Who is a NAS suitable for at a CAD workstation?

CAD users with active projects

If you work on drawings or assemblies, check whether your CAD software and project structure support access to network files before choosing a device. Autodesk Support highlights potential issues with certain AutoCAD workflows involving external references.

Project archives that need to be recoverable

If you keep completed projects and earlier versions of files, plan for both the recovery of individual files and a backup stored separately from the NAS. The German Federal Office for Information Security recommends regular backups and an external copy.

Workstations with growing data stores

As project folders, references and older versions accumulate, usable capacity, drive configuration and network connections all need to work together. Manufacturer specifications from Synology, QNAP and UGREEN can help you compare the bays and connections on each model.

What should you look for when buying a NAS for CAD projects?

Work locally and use the NAS for storage

A good fit if: network files cause problems in your specific CAD workflow, or you use AutoCAD with external references.

Bear in mind: You’ll need a clear process for syncing local working copies with the files on the NAS.

Work directly from the NAS share

A good fit if: your specific CAD application, project structure and network share work with your own workflow.

Bear in mind: Autodesk does not certify NAS devices across the board for its products, so a fast connection does not confirm CAD compatibility.

Archive Fusion files on the NAS

A good fit if: you want to keep a local archive copy of Fusion files that are normally stored in the cloud.

Bear in mind: Exporting to a supported archive format is a separate step and does not replace the cloud storage location.

Priority What to check when buying Who should pay particular attention?
CAD file workflow Check the CAD programme and version, external references, and how typical project files open and save. If I want to work directly from a network share, my specific CAD workflow needs to work with it. Around 28% of consumers are likely to prioritise the CAD workflow above all else.
Recovery and backup Check file versions or snapshots, a separate backup destination, and the recovery of a complete test project. If I want to recover deleted files or overwritten project versions, I need a tested recovery process and an independent copy. Around 28% of consumers are likely to prioritise recovery above all else.
Usable capacity and expansion Compare the size of complete project folders and expected growth with the storage configuration and model-specific drive compatibility. If my archive is growing, what matters is the usable space for projects and earlier versions, not just the figure on the drive packaging. Around 17% of consumers are likely to prioritise expanding their storage.
Transfer speeds to the workstation Compare the connections on your computer, NAS and network equipment in between, and try transferring large folders. If I often move large project folders, the entire network path needs to work with my computer. Around 16% of consumers are likely to prioritise copy speed above all else.
Total system cost Factor in what’s included, compatible drives, a separate backup device and power consumption. If I want a NAS that’s ready to use, I need to budget for drives and a backup destination as well as the enclosure. Around 11% of consumers are likely to prioritise the overall cost.

Common buying mistakes with NAS systems for CAD

  • Assuming a fast NAS port means you can work on CAD files without issues

    With AutoCAD, saving certain network files that use external references can stall. Autodesk Support does not certify NAS devices across the board for its products.

    Before buying, define how you plan to work with your files and test the specific application with typical project files.

    Working from a local copy may require an additional, agreed process for transferring files.

  • Relying on RAID or snapshots as your only backup

    Earlier file versions stored on the NAS and a copy stored separately from it help with different problems. A second copy on the same device is not an independent backup.

    Plan for recoverable file versions and a separate backup destination, and test your recovery process.

    An additional backup destination and regular recovery tests take up storage space and time.

  • Confusing raw capacity with usable storage

    Usable capacity depends on the drives installed and the storage configuration. QNAP describes the TS-264-8G as a system without HDDs, so you’ll need to budget for drives separately.

    Allow for complete project folders and expected growth, then check what’s included and the drive compatibility of the specific model.

    Additional drives and a separate backup device may be part of your planned setup.

  • Taking model variants or conflicting processor specifications at face value

    The manufacturer’s page gives conflicting processor specifications for the TerraMaster F2-425 Plus. Don’t assume that specifications for the Plus variant also apply to a different model without checking.

    Compare the full model number and the features that matter for your setup against the specific product listing.

Key NAS and drive brands at a glance

Synology

The DiskStation DS225+ is a two-bay option for central project files and SMB shares.

  • Synology lists 1 and 2.5 GbE connections for the DS225+ and provides a model-specific drive compatibility list.
  • These specifications don’t confirm support for a particular CAD workflow. Also check drive compatibility for the specific model.

QNAP

The TS-264-8G is a two-bay option with two 2.5 GbE connections.

  • QNAP lists two 2.5 GbE connections for this model.
  • QNAP states that the TS-264-8G is supplied without HDDs, so you’ll need to budget for compatible drives separately.

TerraMaster

The F2-425 Plus combines two HDD bays with additional M.2 slots and two 5 GbE connections.

  • TerraMaster lists two 5 GbE connections and 8 GB DDR5 for the F2-425 Plus.
  • The manufacturer’s page contains conflicting processor specifications. Don’t use the CPU specification as a basis for your decision without checking the exact variant.

UGREEN

The NASync DXP4800 Plus is a four-bay option for planned storage growth.

  • UGREEN lists 10 GbE and 2.5 GbE connections for this model.
  • The manufacturer’s specifications describe an enclosure without drives and don’t provide CAD performance measurements. Check that your other network equipment is compatible with the connections.

Seagate

IronWolf is a range of internal NAS hard drives, not a NAS enclosure.

  • Seagate describes the drives featured on its IronWolf page as CMR models.
  • That alone doesn’t confirm compatibility with a specific NAS. Check the exact drive model against the enclosure’s compatibility list.

NAS models for project storage and expansion

These models are a useful starting point for NAS project storage, with options for different expansion plans. Before choosing, check the capacity you actually need, whether drives are included and whether the connections are compatible with your network equipment.

Synology DiskStation DS925+ with four drive bays and dual 2.5 GbE

Synology DiskStation DS925+ (4 bays, dual 2.5 GbE)

For a growing project archive, four bays and the stated expandability to up to nine bays are worth considering.

Dual 2.5 GbE; an M.2 NVMe SSD cache is listed in the product name. Check drive compatibility and the network path for your setup.

Joybuy
Synology DiskStation DS1825+ with eight drive bays and dual 2.5 GbE

Synology DiskStation DS1825+ (8 bays, dual 2.5 GbE)

If you’re planning a large project archive, eight bays and the stated expansion option provide room for potential growth.

Dual 2.5 GbE; 10 GbE is listed as optional in the product name. The stated capacity of up to 360 TB is also model-specific and doesn’t replace checking the actual usable capacity.

Joybuy
Synology DS225+ with two drive bays and 2.5 GbE

Synology DS225+ (2 bays, 2.5 GbE)

If two drive bays suit your storage plan, this model is an option for a more compact project archive.

The enclosure is described as diskless, so you’ll need to budget for compatible drives separately. Specifications also include an Intel Celeron J4125, 2 GB DDR4 RAM, expandable to 6 GB, Gigabit LAN and RAID 0/1/JBOD.

Joybuy

Frequently asked questions about NAS systems for CAD

Can I work on a CAD file directly on a NAS?

It depends on the CAD application and project structure. Autodesk Support documents potential issues with AutoCAD files stored on NAS devices, particularly those involving external references. Test your specific workflow with typical files and keep a local working copy as an alternative.

Does a NAS replace Autodesk Fusion cloud storage?

No, not for files normally stored in Fusion: Autodesk Support describes Fusion as a cloud-based data management system. To keep a local archive copy, you can export supported archive files, then check how to store and recover them on the NAS.

Are RAID or snapshots enough for a backup?

No, they don’t replace a backup stored separately from the NAS. Plan for an independent backup destination and check whether you can restore complete projects from it. The German Federal Office for Information Security recommends regular backups and an external copy.

How much network speed do I need for CAD files?

It depends on how often you transfer files, how large they are and which connections your entire network path supports. Compare the connections on your workstation, NAS and any equipment in between, and test transfers with your own project folders. A fast NAS port alone confirms neither a particular throughput nor suitability for working directly on CAD files.

What extra costs and purchases should I budget for?

First, check whether the enclosure comes with drives and which models are compatible. Also allow for a separate backup destination. You can only estimate ongoing electricity costs using the actual power consumption, usage time and your tariff.