Who is a NAS for CAD projects suitable for?

A growing CAD archive

If you’re keeping an increasing number of project versions, consider the number of drive bays and the usable capacity of your planned setup. Synology notes that usable capacity depends on the drives and configuration.

A team sharing drawings

If you want to edit files directly over the network, either individually or in turn, check shared folders, file locking and the workflow with your specific CAD application. Autodesk doesn’t provide blanket certification of NAS devices for its products.

Those responsible for restoring projects

If you need to keep earlier project versions available after accidental deletion or a failure, plan a separate backup and check that you can restore the files. The German Federal Office for Information Security (BSI) notes that mirroring alone is no substitute for a backup.

What should you look for when choosing one?

Start by planning your usable storage and expected growth. Then decide whether the NAS will be used only as an archive or also for editing CAD files directly, and allow for a separate backup.

What matters What to look for when buying Who it matters most to
Usable capacity and growth Estimate your current storage needs and future growth; check drive compatibility and the usable capacity of your planned configuration. I want to allow enough space for new CAD projects and older project versions. Around 29% of consumers prioritise usable capacity and growth.
A reliable CAD file workflow Check the application and version, sharing permissions, and how opening, saving and simultaneous access work with test projects. If I’m collaborating on files, the workflow needs to work with my CAD software. Around 24% of consumers put the CAD file workflow first.
Restoration and a separate backup Plan for a separate backup destination and test the restoration process; don’t treat mirroring as your only backup. I want to be able to recover earlier project versions after accidental deletion or a failure. Around 23% of consumers prioritise restoration and a separate backup.
Transfers over your existing network Check that the NAS connections are compatible with your workstation, switch and the rest of your network. If I regularly transfer large project folders, I want the network equipment to be suitable for the rest of the connection. Around 12% of consumers prioritise transfer speed.
Total cost of a ready-to-use setup Consider what’s included, compatible drives, a backup destination and any network equipment you may need. I want to know what else I’ll need for my planned setup before making a decision. Around 12% of consumers prioritise the total cost of the solution.

Which mistakes should you avoid?

  • Assuming drive capacity equals usable archive space

    Usable capacity depends on the drives you install and how storage is configured. Synology specifically points out that these factors affect capacity.

    Compare your expected CAD archive with the usable capacity of the specific compatible drives you’re planning to use.

    Depending on your plans, you may need additional or larger compatible drives.

  • Relying on mirroring as your only backup

    Mirroring also copies deletions and file errors. The BSI explains that it therefore can’t replace a separate data backup.

    Keep a separate copy and regularly check that you can restore your project files from it.

    A dedicated backup destination and regular restoration checks take extra effort.

  • Assuming fast network connections guarantee CAD compatibility

    A network connection alone doesn’t guarantee that file locking will work or that the NAS is suitable for the workflow of a particular CAD application. Autodesk doesn’t provide blanket certification of NAS devices for its products.

    Before using the NAS for shared production work, test the complete workflow with your specific application and suitable test projects.

    Depending on your setup, you may need suitable network equipment and time to test the workflow.

Which brands and model ranges are worth considering?

The notes below relate to the model ranges mentioned. Connections and bay counts don’t replace checking your specific drives and CAD workflow.

Synology

The DS225+ and DS925+ are models with two and four internal drive bays respectively.

  • Synology lists integrated 2.5GbE for the DS225+ and four internal bays for the DS925+.
  • According to Synology, usable capacity depends on the drives and configuration. Also check compatibility for the specific model.

QNAP

The TS-264-8G is a two-bay option with additional network and M.2 connections.

  • QNAP lists two 2.5GbE ports and two M.2 slots.
  • According to QNAP, the TS-264-8G is supplied without HDDs. Extra connections don’t add more internal SATA bays or prove that the NAS is suitable for every CAD application.

ASUSTOR

The Lockerstor 4 Gen2 AS6704T combines four drive bays with M.2 slots.

  • ASUSTOR lists four SATA bays, four M.2 slots and two 2.5GbE ports.
  • According to ASUSTOR, this model requires an optional card for 10GbE.

UGREEN

The NASync DXP4800 Plus is a four-bay option with a 10GbE connection.

  • UGREEN lists four SATA bays, plus one 10GbE port and one 2.5GbE port.
  • According to UGREEN, hard drives aren’t included. The manufacturer’s peak transfer figures don’t indicate the CAD working speeds you’ll achieve.

TerraMaster

The F2-425 and F2-425 Plus are two-bay alternatives with different network specifications.

  • TerraMaster lists one 2.5GbE port for the F2-425 and two 5GbE ports for the F2-425 Plus.
  • The manufacturer’s website gives conflicting processor and system specifications for the F2-425 Plus. Check the exact version before taking these features into account.

NAS enclosures on Joybuy

These NAS enclosures, with two, four or eight drive bays, suit different plans for a growing CAD archive. If you’ll be editing files directly, also check the workflow with your specific CAD application.

Synology DiskStation DS925+ NAS with four bays and two 2.5GbE ports

Synology DiskStation DS925+ NAS, 4 bays, 2 × 2.5GbE

An option if you want to plan for four internal bays as your project archive grows.

The product name lists four bays, two 2.5GbE ports, M.2 NVMe SSD caching and expansion to up to nine bays. Check drive compatibility and the usable capacity of your planned configuration.

Joybuy
Synology DiskStation DS1825+ NAS with eight bays and optional 10GbE

Synology DiskStation DS1825+ NAS, 8 bays, optional 10GbE

An option if your drive plan calls for eight internal bays.

The product name lists eight bays, two 2.5GbE ports and optional 10GbE connectivity. Check that your home or office network equipment is compatible.

Joybuy
Synology DS225+ NAS enclosure with two bays, without drives

Synology DS225+ NAS, 2 bays, without drives

An option if two internal bays are enough for your current archive and planned growth.

The product name lists an Intel Celeron J4125 quad-core processor, 2 GB DDR4 RAM expandable to 6 GB, 2.5GbE and Gigabit LAN, plus RAID 0, RAID 1 and JBOD. The enclosure is described as being supplied without drives, so remember to budget separately for compatible storage.

Joybuy

Frequently asked questions

Can I edit CAD files directly on the NAS?

It depends on the application, its version and your workflow. Autodesk doesn’t provide blanket certification of NAS devices for its products, and it describes potential issues with external references in certain AutoCAD workflows. Revit has its own storage requirements. Check your software’s guidance and test opening, saving and simultaneous access with test projects before using the NAS for day-to-day work.

What will I need to set it up besides the NAS enclosure?

First, check what’s included and the drive compatibility of the specific model. QNAP lists the TS-264-8G as being supplied without HDDs, while UGREEN lists the DXP4800 Plus as being supplied without hard drives. Also allow for a suitable network connection and a separate backup destination.

What should I plan for day-to-day use and restoration?

As well as any drives you may need to buy separately, plan for a dedicated backup destination and regular restoration tests. The BSI recommends keeping physical backup media somewhere different from the computer whose data is being backed up.

Does RAID mirroring mean I don’t need an additional backup?

No. According to the BSI’s implementation guidance, deletions and file errors also affect the mirrored version. Keep important project versions in a separate backup and check that you can restore them.

What data protection requirements apply to CAD projects in Germany?

If a controller processes personal data, Article 32 of the GDPR requires appropriate technical and organisational measures. The specific processing and the risks involved are what matter. You can’t tell from the product category alone whether a particular CAD archive contains personal data.