What should you look for?
Synology recommends considering the power consumption of connected devices and the available runtime. When choosing a UPS, you’ll also need to check whether it’s recognised by your exact NAS model and how the devices will fit into your room.
| What matters |
What to check before buying |
Who will find this especially important? |
| Automatic NAS response |
Compatibility with your exact NAS model, USB communication rather than a charging port alone, and a tested shutdown process. |
If I want to avoid data loss caused by an abrupt shutdown, the UPS and NAS need to communicate properly. Around 33% of consumers are likely to make automatic NAS response their top buying priority. |
| Runtime for NAS and router |
The power consumption in watts of all battery-backed devices, the UPS wattage limit and its runtime curve under the combined load. |
If I also want my router to stay powered during a power cut, I need to consider both devices together and check the available runtime for that load. Around 27% of consumers are likely to prioritise combined runtime. |
| Space and operation in your room |
Dimensions and placement guidance, as well as model-specific information on noise and alarm settings. |
If the UPS is going near my bed or desk, I want to know in advance whether it will fit and what operating or alarm noises to expect. Around 20% of consumers are likely to prioritise how suitable it is for a room. |
| Battery replacement and running costs |
Whether the battery can be replaced and the manufacturer’s instructions for the exact model number; calculate electricity costs only using reliable information for the relevant operating conditions. |
If I want to use the UPS for longer, I need to find out whether its battery can be replaced according to the manufacturer’s instructions and what the running costs will be for my use. Around 20% of consumers are likely to rank battery replacement and ongoing costs as their main concern. |
Suitable products on Joybuy
Related products will be available soon.
Frequently asked questions
Is a USB port on the UPS enough for automatic shutdown?
No. A USB charging port and a USB interface for transmitting status information serve different purposes. Check the exact UPS against the NAS manufacturer’s compatibility list, connect the communication interface and test the configured process. Synology notes that the UPS shutdown function varies by brand and model.
How do I calculate the runtime I need for my NAS and router?
Add up the power consumption of the devices you plan to connect to battery-backed outlets and compare the total with the UPS’s wattage limit. Then check the manufacturer’s runtime curve for that combined load and the time needed to shut down. The VA rating alone doesn’t tell you the runtime.
How do I test whether the UPS works with my NAS?
Configure the NAS’s response to the UPS and set a delay that suits the available runtime, then test the process according to the NAS manufacturer’s instructions. For the systems described, QNAP recommends disconnecting the UPS from mains power and checking that the NAS detects battery operation and responds after the set delay. The steps may vary by brand.
What should I check about battery replacement and running costs?
Check the exact model number to see whether the battery can be replaced according to the manufacturer’s instructions and what information is available about a suitable replacement battery. To calculate electricity costs, you’ll need a reliable figure for power consumption under the relevant operating conditions and your electricity tariff.
What does the CE mark mean on a 230 V UPS in Germany?
The relevant EU Low Voltage rules apply to electrical equipment with a rated voltage between 50 and 1,000 V AC. By applying the CE mark, the manufacturer declares that the product complies with the requirements. The German Federal Network Agency notes that it is not an independent quality mark and doesn’t confirm compatibility with your NAS. Check the marking and documentation for the specific product listing.