Who is a NAS suitable for?

CAD teams working with linked project files

If you want drawings, assemblies and references to be accessible to everyone, test your specific application, consistent file paths and simultaneous editing before working directly from a NAS share. Autodesk Support describes access to network files as subject to application-specific limitations.

Design practices that need to restore project versions

If project folders need to be usable again after an editing mistake or system failure, plan a backup separate from your live storage and test the restore process. Germany’s Federal Office for Information Security also recommends ensuring that data can be restored.

Designers with a growing file archive

If you keep older versions and different project files, compare the usable storage capacity of your planned setup and its expansion options. Also check drive compatibility and exactly what’s included.

What should you look for when buying?

First, check whether your CAD workflow works with a NAS share. Then you can assess capacity, team access and network connections in light of your project library.

Criteria What to check before buying Who should pay particular attention?
Project references and CAD access Test opening, saving and references using a project copy on every intended workstation. Check the requirements for your version of the CAD software. If you rely on linked drawings and reliable saving, application compatibility matters more than connection specifications. Around 25% of consumers prioritise working references and project integrity.
Restoration The BSI does not consider RAID mirroring to be a data backup. Plan a separate backup destination and test restoring an entire project folder. If you need to retrieve earlier project versions after data loss or an accidental change, test the restore process in practice. Around 25% of consumers prioritise a separate backup that can be restored.
Usable capacity Work out how much data you have now and how much you expect it to grow. Check drive compatibility and what’s included; QNAP, for example, describes the TS-264-8G as a diskless device. If you archive different files and older projects, the key figure is the space actually available with your planned configuration. Around 20% of consumers put archive storage first.
Team access Check user permissions and consistent network paths on every workstation. For multiple Inventor users, Autodesk recommends a PDM system such as Vault. If several people need to access and edit project files, check how the shared workflow will work rather than assuming a NAS share alone will prevent editing conflicts. Around 15% of consumers prioritise controlled team access.
Transfer times Compare the NAS connection, switch, workstation connection and drive setup. A fast NAS port alone doesn’t determine how quickly a project folder will transfer. If you often transfer large project folders, the entire network path to your workstations needs to be up to the task. Around 15% of consumers put transfer times on their own network first.

Common misconceptions when buying a NAS

  • A fast NAS port guarantees smooth CAD work

    Autodesk describes potential issues with references and file locking when working with network files. A NAS’s connection specifications don’t tell you whether a specific application and project setup will work reliably with it.

    Test a representative project copy in the application you use, then check the entire network chain.

    Depending on your network, you may need to plan for compatible devices at the other end or adapt your project workflow.

  • RAID mirroring is the only backup you need

    With mirroring, changes are applied to both drives at the same time. That’s why the BSI does not consider RAID a standalone data backup.

    Create a separate backup and test whether you can restore an entire project folder, including its references.

    A separate backup destination and restore tests require additional planning.

  • Raw capacity and an enclosure are all you need for a complete project archive

    Available capacity depends on the drives and configuration. QNAP describes the TS-264-8G as a model without HDDs, while Synology directs DS225+ users to its drive compatibility list.

    Check exactly what’s included and the usable capacity of your planned drive setup.

    Allow for compatible drives and, if needed, additional storage for a separate backup.

NAS brands at a glance

Synology

The DiskStation DS225+ is a two-bay option for centralised file storage. Synology lists a 2.5GbE port for this model.

  • Synology lists file management and backup features.
  • Check the compatibility list before buying drives. Connection and manufacturer specifications do not confirm CAD approval for your specific workflow.

QNAP

The TS-264-8G is worth considering if its extra network connections and expansion options suit your existing setup.

  • QNAP lists two 2.5GbE ports, M.2 slots and an optional PCIe network expansion card.
  • The TS-264-8G is supplied without HDDs. Its hardware features do not confirm compatibility with a specific CAD application.

TerraMaster

The F2-425 is a two-bay option with, according to TerraMaster, 4 GB RAM and a 2.5GbE port.

  • The listed RAM and network features help you compare it with your requirements.
  • Specifications alone don’t tell you whether your CAD application supports working directly from a share.

ASUSTOR

The AS5402T is a two-bay option to consider if you’re looking for two 2.5GbE ports and several M.2 slots.

  • ASUSTOR lists two 2.5 Gigabit Ethernet ports and four M.2 slots.
  • Manufacturer specifications for connections or performance figures don’t confirm the speed or software compatibility you’ll get with a specific CAD project.

NAS models at Joybuy

The Joybuy models below offer centralised NAS storage with two, four or eight drive bays, along with a range of network and expansion options. None of these models is automatically approved for editing CAD projects directly from the NAS.

Synology DiskStation DS925+ NAS with four drive bays

Synology DiskStation DS925+ 4-Bay NAS

An option for a growing project archive if four drive bays and expansion options suit your planned storage needs. Test CAD access with the specific application you use.

Four drive bays; Dual 2.5GbE; expandable to up to nine bays; M.2 NVMe SSD caching.

Synology refers users to its compatibility list for drives.

View at Joybuy
Synology DiskStation DS1825+ NAS with eight drive bays

Synology DiskStation DS1825+ 8-Bay NAS

For a larger project archive, if eight drive bays and extra network options suit your setup. The model alone doesn’t confirm CAD compatibility.

Eight drive bays; Dual 2.5GbE; optional 10GbE.

View at Joybuy
Synology DS225+ NAS with two drive bays

Synology DS225+ 2-Bay NAS

A two-bay option for centralised project storage if your storage needs are modest and you plan to buy compatible drives separately.

Two drive bays; 2.5GbE and Gigabit LAN; diskless enclosure.

Check Synology’s compatibility list before buying drives.

View at Joybuy

Frequently asked questions

Can I edit CAD projects directly on a NAS?

It depends on the specific application and your workflow. Autodesk does not certify NAS devices across the board, and for AutoCAD it describes potential storage and file-locking issues with drawings that use external references on NAS or SAN systems. Test a project copy, including saving and references, rather than assuming it’s suitable based on the NAS model alone.

What should I consider when sharing an Inventor project?

For multiple Inventor users, Autodesk specifies that everyone should use the same network path and have the appropriate permissions. Autodesk recommends a PDM system such as Vault. Also check that everyone involved can access all the required parts and project files.

Does RAID 1 replace backups of my project folders?

No. Germany’s Federal Office for Information Security notes that changes are applied at the same time when using RAID mirroring. So plan a separate backup and test whether you can restore a complete project.

Do data protection rules apply when storing CAD projects in Germany?

If project folders contain personal data and the GDPR applies to the processing, controllers and processors must implement appropriate technical and organisational measures. Germany’s Federal Commissioner for Data Protection and Freedom of Information describes a level of protection appropriate to the risk. This does not mean you have to use a particular NAS model or a specific encryption option in every case.