A NAS isn’t automatically the right place to work directly on CAD projects. Autodesk notes that access to Inventor files over network paths can be inconsistent, while SOLIDWORKS PDM uses a local vault view and file check-out. For mobile work, it may make sense to use a local working copy and sync it back after checking the changes. Whether this works depends on your CAD application and project files. Also plan for usable capacity and a separate backup: Germany’s Federal Office for Information Security does not consider RAID mirroring a backup.
Who is a NAS for CAD projects suitable for?
CAD designers who work on the go
If you work on the go, you may need a local working copy and a controlled sync. Whether all referenced files remain available depends on your CAD software and workflow. Synology documents configurable sync options for Drive Client.
Small CAD teams
If several people use project files, you’ll need clear rules for access rights and changes. A NAS share isn’t the same as a PDM vault: SOLIDWORKS describes local vault views and file check-out as features of PDM.
CAD project archives that need to be recoverable
If you need to retrieve older project versions or restore projects after a NAS failure, plan for versioning and a separate backup. Germany’s Federal Office for Information Security points out that RAID mirroring alone is no substitute for a backup.
What should you look for when buying?
First, decide whether you want to work locally, share files or archive projects. This will determine your sync setup, drive configuration and backup workflow.
| Requirement |
What to check before buying |
Who is this important to? |
| Working on the go |
Check whether project files and references are available locally, and how changes are synced. |
If I need to work on the go without a continuous connection, I need a complete local working copy. Around 25% of consumers are likely to prioritise a mobile CAD workflow above all else. |
| Recovery |
Plan for a separate backup destination and test restoring a complete project. |
If I need to get back to a usable project version after a fault or data loss, I should plan for a backup separate from the RAID mirror. Around 25% of consumers are likely to put this requirement first. |
| Team access |
Clarify the permissions you need and whether you need a CAD-specific PDM workflow. |
If several people edit files, I need clear rules about who can work on each file and which version is the current one. Around 20% of consumers are likely to prioritise managed team access. |
| Usable storage |
Compare your project library and expected growth with the capacity available after your planned drive configuration; check what’s included and compatibility. |
If I want to store a large collection of projects, I should check in advance which drives are compatible and how much storage will be usable in my chosen configuration. Around 20% of consumers are likely to prioritise capacity and drive choice. |
| Data transfer |
Check the entire network path and compare a typical task performed locally with one performed over the network. |
If I want to transfer project folders quickly, my workstation must also be compatible with the rest of the network. Around 10% of consumers are likely to place particular importance on transfer speeds across their existing network. |
Avoid common misconceptions
-
Relying on RAID mirroring as a complete backup
Mirrored data can still be overwritten or affected by malware. Germany’s Federal Office for Information Security explicitly distinguishes RAID from data backup.
Set up a separate backup destination and test whether you can restore a complete CAD project from it.
Make sure your plan includes a separate backup destination and time to test recovery.
-
Assuming a NAS enclosure comes with usable storage
The number of bays doesn’t tell you whether drives are included or how much storage will remain after you choose a configuration. For example, QNAP’s TS-264-8G is listed without an HDD.
Check what’s included, whether your exact drive models are compatible and how much usable capacity your planned configuration will provide.
You may need to buy compatible HDDs or SSDs separately.
-
Assuming every NAS sync setup manages CAD projects
Syncing files doesn’t automatically manage references or simultaneous changes. A simple shared folder isn’t the same as the check-out and management features of a CAD PDM workflow.
Test the complete project folder in your CAD application. If you need a managed vault, assess PDM separately.
-
Assuming 2.5GbE ports will directly make CAD work faster
A fast NAS connection alone doesn’t determine the speed of the entire transfer path or how a CAD application behaves. Autodesk also cites variable network performance and latency as potential factors for Inventor.
Compare typical tasks performed locally and over the network, and check the connections at every point along the network path.
You may need additional networking equipment if other parts of the transfer path don’t support the connection you want.
Key brands at a glance
Synology
NAS systems with Synology Drive for configurable syncing and file versions. The DS225+ is a two-bay example with a 2.5GbE port.
- Synology documents local sync folders and a version history.
- Drive compatibility depends, among other things, on the NAS series and DSM version. Stated sequential performance figures aren’t CAD benchmarks.
QNAP
NAS systems with Qsync; the TS-264-8G has two SATA bays and two 2.5GbE ports.
- QNAP documents syncing between a NAS and a computer.
- The TS-264-8G is supplied without an HDD. This doesn’t establish whether a Qsync setup is suitable for CAD references or collaborative editing.
ASUSTOR
The AS5402T is a two-bay NAS with four M.2 slots and two 2.5GbE ports.
- Its documented ports and slots offer room to expand.
- The hardware specifications don’t guarantee a particular level of CAD performance or mean you’ll need every connection for your needs.
TerraMaster
The F2-424 is a two-bay NAS with two 2.5GbE ports and two M.2 slots.
- TerraMaster lists SATA HDDs and SATA SSDs as compatible drive types.
- The right combination depends on the size of your project library and your planned backup workflow.
Western Digital
Red family drives are a potential option for a compatible NAS enclosure you’ve already chosen.
- The family includes drives that use CMR and SMR recording technologies.
- Western Digital lists both technologies, so check the exact drive model and its compatibility with your NAS.
NAS enclosures for central storage and archiving
These NAS enclosures are designed for central project storage and archiving. Check separately whether your specific CAD software supports working directly over the network as part of your workflow.
No image available
Synology DiskStation DS925+ 4-Bay NAS
For central storage if four drive bays and an expansion option suit your storage needs.
Four drive bays; two 2.5GbE ports; M.2 NVMe SSD caching; expandable to up to nine bays, according to the product name.
View at Joybuy
No image available
Synology DiskStation DS1825+ 8-Bay NAS
For larger central project libraries, if eight drive bays suit your storage plans.
Eight drive bays; two 2.5GbE ports; optional 10GbE; up to 360 TB, as stated in the product name.
View at Joybuy
No image available
Synology DS225+ 2-Bay NAS, diskless
For compact central storage if two bays are enough and you plan to buy compatible drives separately.
Two drive bays; Intel Celeron J4125 Quad-Core; 2 GB DDR4 RAM, expandable to 6 GB; 2.5GbE and Gigabit LAN; RAID 0, RAID 1 or JBOD. The enclosure is supplied without drives.
View at Joybuy
Frequently asked questions about NAS and CAD
Can I edit a CAD project directly from a NAS share?
It isn’t a blanket recommendation for every CAD application. Autodesk describes potential performance fluctuations when using Inventor over network paths; SOLIDWORKS PDM uses a local vault view with file check-out. Check the complete workflow for your software and referenced files.
How do I prepare for CAD work on the go?
Decide in advance which project files need to be available locally, then test syncing when you reconnect to the network. Synology Drive Client offers options for folders, filters and sync direction. Test with a complete project to check that references and changes are handled as expected.
Are RAID and file versions enough for a backup?
No. Germany’s Federal Office for Information Security distinguishes RAID mirroring from data backup. Plan for a separate backup and test whether you can restore a complete project from it.
Are there specific data protection obligations for CAD files on a NAS in Germany?
If a project involves processing personal data and the GDPR applies to that processing, controllers and processors must implement appropriate technical and organisational measures. This doesn’t mean there’s a blanket requirement to use a particular NAS model or RAID level; what matters is the specific processing and the associated risk.