For recording music on a small desk, start by planning for the space available, the usable capacity you need and a separate backup. A two-bay NAS may suit a modest archive; more bays or a faster network connection matter most if your archive is growing or your entire network path can support higher transfer rates. The BSI points out that drive mirroring alone does not replace a backup, and a manufacturer’s noise rating is no guarantee of a quiet recording environment.
Who is a NAS suitable for?
Music makers with important takes
If you want to restore recordings and complete project folders after a fault or accidental deletion, plan for a separate backup. The German Federal Office for Information Security (BSI) points out that mirroring alone does not replace a backup.
Recording in a cramped workspace
The enclosure, cables and airflow all need to fit in the space you have. Also take possible fan and drive noise into account while recording: manufacturer figures apply only to the stated measurement conditions.
People with a growing project archive
If you regularly save sessions and audio files, plan usable capacity, drive configuration and access from multiple devices together. The nominal capacity of the drives does not automatically equal the file storage available to you.
What should you look for when buying?
Start with the space available where you record and the capacity you need. Then plan for backup, file access and network connectivity to suit your workflow.
| Consideration |
What to check before buying |
Who is it important to? |
| Restoring recordings |
Check whether complete project folders can be backed up to a separate destination and restored from it as a test. |
If my takes matter, I want to be able to restore a separate copy. Around 33% of consumers put restoration first. |
| Space and noise |
Measure the footprint, including cables and clearance for airflow; assess noise with the intended drives in the planned location. |
With limited recording space, I want to take the enclosure and potential operating noise into account. Around 27% of consumers focus mainly on footprint and noise. |
| Usable capacity |
Estimate the size of complete sessions and expected growth; then check the usable capacity of the specific drive configuration. |
If my project archive is growing, I want room for both existing and future sessions. Around 20% of consumers prioritise capacity and growth. |
| Access to projects |
Check the sharing options for your computers and whether your DAW includes all the project files and assets you need. |
If I want to open projects on multiple devices, I need a central storage location with all the files. Around 13% of consumers prioritise shared access. |
| Transferring large sessions |
Compare the NAS connection with your computer and network devices; assess the workflow using a representative project folder. |
If I regularly transfer large sessions, I want to choose the right components for the entire network path. Around 7% of consumers prioritise transfer speed. |
Common misconceptions
-
Mirrored drives are two independent backups
Changes such as accidental deletion or overwriting can affect both mirrored drives. The BSI recommends not treating mirroring as a replacement for a backup.
Plan a copy of your complete sessions that is separate from the NAS, and test whether you can restore files from it.
Allow extra time for regular restoration tests.
-
A copied project folder automatically includes all audio files
Logic Pro projects may reference external audio files or other assets stored outside the project folder. Apple points out that simply copying or moving the folder does not automatically transfer these files.
Open a test copy of a session and check that all the files you need are available.
Gathering and transferring missing assets can take extra time.
-
Port speed or an idle noise rating reflects recording conditions
A faster NAS connection alone does not determine transfer speed: your computer and network devices also need to support the full transfer path. A hard drive noise rating measured at idle does not automatically describe how it sounds during a recording.
Check the entire network path and assess noise with the intended drives in their actual location.
-
Enclosure size and number of bays tell you everything about the finished storage solution
The number of bays does not tell you whether drives are included or how much storage will be usable with your chosen setup.
Check what’s included, drive compatibility and the usable capacity of the specific configuration.
Key brands at a glance
Synology
The DS223j is a two-bay option for central file storage and access across multiple devices.
- Synology lists two drive bays and file and backup features for the DS223j.
- For the specific version, check the footprint, usable capacity and whether drives are included; the features alone tell you nothing about noise in your recording space.
QNAP
The TS-233 is a two-bay model for a smaller archive; the TS-264-8G is a separate model for different performance needs.
- QNAP lists two drive bays and a Gigabit port for the TS-233.
- TS-233 specifications do not automatically apply to the TS-264-8G. Check the model, connections and footprint separately.
ASUSTOR
The Drivestor 2 AS1102T is a two-bay model whose footprint and connection can be checked against your available space and network setup.
- ASUSTOR lists a 2.5 Gigabit port and dimensions of 165 × 102 × 218 mm for the AS1102T.
- The manufacturer’s 18.6 dB figure applies to hard drives at idle and does not guarantee silent operation while recording.
TerraMaster
The F2-425 and F2-425 Plus are separate two-bay models that can be compared, among other things, by the transfer speed you need.
- In COMPUTER BILD’s German NAS test on 5 September 2026, both models were rated as fast.
- The test also notes higher power consumption. This assessment applies to the models tested, not every TerraMaster NAS.
UGREEN
The NASync DH2300 is a two-bay option for straightforward storage; the DXP4800 Plus is designed for different space and performance needs.
- In COMPUTER BILD’s German NAS test, the DH2300 model tested was rated as quiet and energy-efficient.
- The test found it slow with small files. This verdict applies to the model tested and may not apply to every drive configuration.
Joybuy products
These Joybuy models range from a two-bay NAS to enclosures with four or eight bays. Compare their dimensions and your planned drive configuration with the space you have and the size of your archive.
No image available
Synology DiskStation DS925+ 4-Bay NAS
This model may suit a growing archive if four bays and the stated expansion option meet your planned needs.
Four drive bays; expansion to up to nine bays stated; Dual 2.5GbE; M.2 NVMe SSD caching. According to the product listing, the enclosure measures 29 × 26 × 24 cm. Synology-branded drives are listed as compatible in the product description; check drive compatibility for your specific configuration.
Joybuy
No image available
Synology DS225+ 2-Bay NAS, Diskless Desktop Enclosure
This model is an option for central storage with two bays if you plan to buy drives separately and the enclosure fits on your desk.
Two drive bays; RAID 0/1/JBOD; 2.5GbE and Gigabit Ethernet; Intel Celeron J4125; 2 GB DDR4 RAM, expandable to 6 GB. The stated dimensions are 23.22 × 10.80 × 16.50 cm. The enclosure is listed as diskless, so you’ll need to provide the drives. A RAID configuration does not replace a separate backup.
Joybuy
No image available
Synology DiskStation DS1825+ 8-Bay NAS
This model may suit a large or growing archive if you have enough room; if you’re working with a small desk, check the enclosure dimensions particularly carefully.
Eight drive bays; Dual 2.5GbE; optional 10GbE. According to the product listing, the enclosure measures 45 × 36 × 30 cm, so you’ll need to allow plenty of space.
Joybuy
Frequently asked questions
Is RAID 1 enough to back up my recordings?
No, mirroring does not replace a separate backup. Changes such as accidental overwriting can affect both drives, so the BSI recommends keeping a separate backup and checking that you can restore files from it.
Can I simply copy a Logic Pro project folder to the NAS?
First check whether the project references external audio files or other assets. Apple points out that simply copying the project folder will not automatically copy these files, so open a test session after transferring it and check that the files you need are there.
What should I bear in mind when setting up a NAS on my desk?
Compare the dimensions of the specific model with the space available, and allow for cables and airflow. Also check drive compatibility and the entire network path; a noise rating for hard drives at idle does not automatically describe how they sound while recording.
Does a manufacturer’s warranty replace my statutory rights if a product is faulty?
No, a manufacturer’s warranty is separate from your statutory rights against the seller. For consumer purchases in Germany, the Verbraucherzentrale generally states a two-year period for new goods; also check the product listing to see whether drives are included.