
Check the stereo inputs and switchable stereo outputs separately against your existing setup. |
If I really compare several sources or pairs of speakers, I need to be able to switch each path separately. For around 21% of consumers, switching between sources or monitoring options is the main priority. |
| Connections and space |
Check the connections and signal routing; allow space for plugs and cables as well as the unit itself. |
If my desk is short on space, the connections and unit need to fit my existing setup. For around 14% of consumers, connections and space are the main considerations. |
Common buying pitfalls
-
Assuming “2×2” means two headphone sockets
On the Mackie Big Knob Passive, 2×2 means a choice of two sources and two pairs of monitors. Mackie’s product comparison does not list a headphone output for this Passive version.
Check the headphone path separately and, if necessary, use the output on your audio interface.
-
Assuming USB-C means USB audio
According to PreSonus Support, the MicroStation-BT’s USB-C connection is for power only and does not carry audio to a computer.
Before buying, work out how the audio signal will get from your computer to the controller.
-
Assuming a balanced socket converts the signal
ESI points out that the MoCo does not convert an unbalanced input signal into a balanced one.
Make sure the signal type and connections match all the way from the source device, through the controller, to your speakers.
-
Buying switching options you won’t use
The models described differ in several ways, including single stereo paths, source and speaker switching, and additional headphone or subwoofer paths.
First count the sources, pairs of speakers and headphone paths you actually plan to use, then choose the switching features you need.
Key brands to consider
Palmer
According to Palmer, the MONICON M G2 is designed for a passive stereo monitoring path with controls close to hand.
- Palmer lists XLR/TRS and 3.5 mm inputs, plus XLR and 3.5 mm outputs, for a single stereo path.
- The model does not switch between two pairs of speakers.
Mackie
According to Mackie, the Big Knob Passive offers passive level control and a choice of two sources and two pairs of monitors.
- Mackie lists mono, mute and dim functions for this model.
- Mackie’s comparison does not list a headphone output for the Passive version; specifications for other Big Knob models do not automatically apply to it.
ESI
ESI describes the MoCo as a passive controller for switching between two stereo input paths and two stereo output paths.
- ESI lists source selection, separately switchable outputs, mono and mute.
- The MoCo does not convert an unbalanced input signal to balanced.
Drawmer
According to Drawmer, the CMC2 is also suited to editing setups with several monitoring options and a dedicated headphone path.
- Drawmer lists two balanced stereo inputs, an additional 3.5 mm input, two pairs of monitors, a subwoofer path and a headphone amplifier.
- The manufacturer’s claims about sound transparency are not independent test results.
PreSonus
According to PreSonus, the MicroStation-BT is designed for one pair of speakers, with Bluetooth input and an optional subwoofer bypass.
- PreSonus lists a headphone/aux output and a subwoofer bypass.
- According to PreSonus Support, USB-C is for power only and does not carry audio to a computer.
Suitable products at Joybuy
Related products coming soon.
Frequently asked questions
Can a passive monitor controller replace my audio interface for recording speech?
No. The passive models described here control or switch analogue monitoring signals; Palmer lists stereo line inputs and outputs for the MONICON M G2. You’ll still need a suitable recording path to record.
Can I connect a computer to the PreSonus MicroStation-BT using a USB-C audio cable?
Not as a USB audio device: according to PreSonus Support, the USB-C connection is for power only. For wired audio, PreSonus lists balanced TRS and 3.5 mm stereo inputs, among others.
What should I check when connecting and setting it up?
Connect the audio outputs you already have to suitable controller inputs, then connect the controller outputs to the speakers you intend to use. Check the connection type and signal routing for the specific model, and allow space for cables and plugs as well as the unit itself.
Are a guarantee and statutory consumer rights the same thing?
No. For consumer purchases, your statutory rights against the seller are set out by law; a guarantee is an additional voluntary promise with its own terms. If a product is faulty, the first step may be to ask for it to be repaired or replaced, as explained by the Verbraucherzentrale.
Does a device sold in Germany have to carry a CE mark?
Under EU guidance, CE marking is required when harmonised EU rules that require it apply to the specific product. Your Europe notes that this cannot be assumed for every product category; you cannot tell whether a particular item complies with all applicable rules solely from its product type.