Who is an NAS for CAD projects suitable for?

Teams working on CAD files together

If several people are working on projects, agree how changes, access rights and, where needed, file locks will be managed before using an NAS shared folder as the place to work. Autodesk describes NAS support as application-specific and outlines separate procedures for file locking.

Teams with project archives that are hard to replace

If you need to recover older versions after accidental deletion, hardware failure or malware, plan for a separate backup and test that you can restore your files. The German Federal Office for Information Security (BSI) distinguishes between data backup and recovery.

Teams with a growing collection of files

As project folders grow, it’s the usable storage capacity and network path for future files that matter, not just the advertised raw capacity. Synology points out that usable capacity depends on the drives and RAID configuration.

What should the team look for when buying?

First, clarify how your CAD application manages projects and simultaneous changes. You can then plan the storage, network and complete backup solution to suit the team’s workflow.

Consideration What to check before buying Who is it most relevant to?
Recoverable project versions Plan for a separate backup destination and versioning; test restoring a project file along with any required references. The BSI treats backup and recovery as parts of a backup strategy. If I need to recover older project versions after a problem, recovery is my top priority. Around 25% of consumers are likely to share this priority.
Collaboration without file conflicts Choose the application and project format; test saving, references and simultaneous access within the planned workflow. Autodesk notes that NAS support and file locking depend on the application. If several team members work on the same projects, I need clear rules on who can make changes and when. Around 25% of consumers are likely to prioritise a reliable shared workflow above all else.
Usable storage and expansion Allow for current project folders, growth and retention; calculate usable capacity for the specific drives and RAID configuration. Synology highlights the difference between raw and usable capacity. If the project archive keeps growing, I want to allow enough usable space for files and older versions. Around 20% of consumers are likely to prioritise storage growth.
Network and remote access Match the ports on the NAS, switch and workstation; plan for secure external access only if needed. A port alone doesn’t guarantee the same speed at the workstation. If team members need to transfer larger files or access them from elsewhere, the actual network path is crucial to me. Around 15% of consumers are likely to make network access their main priority.
Total purchase and ongoing support Plan the package contents, suitable drives, separate backup destination and maintenance responsibilities together. According to the manufacturer, the QNAP TS-264-8G is supplied without HDDs; Synology provides a model-specific drive compatibility list. If I’m planning the complete solution for the team, I want to factor in drives and backup as well as the enclosure. Around 15% of consumers are likely to prioritise this kind of end-to-end planning.

Which buying and planning mistakes should the team avoid?

  • Confusing RAID with an independent backup

    Mirroring can replicate unwanted changes and won’t protect against every type of damage to the device or its location. The BSI points out that RAID systems don’t replace data backups.

    Plan separate backup copies and test whether you can restore a complete project version.

  • Assuming a shared folder means CAD files can be edited without conflicts

    Whether file locking and references work depends on the application and network path. A shared folder alone doesn’t manage simultaneous changes.

    Test a representative project workflow with several team members before making the shared folder your main storage location.

  • Comparing only the enclosure or raw capacity

    An NAS enclosure without drives can’t store projects, and usable capacity depends on the drives and configuration.

    Compare complete configurations, including usable storage and a separate backup destination.

Which NAS brands are worth considering?

The model examples below showcase different features. Ports or drive bays alone don’t prove that a device is suitable for a particular CAD application or will improve your team’s workflow.

Synology

The DiskStation DS225+ is a two-bay NAS with a 2.5GbE port.

  • Synology describes storage and file management features for the DS225+.
  • Usable capacity and drive compatibility depend on the drives and configuration; check the model’s compatibility list before buying. This doesn’t confirm suitability for a particular CAD application.

QNAP

According to QNAP, the TS-264-8G offers two 2.5GbE ports, M.2 slots and 8 GB of memory.

  • Its features offer several connectivity and storage options for teams with the right network requirements.
  • QNAP supplies the TS-264-8G without HDDs. Two high-speed ports don’t guarantee the same transfer speed at an individual CAD workstation.

TerraMaster

The F2-425 is a two-bay NAS option with a 2.5GbE port.

  • TerraMaster lists an Intel quad-core processor and 4 GB of RAM for this model.
  • These manufacturer specifications don’t prove that CAD projects can be shared without issues. Drives and a separate backup must also be factored in.

UGREEN

According to UGREEN, the NASync DXP4800 Plus has four drive bays, along with 10GbE and 2.5GbE ports.

  • The extra bays and ports give you configuration options for a growing archive and a suitably equipped network.
  • Whether your team benefits depends on its network and workflow. The ports don’t confirm compatibility with a CAD application.

ASUSTOR

The AS5402T is an NAS with two main bays and two 2.5GbE ports.

  • ASUSTOR lists various storage configurations and M.2 slots for this model.
  • The two main bays still limit your SATA drive configuration options. Check drive and CAD application compatibility separately.

Related products at Joybuy

Related products will be available soon.

Frequently asked questions about NAS for CAD projects

Can our team work together on CAD files directly on any NAS?

No, you can’t assume that. Check the specific application, as well as saving, external references and file locking along the access path you plan to use. Autodesk doesn’t certify every NAS; Autodesk Fusion stores collaboratively managed project data in cloud hubs.

How can we stop changes to project files from being overwritten?

Set project-specific access rights and agree on a clear editing workflow. Test whether file locking works across the actual network path with your CAD application; a shared folder alone won’t prevent conflicts when people edit at the same time.

Is mirroring the two NAS hard drives enough for a backup?

No. The BSI distinguishes RAID mirroring from data backup, and also includes recovery in its approach to backup. Plan for an additional, separate backup destination and test that you can restore your files.

What should the team plan for when it comes to drives and ongoing support?

Check whether drives are included, and plan for suitable drives and a separate backup destination. QNAP specifically states that the TS-264-8G is supplied without HDDs; for the Synology DS225+, check the model-specific drive compatibility list.

Do data protection rules apply to CAD project folders belonging to a German association?

If the folders contain personal data, technical and organisational measures must be appropriate to the risk; Article 32 of the GDPR is relevant. Whether files contain personal data depends on their specific contents. The term CAD alone implies neither an exemption nor a specific NAS requirement.