Who is a CAD NAS right for?

Designers with multiple project versions

You want to restore earlier versions of files or folders and need a clear plan for snapshots or versioning.

Teams sharing a CAD folder

Several people need access to project files. The right permissions and reliable file locking matter to your workflow – not just the number of network ports.

Offices with hard-to-replace archives

You want to be able to carry on working if your NAS fails, so you’re planning a separate backup and a restore test.

What should you look for when buying?

First, decide which recovery scenario matters for your CAD archive. Then check that the NAS, backup and network connection are suited to your workflow.

What matters What to check before buying Who it matters to
Earlier project versions Check snapshot support for the model and file system, as well as scheduling, retention and the ability to restore an entire project folder. If I need to roll back a drawing or an entire project folder, I want to plan how often versions are saved and how long they’re kept. Around 26% of consumers prioritise restoring earlier project versions.
Protection if the NAS fails Plan for a separate backup destination, a backup schedule and a tested restore process. If the NAS is lost or becomes unusable, I need a separate copy that lets me restore my CAD data. Around 26% of consumers put this type of failure protection first.
Shared team access Test shared folders, permissions and file locking with the CAD application you actually use. If several people access the same project folders, I want to avoid conflicts when working together and assign appropriate permissions. Around 21% of consumers prioritise team access.
Usable archive space Compare your planned data and expected growth with the usable capacity of the drive configuration; check drive compatibility and what’s included. I need enough usable storage for current files and earlier project versions, not just a high quoted capacity. Around 16% of consumers put space for a growing archive first.
Transfer times Make sure the NAS connection, computer connection and entire network path work well together. If I often move large CAD files, I want to know whether my existing network connection is up to the task. Around 11% of consumers put transfer times first.

Common buying mistakes

  • Relying on snapshots or RAID as your complete protection against failure

    Snapshots on the same NAS preserve earlier points in time, but they won’t protect you against every kind of device loss. The German Federal Office for Information Security also points out that RAID mirroring isn’t a backup, because changes are mirrored at the same time.

    Plan for local versions and a separate backup as two distinct tasks. Regularly test whether you can actually restore the backup.

    A separate backup destination means extra administration, and you’ll need to plan and test the restore process too.

  • Confusing raw capacity with usable archive space

    Usable capacity depends on the drives and storage configuration. QNAP states that the TS-264-8G is supplied without hard drives.

    Before buying, work out the drive configuration, usable capacity and storage needed for earlier project versions. Also check drive compatibility and possible expansion options.

    You’ll need to budget for hard drives separately with the TS-264-8G.

  • Assuming network ports guarantee CAD performance or smooth teamwork

    A connection specification alone won’t tell you how quickly a CAD folder will transfer across the entire network path. Autodesk describes file locking as a function of the operating system or file access software, so the specific workflow also affects how well people can work together.

    Check the connection between the NAS and computer, and test shared folders and file locking with the CAD application you actually use. Autodesk notes that it can’t test and certify every NAS for its applications.

Brands and relevant product ranges

The brands below are examples to help guide you, based on specific product ranges and features. The features listed don’t automatically apply to every model from a brand.

Synology

The DS925+ is a documented example of a four-bay NAS with Snapshot Replication when configured with Btrfs.

  • Synology says the DS925+ has two 2.5GbE ports. With the separately available DX525, it can be expanded to support up to nine drives.
  • Check drive compatibility and the snapshot requirements for your specific configuration. Manufacturer test results don’t measure your CAD workflow.

QNAP

The TS-264-8G is a two-bay model. QNAP documents snapshots and versioned backups through HBS 3 for compatible configurations.

  • QNAP lists two 2.5GbE ports for the TS-264. HBS 3 supports backup, restore and synchronisation between compatible destinations.
  • According to QNAP, the TS-264 is supplied without hard drives. For smart versioning in HBS 3, check the documented software version and make sure a backup job is set up.

ASUSTOR

The Lockerstor 2 Gen2 AS6702T is a two-bay model with 2.5GbE. Snapshot Center is relevant for compatible models and configurations.

  • The model page lists M.2 slots. With compatible configurations, Snapshot Center can help you restore earlier versions.
  • According to ASUSTOR, snapshot features depend on the model. M.2 storage and local snapshots don’t replace a separate backup.

TrueNAS

The TrueNAS Mini range is designed for configurable file storage and ZFS snapshots, making it relevant for a managed NAS workflow.

  • TrueNAS describes shared folders, permissions and snapshots for Mini devices.
  • The number of bays and network ports varies across the range, so check which version is right for your needs.

NAS selection at Joybuy

This selection of NAS devices is for CAD archives where you need to store multiple project versions and make files available centrally.

Synology DiskStation DS925+, 4-bay NAS with dual 2.5GbE

Synology DiskStation DS925+ (4-bay, dual 2.5GbE)

For a CAD archive where you want to restore earlier project versions using correctly configured Snapshot Replication.

Four drive bays; two 2.5GbE ports. Expandable to up to nine drives with the separately available DX525.

Check drive compatibility and the snapshot requirements for your specific Btrfs configuration.

View at Joybuy
Synology DiskStation DS1825+, 8-bay NAS with dual 2.5GbE

Synology DiskStation DS1825+ (8-bay, dual 2.5GbE)

For a growing CAD archive where multiple internal drive bays are important for planning your storage.

Eight drive bays; two 2.5GbE ports. Optional 10GbE; the product name lists support for up to 360 TB.

Before installing drives, check their compatibility and calculate the usable storage for your configuration.

View at Joybuy

Frequently asked questions

Does RAID replace a backup of my CAD projects?

No. The German Federal Office for Information Security explains that mirroring also copies data changes, so it doesn’t replace a backup. Plan a separate backup and test that you can restore it.

How do I set up multiple project versions that I can restore?

On a suitable volume, set up a snapshot schedule or a versioned backup job, then test restoring an entire project folder. If you’re using QNAP HBS 3, check that you have the right software version and retention periods. A snapshot preserves a point in time; it doesn’t automatically record every edit.

Which additional components should I check before buying a NAS?

Check which hard drives are suitable, whether you need a separate backup destination and whether you’ll need any additional network equipment. QNAP says the TS-264 is supplied without hard drives; the DX525 expansion unit for the DS925+ is available separately.

Is NAS storage for CAD files required or prohibited in Germany?

There’s no blanket requirement to use a NAS, nor a blanket ban on doing so. If you process personal data, controllers and processors must take appropriate technical and organisational measures based on the risk, in accordance with Article 32 of the GDPR. The specific safeguards you need depend on how the NAS is used.

Can my CAD team work on the same drawing at the same time?

You can’t tell from the NAS model name alone. Autodesk describes file locking in AutoCAD as a function of the operating system or file access software. Test the CAD application you actually use to make sure file locking and permissions work as needed.