Who is a NAS for CAD and RAW photos suitable for?

People archiving projects and RAW files

If you want to store CAD versions and original camera files in one central place, make sure you plan for recovery too. The BSI explicitly distinguishes RAID mirroring from a backup.

People actively working with CAD files

If you regularly open and save drawings, check the workflow with your specific CAD application. Autodesk documents cases where DWG files on network paths unexpectedly become read-only or cannot be saved.

People managing growing RAW collections

If you regularly import original camera files or move large project folders, calculate the usable archive space and check the connection between your computer and NAS. With Lightroom Classic, photos can be stored on a network drive, but the catalogue cannot (Adobe).

What should you look for when choosing a NAS?

The key is to identify what matters most to you: recovery, usable archive space, a reliable workflow or transfer speeds for large files.

Priority What to check before buying Who should pay particular attention
Recovery A separate backup destination and a practical restore process If you want to be able to restore earlier project versions and original RAW files, plan for a backup separate from the NAS. Around 31% of consumers put recovery first.
Usable archive space Compatible drives, number of bays and capacity with your chosen RAID configuration If your CAD and RAW collection is growing, the space actually available matters more than the combined raw capacity. Around 25% of consumers put archive space first.
Workflow Open and save CAD files with your specific application; with Lightroom Classic, plan separate storage for photos and the catalogue If you want to edit files directly over the network, test the workflow with your software. Around 25% of consumers prioritise this.
Transfer speeds The ports on your NAS and computer, as well as the network equipment in between If you often transfer large project folders, the entire connection needs to meet your requirements. Around 19% of consumers put transfer speeds first.

Common mistakes when choosing a NAS

  • Relying on RAID as your only backup

    Mirroring can help if a drive fails, but it does not reliably protect against files being overwritten at the same time or malware. The BSI does not consider RAID to be a backup.

    Set up an independent backup and restore process before moving original files to the NAS as their only storage location.

  • Confusing raw capacity with available archive space

    Usable storage depends on the drives you install and the RAID configuration you choose.

    Estimate how much data you already have and how quickly you expect it to grow. Then check the available capacity for the specific configuration and make sure the drives are compatible.

    Depending on the capacity you need, you may require additional or larger compatible drives.

  • Assuming fast NAS ports guarantee a fast workflow

    The port speed alone does not tell you how quickly files will transfer between your computer and the NAS. The rest of your network equipment and your file workflow matter too. CAD files can also encounter storage issues on network paths.

    Test your actual CAD and photo workflow, and check every connection between your computer and NAS.

    Faster connections may require additional compatible network equipment alongside the NAS.

  • Treating RAW storage and a photo catalogue as the same thing

    With Lightroom Classic, photos can be stored on a network drive, but catalogue files cannot (Adobe).

    If you use Lightroom Classic, plan separate storage and backups for your photos and catalogue.

NAS brands to consider

Synology

The DiskStation DS925+ is a four-bay option for centralised files and backups.

  • Synology lists two built-in 2.5 GbE ports for the DS925+.
  • Usable storage depends on the drives and RAID settings. Check that your chosen drives are compatible using Synology’s compatibility list.

QNAP

The TS-464 is a four-bay option for file storage, backups and collaboration.

  • QNAP lists two built-in 2.5 GbE ports, as well as M.2 options and network expansion capabilities.
  • Manufacturer claims about peak speeds apply to specific configurations; hard drives and SSDs are sold separately.

ASUSTOR

The LOCKERSTOR 4 Gen2 AS6704T is a four-bay option with M.2 slots.

  • ASUSTOR lists two 2.5 GbE ports and expansion options for this four-bay model.
  • Expansion options alone do not guarantee a particular transfer speed on your own network.

UGREEN

The NASync DXP4800 Plus is a four-bay option with one 10 GbE port and one 2.5 GbE port.

  • These ports give you options for networks with compatible equipment.
  • COMPUTER BILD rated the tested model’s speed positively and noted slightly higher power consumption. This assessment applies to the model tested, not the NASync range as a whole.

TerraMaster

The F2-425 Plus is a more compact hard-drive option with two 5 GbE ports and additional M.2 slots.

  • COMPUTER BILD rated the speed of the F2-425 Plus positively in its test.
  • The test verdict applies to this model and cannot be taken as a general assessment of other TerraMaster products.

Joybuy products for CAD and RAW archives

This selection includes a NAS for growing CAD and RAW archives, with drive bays and network ports to factor into your plans.

Synology DiskStation DS1825+ 8-Bay NAS

Synology DiskStation DS1825+ 8-Bay NAS

Its eight drive bays give you room to grow if your CAD and RAW archive is expected to expand. You’ll still need to plan for a separate backup destination.

The product title lists two 2.5 GbE ports and an optional 10 GbE upgrade.

RAID is no substitute for a separate backup (BSI). Before editing CAD files directly from a share, test the workflow with your application. With Lightroom Classic, photos can be stored on a network drive, but catalogue files cannot (Adobe).

View at Joybuy

Frequently asked questions about NAS for CAD and RAW photos

Does RAID in a NAS already back up my CAD and RAW files?

No. The BSI explicitly distinguishes RAID mirroring from a backup: it does not reliably protect files that are overwritten at the same time or damaged by malware. Set up a separate backup and test the restore process.

Can I edit CAD drawings directly from a NAS?

It depends on your CAD application and network configuration. Autodesk documents cases in AutoCAD and Civil 3D where DWG files on network paths unexpectedly become read-only or cannot be saved. Test your intended workflow before moving active projects there.

Where should RAW photos and a Lightroom Classic catalogue be stored?

According to Adobe, if you use Lightroom Classic, photos can be stored on a network drive, but catalogue files cannot. Plan separate storage and backups for your photos and catalogue. This applies to Lightroom Classic and is not automatically true of every photo application.

What ongoing and additional costs should I budget for?

Check what’s included, which compatible drives you need and whether you’ll need a separate backup destination. Also factor in power consumption and possible drive replacements in future. The power consumption of one tested model does not predict that of your own configuration.

What data protection obligations apply in Germany when handling personal data?

If you process personal data as a controller or processor, Article 32 of the GDPR requires appropriate technical and organisational measures that reflect the level of risk. Germany’s Federal Commissioner for Data Protection and Freedom of Information (BfDI) explains, among other things, how to protect against unauthorised access and accidental loss. This does not mean there is a general requirement to use a particular NAS, or that one model alone will meet these requirements.