When choosing a NAS for large CAD project folders, start with how you use your CAD software and how much usable capacity you need, rather than focusing on network speed alone. For shared access, file locking and external references need to work with your specific software and shared folder setup; Autodesk does not certify NAS devices across the board for its products. You should also plan a separate backup and test how to restore it, as recommended by the German Federal Office for Information Security.
Who is a NAS for CAD projects suited to?
CAD team sharing a project folder
If several people need to access the same files, check that file locking and external references work with your CAD software and shared folder setup. Autodesk describes file locking as a function of the operating system or file access software.
Design practice with a growing project archive
For lots of related project files, usable capacity, expansion options and a separate, recoverable backup all matter. The German Federal Office for Information Security recommends planning and testing how to restore your data.
CAD users who regularly transfer large files
If large project folders regularly move between your workstation and NAS, it’s worth looking at the entire network path. A faster connection alone doesn’t tell you how quickly a particular CAD workflow will run.
Which buying criteria matter most for large CAD project folders?
First, work out whether you simply want to store projects in one central location or collaborate on them directly from the NAS. You can then plan capacity, backup and networking around the way you work.
| Consideration |
What to check before buying |
Who should pay particular attention? |
| CAD workflow and file locking |
Note down your CAD programme and version, then open and save a typical project folder with external references through the shared folder setup you plan to use. For AutoCAD, Autodesk describes possible issues with file locking and external references on NAS or SAN storage. |
If several people use the same files, I want to know whether locking and references will work with my workflow. Around 28% of consumers prioritise CAD compatibility and file locking. |
| Recoverability |
Plan for a separate backup destination and check that you can restore a complete project folder, including its dependencies. The German Federal Office for Information Security recommends a separate offline backup and a planned recovery process. |
For important project versions, I don’t want to rely on a single central copy if something goes wrong. Around 28% of consumers prioritise the recoverability of their project data. |
| Usable capacity and expansion |
Assess your current data and expected growth, then calculate the usable capacity for your planned drive and storage configuration. Also check drive compatibility and possible expansion options. |
If my project archive is growing, I want to plan suitable expansion options without treating raw capacity as usable storage. Around 22% of consumers put capacity and expansion first. |
| Speed when transferring large files |
Compare the NAS and workstation connections, as well as the entire network path. Test with a typical project folder rather than just one large file. |
If I regularly move large project folders, I want to know whether a faster network path would make a difference at my workstation. Around 22% of consumers prioritise transfer speed. |
Which mistakes should you avoid when buying a NAS?
-
Assuming 10 GbE means faster CAD editing
The connection alone doesn’t prove how quickly a complete project folder will open and save, or whether it’s suitable for collaborative editing.
Check the entire network path and test a typical project folder with your CAD software and the people who will be working on it.
An upgrade later on may require additional networking equipment; your workstation and the rest of the network path also need to be suitable for the setup.
-
Counting raw capacity as available storage
Usable capacity depends on your choice of drives and storage configuration. Synology notes that raw and usable capacity can differ.
Calculate the available storage for your planned drive setup and check compatibility before buying drives.
Depending on your expansion plans, you may need additional drives or a separately available expansion unit.
-
Confusing central NAS storage with an independent backup
A single central copy of your projects doesn’t give you a separate backup. For ransomware preparedness, the German Federal Office for Information Security recommends an offline backup that is disconnected after the backup is complete.
Decide how you would restore a complete CAD project folder, then test the recovery process.
Planning should include a separate backup destination and time for regular recovery tests.
Which NAS brands are worth considering?
Synology
The DiskStation DS925+ and DS1525+ are models with four and five internal drive bays respectively, designed for central project storage.
- Synology lists two built-in 2.5-GbE ports on both models. The DS1525+ can be upgraded to 10 GbE with a separately available module.
- Usable capacity depends on the drives and storage configuration. Connection specifications alone don’t prove suitability for a particular CAD workflow.
QNAP
The TS-464 is a four-bay option with built-in 2.5-GbE ports and a stated upgrade path to 10 GbE.
- QNAP lists two 2.5-GbE ports and the option to add 10 GbE with a PCIe network card.
- The manufacturer’s throughput figures apply to specific configurations and aren’t independent measurements of a CAD workflow.
UGREEN
The NASync DXP4800 Plus is a four-bay option that, according to UGREEN, includes a built-in 10-GbE connection.
- This connection may be worth considering if your local network has the necessary equipment.
- A 10-GbE port doesn’t demonstrate how quickly a particular project folder will transfer, or whether the device is suitable for direct CAD editing.
ASUSTOR
The LOCKERSTOR 4 Gen3 AS6804T is a four-bay model with several built-in network connections.
- ASUSTOR lists two 10-GbE ports, two 5-GbE ports and four M.2 slots for this model.
- The manufacturer’s transfer figures apply to optimised conditions. They don’t prove the speed you’ll get at your workstation or the device’s compatibility with CAD.
NAS models on Joybuy for expandable project storage
The models below are designed for storing large project folders centrally, with options to expand. Check file locking, CAD compatibility and the network path separately from the hardware specifications.
No image available
Synology DiskStation DS925+ 4-Bay NAS, Dual 2.5GbE
An option for central project storage if four internal drive bays and the potential to expand later are important to you.
Four drive bays and two built-in 2.5-GbE ports. According to Synology, you can expand to up to nine drives with a separately available unit. The product name also mentions M.2 NVMe SSD caching.
View on Joybuy
No image available
Synology DiskStation DS1825+ 8-Bay NAS, Dual 2.5GbE
An option if a larger project archive calls for eight internal drive bays and further expansion options.
Eight drive bays and two built-in 2.5-GbE ports. The product name lists 10 GbE as an optional upgrade and a capacity of up to 360 TB; actual usable capacity depends on the drives and storage configuration.
View on Joybuy
Frequently asked questions about NAS devices and CAD project folders
Can I collaborate on CAD files directly from any NAS?
No. The NAS hardware alone can’t guarantee that collaborative CAD editing will work. Autodesk doesn’t certify every NAS for its products, and describes possible issues with file locking and external references on NAS or SAN storage when using AutoCAD. Test your software with a typical project folder and the people who will be working on it.
How can I stop someone else overwriting the same version of a file?
For shared AutoCAD files, set up file locking and the appropriate user and shared folder permissions in your server or file access software. Autodesk describes file locking as a function of the operating system or file access software; test how it works on the workstations you plan to use.
Are mirroring or snapshots enough as my only backup?
For a separate recovery option, also plan a backup outside your live working data and test that you can restore it. For ransomware preparedness, the German Federal Office for Information Security recommends an offline backup that is disconnected after the backup is complete.
What additional equipment should I check before buying a NAS?
Check which drives, backup destinations and network components your setup requires. An expansion unit for the Synology DS925+ is sold separately; for the DS1525+, Synology lists a separately available 10-GbE module. QNAP also states that the hard drives and SSDs shown in its TS-464 example configuration are sold separately.