Who is a NAS for CAD projects suitable for?

CAD users who need central project folders

If you want to organise project files centrally, first check where your CAD software stores active projects. Autodesk recommends a local workspace for Inventor; according to Autodesk, Fusion projects are stored in a cloud hub.

Designers who need backups

If you need to be able to restore earlier project versions, plan for a separate backup destination alongside your central storage, and a way to test recovery. The German Federal Office for Information Security explicitly distinguishes RAID mirroring from data backup.

CAD users with limited desk space

If the NAS is going to sit at your workstation, the enclosure, cables and airflow all need to fit the space available. If you regularly transfer large files, it’s also important to check whether your computer and the rest of your network support the connection you want.

What should you look for when buying?

First, check whether your CAD software is designed to use a NAS as active storage. Then plan for separate backups, desk space and the network connection your project files need.

Buying priority What to check before buying Who should pay particular attention?
CAD file workflow Check the CAD software, project type, reference paths and intended storage location for active files. If I use specific CAD software, I want to know in advance whether active projects belong locally, in a cloud hub or somewhere else specified by the software. Around 33% of consumers put the CAD file workflow first.
Recovery Plan for a separate backup destination, saved versions and a recovery process that has been tested in practice. If a project version is accidentally changed or deleted, I want to be able to restore it from a separate backup. Around 27% of consumers put recoverability first.
Space Check the dimensions of the specific enclosure, and allow room for connections, cables and airflow. If I have very little free desk space, the NAS and its connections need to fit sensibly. Around 20% of consumers prioritise space.
Transferring large files Make sure the network connections on the NAS, computer and other network equipment are compatible. If I regularly transfer large project folders between my computer and NAS, I want to plan the connection across the whole network. Around 20% of consumers prioritise transfer speeds.

Common buying and planning mistakes

  • Mistaking RAID mirroring for a backup

    With mirroring, changes can be applied to both drives at the same time. The German Federal Office for Information Security points out that RAID is no substitute for a backup against accidental overwriting or malware.

    Before you buy, decide where you’ll keep an additional backup and test whether you can restore a CAD project version from it.

    A separate backup drive or another backup location, along with regular recovery tests, requires extra planning and time.

  • Assuming a NAS is a universal active workspace for CAD

    Workflows vary by software: Autodesk recommends a local workspace for Inventor, Autodesk says Fusion projects are stored in a cloud hub, and SOLIDWORKS PDM manages files in its own vault.

    Check the guidance for your software and project type before deciding which files should be actively stored on the NAS.

    Depending on your CAD workflow, you may need to allow extra setup time for a different project storage location or CAD-specific management system.

  • Planning only for the NAS enclosure or raw capacity

    Some enclosures are sold without hard drives. Also, usable capacity won’t necessarily match the combined raw capacity of the drives.

    Make a component list based on the usable capacity you need, and check which drives are included. QNAP specifically states that the TS-264-8G does not include an HDD.

    Suitable drives, any additional network equipment and a separate backup destination all need to be factored into your plan.

Key NAS brands at a glance

Synology

The two-bay DS224+ and DS225+ models are worth considering for central file storage and backup workflows.

  • Synology describes shared folders, synchronisation and backup tools for the DS224+. For the DS225+, the manufacturer lists an integrated 2.5 GbE port.
  • A shared NAS folder isn’t automatically a CAD project vault. Check your software’s intended workflow separately.

QNAP

The TS-264-8G is a two-bay model that lets you factor multiple high-speed network connections into your setup.

  • QNAP lists two 2.5 GbE ports and enclosure dimensions of 165 × 105 × 226,5 mm (H × W × D) for the TS-264-8G.
  • QNAP states that HDDs are not included. Check what comes in the box, and allow enough space for the drives and cables.

TerraMaster

The F2-425 is a two-bay model with a 2.5 GbE port.

  • TerraMaster lists a 2.5 GbE port for the F2-425.
  • The F2-425 and F2-425 Plus are different model names. Before buying, check the exact version and its specifications.

UGREEN

The NASync DH2300 is a two-bay option for central storage, if a 1 GbE connection suits your planned network setup.

  • UGREEN lists a 1 GbE LAN port for the DH2300.
  • UGREEN states that hard drives are not included. Also check that the connection is suitable for the planned link to your computer and network.

NAS models at Joybuy

These Synology models at Joybuy offer different numbers of drive bays and network connections. Compare the storage you need with the space available, and plan for drives and a separate backup to suit your CAD workflow.

Synology DS225+ 2-Bay NAS

Synology DS225+ 2-Bay NAS

For central file storage with two drive bays; check that the capacity you need and the desktop enclosure will fit your workspace.

Listed in the product title: Intel Celeron J4125, 2 GB DDR4 RAM, expandable to 6 GB, 2.5 GbE and Gigabit LAN, plus an enclosure with drive bays but no hard drives. Mirroring is no substitute for a separate backup.

Joybuy
Synology DiskStation DS925+ 4-Bay NAS

Synology DiskStation DS925+ 4-Bay NAS

For setups that need four drive bays and two 2.5 GbE connections; measure the available space on your small desk before you buy.

Listed in the product title: expandable to up to nine bays and an M.2 NVMe SSD cache. Check which components are included and whether your planned network setup can make use of the connections.

Joybuy
Synology DiskStation DS1825+ 8-Bay NAS

Synology DiskStation DS1825+ 8-Bay NAS

For setups that need eight drive bays and two 2.5 GbE connections. If you have a small desk, take particular care to check that there’s enough room for the enclosure and its connections.

Listed in the product title: optional 10 GbE and a metal enclosure. Check that these connections and the number of drives you have in mind suit your actual workflow.

Joybuy

Frequently asked questions

Can I work directly in a NAS folder in Autodesk Inventor?

Not as a general rule: in its Inventor help, Autodesk recommends creating the workspace locally rather than at a network location, working locally and then copying files to the network. Check the guidance for your specific Inventor version and project type.

Can a NAS replace the storage for Autodesk Fusion projects?

A NAS won’t simply replace Fusion’s usual project location: Autodesk describes Fusion projects as content in a cloud hub. You can use a NAS for separately exported or otherwise backed-up files; the right export and recovery method depends on the project content you need.

Are two mirrored hard drives enough for a backup?

No. The German Federal Office for Information Security explicitly distinguishes RAID mirroring from data backup, because changes can be applied to both drives. Plan for a separate backup destination and a recovery process you’ve tested.

What should I plan for besides the NAS enclosure?

For each model, check whether hard drives are included, and factor in the network connection and a separate backup destination. QNAP specifically states that the TS-264-8G is supplied without an HDD; UGREEN also notes that hard drives are not included with the DH2300.

What data protection obligations apply to CAD files stored on a NAS in Germany?

If you store personal data as part of processing covered by the GDPR, controllers and processors must put in place appropriate technical and organisational measures that are proportionate to the risk, according to the German Federal Commissioner for Data Protection and Freedom of Information. Whether this applies to your specific files and role can’t be determined from a general buying scenario; a NAS product specification alone does not establish GDPR compliance.