Which solution is right for you?

Musicians with an HDMI camera

If you want to use an existing camera as your only video source on your home office computer, check its HDMI output and your computer’s USB port. Elgato also highlights camera compatibility and possible on-screen overlays as important considerations.

Musicians with separate instrument audio

If your camera feed and microphone or audio interface connect separately to your streaming software, the signal paths, levels and synchronisation all need to work together. OBS Project notes that setting up the same audio source twice can cause an echo.

Musicians using multiple camera angles

If you want to switch between several cameras during a performance, you’ll need more than the single HDMI input on a capture stick. Blackmagic Design describes the ATEM Mini Pro as a video mixer with four HDMI inputs, USB webcam output and an audio mixer.

What should you look for when buying?

What you need What to check before buying Who is this most relevant to?
Compatible camera input Check that the HDMI output has no distracting overlays, and confirm the supported signal format, USB requirements and, where applicable, the capture device’s hardware revision. If I want to use my existing HDMI camera as my only video source, compatibility is my priority. Around 34% of consumers would rank camera compatibility as their main concern.
Music audio without duplication or distortion Check the connection type and audio source, the level meter and monitoring in OBS, and the results of a test recording. OBS Project warns that capturing the same source twice can cause echoes. If I want my instrument audio to go into the streaming software separately from the camera feed, I want to fine-tune the signal paths. Around 33% of consumers would put music audio first.
Additional HDMI monitor output Check that the exact model you’re considering has HDMI Out, and confirm the resolutions and frame rates supported for passthrough and capture. Elgato and AVerMedia list different limits for their respective models. If I want to connect an HDMI monitor as well as my computer, I need a capture device with the right output. Around 20% of consumers would name a separate monitor output as their main concern.
Switching between camera angles Check how many HDMI inputs you need, along with the USB output and audio routing of the specific mixer. Blackmagic Design lists four HDMI inputs and USB webcam output for the ATEM Mini Pro. If I want to switch between several cameras during a performance, the number of video sources is crucial. Around 13% of consumers would rank switching angles as their main concern.

Common buying misconceptions

  • ‘4K’ doesn’t automatically tell you the recording quality

    The input, HDMI passthrough and recording may all have different resolution and frame rate limits. Elgato’s 2160p60 specification for Cam Link 4K depends on using a compatible camera and the latest model; AVerMedia lists a maximum of 1080p60 for recording and passthrough on the GC311.

    For the exact device and its hardware revision, check the input signal, recording format and, where applicable, HDMI output separately.

  • A capture card won’t automatically sort out your music audio setup

    HDMI audio, analogue line-in and a separate audio source in OBS are different signal paths. Capturing the same audio device twice can cause an echo, while a level that’s too high can distort the sound.

    Before buying, make a note of where your instruments and microphones will connect, and which source OBS should actually stream. Check the levels and mix with a short test recording.

  • A single camera input isn’t a substitute for an HDMI output or a multi-camera mixer

    An HDMI input for your computer doesn’t automatically give you an output for a separate monitor or inputs for multiple cameras.

    Before buying, decide whether you only want to connect one camera, connect an HDMI screen as well, or switch between multiple cameras.

Key brands and product ranges

Elgato

Cam Link 4K is an HDMI-to-USB camera input device; Game Capture 4K S is a different product range, with HDMI passthrough and analogue stereo line-in.

  • The different signal paths make it easier to choose between connecting just one camera and connecting a monitor as well.
  • With Cam Link 4K, check camera compatibility, USB requirements and hardware revision. The specifications for Game Capture 4K S come from the manufacturer and aren’t an independent test for music livestreams.

AVerMedia

The Live Gamer MINI GC311 is a capture solution with HDMI passthrough.

  • AVerMedia says the GC311 supports recording and passthrough up to 1080p60, as well as HDMI audio.
  • AVerMedia rules out 4K, HDR and HDCP-protected signals for this model. The manufacturer’s passthrough specification doesn’t automatically describe the OBS preview.

Magewell

USB Capture HDMI Gen 2 captures an HDMI signal with embedded audio; USB Capture HDMI Plus is a different version, with HDMI passthrough and 3.5 mm audio connections.

  • The listed connections make it easier to distinguish between models based on the video and audio paths you need.
  • The Plus version’s features aren’t automatically included with Gen 2. According to Magewell, frame rate and output may depend on USB bandwidth.

Blackmagic Design

The ATEM Mini Pro is a video mixer for multiple HDMI sources, not a simple capture stick for a single camera.

  • Blackmagic Design lists four HDMI inputs, USB webcam output and an audio mixer.
  • You won’t necessarily need these multi-camera features if your setup only has one video source.

Joybuy products for HDMI capture with passthrough

This selection features HDMI capture devices with passthrough for camera and monitor setups. If you want to switch between multiple camera angles, a video mixer is a different type of device.

4K video capture card with USB 3.0 for cameras and livestreams

4K video capture card, USB 3.0, 5 ports

For using one camera as your video source while passing an HDMI signal through to a monitor.

According to the product description: 4K/60 Hz input and passthrough; recording at 1080p/60 Hz.

View at Joybuy
4K video capture and recording card with 5 ports

4K video capture and recording card, 5 ports

For a camera stream where you also want to send an HDMI signal to a separate monitor.

According to the product description: 4K/60 Hz input and loop-through; recording at 1080p/60 Hz.

View at Joybuy
4K HDMI capture card with USB 3.0, black and red

4K HDMI capture card, USB 3.0, black + red

For streaming with an HDMI camera when you also need HDMI passthrough.

According to the product specifications: input up to 4K/30 Hz and recording at 1080p/60 Hz. The description lists PCs and laptops as compatible devices.

View at Joybuy
4K USB 3.0 video capture card with audio recording and 5 ports

4K USB 3.0 video capture card with audio recording

For camera and monitor setups where you also want to pass the HDMI signal through to a screen.

According to the product description: 4K/60 Hz input and passthrough; recording at 1080p/60 Hz.

View at Joybuy
VIELLAN 4K HDMI video capture card with USB 3.0

VIELLAN 4K HDMI video capture card, USB 3.0

For an HDMI camera with a separate monitor when you need both recording and passthrough.

According to the product specifications: 1080p recording and 4K HDMI passthrough. The product details also list a microphone input and headphone output, and compatibility with Windows, macOS and Linux.

View at Joybuy

Frequently asked questions

How do I set up a camera feed and a separately connected microphone in OBS?

Add the capture card as a video capture device, then add your separate microphone or audio interface as an audio input source. Check the levels in a test recording; if the same audio device is also captured globally and in the scene, it can cause an echo.

Is HDMI passthrough the same as a lag-free preview in OBS?

No. The HDMI output sends the signal to a separate screen, while the video source in OBS has its own buffering and preview settings. OBS Project describes these settings separately, so test the picture and music audio together before you go live.

Which additional connections or costs should I check before buying?

Check whether the specific model includes the HDMI cables and audio connections your setup needs. Elgato explicitly states that an HDMI cable isn’t included with the Game Capture Neo. If a purchase is faulty, remember that your statutory rights against the seller are separate from any voluntary manufacturer’s warranty.

Do I need an additional GEMA licence for a music livestream from Germany?

It depends on the music, platform and access model. According to GEMA, a paid livestream on YouTube will generally require a livestreaming licence; it treats use differently for a freely accessible stream with entirely voluntary donations. Other rights, such as those for recordings you use, may also be required. You’ll therefore need to consider the music you use and the access conditions in each individual case.