Teams sharing CAD files
When several people work on projects, managing simultaneous changes and keeping project paths consistent are essential. Autodesk Support explains that file locking depends on the operating system or file access environment.
A NAS can provide shared file storage, but it doesn’t replace reliable CAD file locking or a PDM system for controlled check-in and check-out. First, check that your CAD software and the way your team works support a NAS share; Autodesk lists NAS and SAN devices as outside the supported storage environments for AutoCAD. You should also plan for a separate, restorable backup and network connectivity that suits your whole studio.
When several people work on projects, managing simultaneous changes and keeping project paths consistent are essential. Autodesk Support explains that file locking depends on the operating system or file access environment.
Central storage should be backed up separately, with a backup you can actually use to restore project versions. The German Federal Office for Information Security explicitly distinguishes RAID mirroring from data backups.
When planning, consider usable storage and the network path to each workstation, not just raw capacity or the ports on the NAS. The drive configuration you choose must also suit the rest of your network equipment.
Suitable when: a small number of people share files, and you’ve checked in advance how the CAD software handles changes, references and project paths.
Trade-off: A shared folder brings files together, but access to individual files may need to be coordinated manually. Autodesk describes this as a possible way of working for small teams using Inventor.
Suitable when: your team needs controlled check-in and check-out or exclusive editing. Autodesk lists Vault as an option for Inventor, while SOLIDWORKS describes check-out in its PDM system.
Trade-off: A controlled workflow needs the right software and set-up; the NAS enclosure alone doesn’t provide PDM functionality.
Autodesk Support highlights that file locking and path requirements depend on the software, while the German Federal Office for Information Security distinguishes RAID mirroring from a data backup. The table below matches the key buying decisions to the needs of your studio.
| Buying consideration | What to check before buying | Who should pay particular attention? |
|---|---|---|
| Collaborative editing | Check the CAD application, file locking, write permissions, external references and consistent project paths for your team’s intended workflow. | If several people edit the same file, I want to avoid conflicts and inconsistent project paths. Around 28% of consumers put conflict-free collaborative editing first. |
| Restorable backup | Plan for a backup destination separate from the live NAS, and test restoring a complete project folder. | For projects that are hard to replace, I need a copy that lets me restore earlier project versions. For around 28% of consumers, this ability to restore is their top buying priority. |
| Usable storage | Consider project size, retention requirements, available bays and the usable capacity of your planned drive configuration separately. | As projects and their versions grow, I want to plan for suitable usable storage and possible expansion. Around 17% of consumers prioritise capacity and room to grow. |
| Network path | Check the NAS and workstation ports, switches and the rest of the network path together. | When transferring large files frequently, I want to know whether the entire connection to the workstation can keep up. Around 16% of consumers put transfer speed first. |
| Access management | Test user accounts, groups and shared-folder permissions against the different project roles. | When team members have different responsibilities, I want to assign read and write access accordingly. Around 11% of consumers say separate access management is their main concern. |
A network share doesn’t automatically control who can edit a file. Autodesk Support lists NAS and SAN devices as outside the supported storage environments for AutoCAD; file locking depends on the file access environment.
Before choosing a device, decide whether your team simply needs to store files or coordinate work on the same models, then check the workflow with your CAD software.
A PDM system may require additional set-up and ongoing management.
Mirroring replicates changes at the same time, so it doesn’t reliably protect against accidental overwriting or malware. The German Federal Office for Information Security does not count RAID mirroring as a data backup.
Plan for a backup destination separate from your live drive array, and test whether you can restore a complete project folder.
A separate backup destination and time for restore tests should be part of your plan.
Raw capacity won’t necessarily match usable storage; the connection to your workstation also depends on the other components in your network.
Compare the full drive configuration and check the network path from the NAS to your workstations.
Depending on your plan, you may need drives, a suitable expansion unit or additional network equipment.
The DiskStation DS925+ is a four-bay NAS with two built-in 2.5 GbE ports.
The TS-464-8G combines four SATA bays with two 2.5 GbE ports and the option to upgrade to 10 GbE using a PCIe card.
According to the manufacturer, the Lockerstor 4 Gen3 AS6804T offers four SATA drive bays, four M.2 slots, and built-in 10 GbE and 5 GbE ports.
According to the manufacturer, the F4-424 is a four-bay option with two 2.5 GbE ports and two M.2 slots.
According to the manufacturer, the NASync DXP4800 Plus has four SATA bays, along with one 10 GbE port and one 2.5 GbE port.
The Synology NAS enclosures below are options for centralised, shared file storage. Whether they suit your CAD workflow depends on the software you use and how your team is organised.
No image available
This NAS could work as central file storage if your CAD software and team workflow support a shared folder; it doesn’t replace a PDM system.
Four bays, two 2.5 GbE ports and M.2 NVMe SSD caching. You can expand it to support nine drives with the separately available DX525. Drive compatibility is limited to Synology drives.
No image available
Its eight bays may suit shared storage with greater capacity needs; you’ll still need to check separately whether it’s suitable for your CAD workflow.
Two built-in 2.5 GbE ports and optional 10 GbE. The manufacturer’s figure of up to 360 TB of raw storage refers to an expanded set-up and should not be confused with usable capacity.
Not simply because everyone can access the shared folder. For AutoCAD, file locking must work in the file access environment; Autodesk Support lists NAS and SAN devices as outside the supported storage environments for AutoCAD. For shared Inventor files, Autodesk Support describes manually coordinating access as a possible approach for a small number of users, and names Vault as an alternative with check-in and check-out. Test the workflow with the CAD application you actually use.
Set user and write permissions, then test consistent project paths across your workstations, as well as opening, editing and saving a representative file with its references. For shared Inventor projects, Autodesk Support highlights using the same path and setting suitable permissions as important parts of the set-up.
No. The German Federal Office for Information Security explicitly distinguishes RAID mirroring from data backups, because changes are replicated across the drive array at the same time. Plan for a separate backup and test that you can restore a complete project folder.
If personal data is processed, controllers and processors must implement appropriate technical and organisational measures under Article 32 of the GDPR. The German Federal Commissioner for Data Protection and Freedom of Information explains that these measures must be proportionate to the risk. Your studio must assess its processing to establish whether specific project files contain personal data and which measures are appropriate.