Who is a NAS suitable for?

CAD users who transfer files frequently

If you regularly move large project folders between your workstation and central storage, check the entire network path. Autodesk describes possible delays when working with network files.

Teams working on projects collaboratively

If several people need access to the same drawings or assemblies, intact references and a suitable process for access rights and file locking are essential. SOLIDWORKS PDM describes an exclusive check-out right for this purpose.

Those responsible for recoverable archives

If project versions would be difficult to replace, you need to plan usable storage, separate backups and a tested recovery process together. The German Federal Office for Information Security explicitly distinguishes RAID mirroring from data backup.

What should you look for when buying?

Criteria What to look for when buying Who is it most relevant to?
Network path and transfers Check the connections on the NAS and workstation, as well as the devices in between; transfer typical project folders. If I often move large project folders between my workstation and storage, the entire network path matters — not just the NAS connection. Around 36 % of consumers rank frequent transfers as their top priority.
Collaborative working Check whether the specific CAD application supports the storage location, and clarify access and file-locking processes. If several people edit the same drawings, I need reliable references and controlled access rather than just shared storage. Around 29 % of consumers prioritise collaborative CAD work.
Recovery Plan for a separate backup destination and test restoring a complete project folder. If a project version is lost or changed by mistake, I want to be able to restore it precisely. Around 21 % of consumers rank recovery as their top priority.
Usable storage and future growth Estimate your existing projects and future growth; work out usable space based on the drives and configuration you plan to use. As my project archive grows, I need enough usable space and want to plan the drive configuration accordingly. Around 14 % of consumers prioritise expanding their archive.

Common misconceptions

  • Assuming connection speed guarantees CAD performance

    A fast connection on the NAS does not prove that the entire network path is fast enough or that a CAD application will work with files there without issues. Autodesk describes delays when working with network files.

    Check the connections at both ends and the devices in between. Test typical project folders, including their references, before deciding on your workflow.

  • Confusing a central shared folder with managed collaborative working

    A shared storage location does not automatically determine who can edit a file. SOLIDWORKS PDM describes an exclusive check-out right; a standard shared folder is not the same thing.

    Before buying, decide whether you simply need to store files or manage collaborative editing. Then check whether your CAD application's workflow supports this.

  • Treating RAID or raw drive capacity as a complete archive plan

    Usable capacity depends on the drives and configuration. The German Federal Office for Information Security does not count RAID mirroring as a backup.

    Plan storage and recovery separately. Check the usable space with the drives you intend to use, and test restoring a complete project folder.

Key NAS brands at a glance

Synology

The DS225+ offers two bays and 2.5 GbE, while the DS925+ is a four-bay option with two 2.5 GbE ports and room for expansion.

  • Synology lists file and backup features for these models. Published throughput figures for the DS225+ are based on internal testing.
  • Synology refers users to its drive compatibility list. The features listed do not prove that every CAD file can be edited directly on the NAS.

QNAP

The TS-464 has four bays and two built-in 2.5 GbE ports; QNAP lists an optional PCIe upgrade to 10 GbE.

  • QNAP documents network and M.2 expansion options for this model.
  • Hard drives and SSDs are sold separately. Connection specifications are not a performance measurement for your own CAD workstation.

UGREEN

According to UGREEN, the NASync DXP4800 Plus is a four-bay option with built-in 10 GbE and 2.5 GbE connections.

  • The built-in 10 GbE connection may be relevant if your network path is equipped to support it.
  • The connection specification guarantees neither a particular CAD transfer rate nor support for a specific CAD application.

ASUSTOR

According to ASUSTOR, the Lockerstor 4 Gen3 AS6804T offers four M.2 slots, two 10 GbE connections and two 5 GbE connections.

  • The connection and storage options give you different ways to plan your network path and storage setup.
  • ASUSTOR notes that its published performance figures come from laboratory testing and may vary depending on the environment.

NAS models at Joybuy

The Joybuy models below include two-, four- and eight-bay NAS options for central storage and frequent transfers. One model lists 10 GbE as an optional upgrade.

Synology DiskStation DS925+ four-bay NAS

Synology DiskStation DS925+

A four-bay option for a growing project archive and frequent transfers; this does not guarantee that you can edit CAD files directly on a NAS shared folder.

Four drive bays, two 2.5 GbE ports and, according to the product name, expandable to up to nine bays.

View at Joybuy
Synology DiskStation DS1825+ eight-bay NAS

Synology DiskStation DS1825+

The eight-bay design is an option if you want to organise a larger project archive centrally; on its own, it says nothing about CAD performance.

Eight drive bays and two 2.5 GbE ports; according to the product name, 10 GbE is optional.

View at Joybuy
Synology DS225+ two-bay NAS

Synology DS225+

A compact two-bay option for central storage if the planned usable capacity is enough; according to the product name, the device is supplied without drives.

Two drive bays, one 2.5 GbE connection and one Gigabit LAN connection. The product name lists an Intel Celeron J4125 Quad-Core processor and 2 GB DDR4 RAM, expandable to 6 GB.

View at Joybuy

Frequently asked questions

Can I edit AutoCAD drawings directly on any NAS?

There is no one-size-fits-all answer. Autodesk lists NAS and SAN storage as outside the supported storage environments and describes possible issues when saving drawings with external references. Check the workflow for your application and test representative projects.

Is a 10 GbE connection on the NAS enough for fast transfers?

No. The NAS connection alone does not tell you how fast transfers will be at your workstation. Check its connection and the devices in between too; Autodesk lists network issues as a possible cause of slow work with network files.

Does RAID replace a backup of CAD projects?

No. The German Federal Office for Information Security does not count RAID mirroring as a backup. Plan a separate backup destination and test restoring your files.

Does a shared NAS folder manage collaborative editing?

A shared folder alone does not provide controlled file editing. SOLIDWORKS PDM describes an exclusive check-out right; check whether a similar process suits your CAD application and workflow.

Which additional components should I check before buying?

Check whether you already have suitable drives, the network equipment you need and a separate backup destination. QNAP says that hard drives and SSDs for the TS-464 are sold separately; Synology refers users to its drive compatibility list for the DS225+.