CAD project teams
When several people need to access assemblies and project files, the group needs clear responsibilities for making changes. Autodesk Support notes that Inventor users need to coordinate manually when using basic network shares.
A NAS makes sense for your school CAD project if several authorised computers need shared storage and your CAD software supports this workflow. For occasionally backing up a single computer, an external hard drive is usually simpler. Autodesk Support points out that, with a basic Inventor network share, users need to coordinate file access themselves, while Fusion files are normally stored in the cloud. You should also plan a separate backup: Germany’s Federal Office for Information Security does not consider RAID mirroring to be a backup.
When several people need to access assemblies and project files, the group needs clear responsibilities for making changes. Autodesk Support notes that Inventor users need to coordinate manually when using basic network shares.
If you need to retrieve older work or files that have been deleted by mistake, plan for recovery and a separate backup. Germany’s Federal Office for Information Security explicitly distinguishes data backups from RAID mirroring.
If you usually work alone and mainly need an occasional extra copy of your files, consider whether an external hard drive would do the job more simply. PC-WELT treats network storage as a separate category of device; the right solution depends on whether you actually need shared storage.
First, work out whether several people need to access files together or whether you simply need a backup. Then consider how your CAD software stores files, whether you have a separate backup and what equipment your network needs.
| What you need | What to look for | Who it matters to |
|---|---|---|
| Recovering files | Check the backup destination and schedule, whether older versions are available, and whether you can test restoring a file. | If I need to retrieve an older design after a mistake, a separate, tested backup is essential. Around 36% of consumers put recovery first. |
| Sharing access to files | Check user accounts and folder permissions, and whether your CAD software supports the planned network storage. According to Autodesk Support, users need to coordinate access to files themselves when using a basic Inventor share. | If several people are working on assemblies, I want to manage access and coordinate changes rather than mistake a shared folder for project management. Around 29% of consumers prioritise shared file access. |
| CAD workflow and network | Compare the NAS and computer connections with the rest of your network, and test a typical project folder. Autodesk describes Fusion as a cloud storage workflow, so a NAS is not automatically the direct project storage location. | If I need to open and save large or linked files in the CAD software I plan to use, the storage workflow matters just as much as the connection. Around 21% of consumers prioritise CAD compatibility and transfer speeds. |
| Total cost and usable storage | Check whether drives are included, how much storage will be usable and what additional backup destination you’ll need. Raw capacity is not the same as usable storage. | If I only need an occasional extra copy, I want to weigh up the enclosure, drives and backup effort against an external hard drive. Around 14% of consumers prioritise total cost and usable storage. |
With mirroring, changes are written to both drives at the same time. Germany’s Federal Office for Information Security therefore does not consider RAID mirroring to be a backup.
Plan a separate backup of your CAD files and test whether you can restore a file from it.
You’ll also need a separate backup medium and time to test file recovery.
According to Autodesk Support, users need to coordinate access to individual files themselves when using a basic Inventor network share. Different local paths can also mean linked components are missing when opened on another computer.
Agree on a shared workflow and consistent project paths before moving assemblies. Check whether your team also needs CAD project management software.
Coordinating file access and, if needed, setting up additional project management software can take time.
A diskless NAS enclosure does not necessarily include drives. The drive configuration and separate backup affect how much storage is actually available for your project.
Compare offers based on the enclosure, included drives, usable capacity and backup plan.
With a diskless enclosure, you’ll need to add suitable drives. You’ll also need to plan an additional destination for a separate backup.
A faster NAS connection does not guarantee the same transfer speed between your computer and the NAS. According to Autodesk, working with Inventor files over a server also depends on the connection used by the computers involved.
Check the entire network connection and test a typical project folder before deciding on the equipment you need.
You may need additional network equipment, but it won’t speed up your workflow if other connections are the bottleneck.
The DiskStation DS223j is an example of a NAS for shared file storage and backing up PC folders in small teams.
The TS-264 is an option for a network where other devices can make use of faster connections.
The F2-425 is a two-bay diskless enclosure that you can compare with other 2.5-GbE NAS models.
The Drivestor 2 AS1102T is a two-bay option with 2.5-GbE for a suitably equipped network.
The NASync DXP2800 is another two-bay option to compare for its connections and separately purchased drives.
This selection includes NAS models for centralised file storage with shared access and different numbers of drive bays.
No image available
The four drive bays give you an option for centralised file storage. Check that your network supports the connections.
Four drive bays, expandable to nine; two 2.5-GbE ports; M.2 NVMe SSD cache.
According to the product description, only Synology drives are compatible.
No image available
The eight drive bays are an option if you’re planning centralised storage with multiple drives. The final configuration depends on the drives you add.
Eight drive bays; two 2.5-GbE ports; optional 10GbE; stated capacity of up to 360 TB.
No image available
This two-bay NAS can provide centralised storage if you choose and add the drives you need separately.
Intel Celeron J4125 quad-core; 2 GB DDR4 RAM, expandable to 6 GB; 2.5-GbE and Gigabit LAN; USB-A 3.0; RAID 0/1/JBOD.
The diskless enclosure is supplied without drives; you’ll need to add compatible drives.
Not without an agreed workflow. Autodesk Support explains that, with a basic network share, users need to coordinate access to individual Inventor files themselves. Vault offers separate management with check-in and check-out.
No. According to Autodesk, files saved in Fusion are normally stored in the cloud. Check the intended export or backup process rather than planning to use a NAS as a direct replacement for Fusion project storage.
No. Germany’s Federal Office for Information Security distinguishes RAID mirroring from a data backup because mirrored data can be changed at the same time, and mirroring does not protect against accidental overwriting or malware.
If project folders contain personal data about pupils or teachers and the school is responsible for organising how it is processed, discuss data protection and access rights with the school. Germany’s Data Protection Conference addresses its guidance on online learning platforms to schools; this does not amount to blanket approval or a blanket ban on using a private NAS for this CAD project.
No. Consumer advice centres distinguish statutory rights against the seller from a voluntary manufacturer’s guarantee. Check the relevant terms and, for a diskless enclosure, also check which drives you’ll need to add.