Who is a NAS for music projects suited to?

Musicians with a growing project archive

As your sessions, recordings and exports accumulate, plan for the usable storage capacity of your chosen drive configuration and any future expansion you might need. Synology and QNAP point out that usable storage depends on the drives and configuration.

Musicians with irreplaceable recordings

If you want to restore complete projects after a drive failure, accidental deletion or file corruption, make sure you have a backup that’s separate from your NAS. Germany’s Federal Office for Information Security distinguishes between data mirroring and an independent backup.

Musicians who hand over projects

When you switch computers or hand over a session, make sure the project folder also contains the audio files it references. Ableton and Steinberg explain how to collect or archive the required project files using their respective features.

What should you look for when buying?

Don’t just compare the number of bays. Consider usable capacity, recovery options and how you plan to work with active sessions.

What you need What to check before buying Who is it important for?
Usable storage and room to grow Calculate your current storage needs and expected growth; check drive compatibility and the usable capacity of your chosen configuration. As my project archive grows, I want to make sure there’s enough room for sessions, recordings and additional versions. Around 25% of consumers prioritise storage space and room to grow.
Recovery after data loss Choose an independent backup destination and schedule; test restoring a complete sample project. Germany’s Federal Office for Information Security points out that mirroring is no substitute for an independent backup. If my recordings must not be lost, I need a separate copy that I can actually use to restore a project. Around 25% of consumers prioritise recoverability.
Complete projects and handover Check how your DAW collects referenced audio files into a standalone project folder; open the copy on a second device. When I switch computers or hand over a session, I want to take the required audio files with me, not just the project file. Around 20% of consumers pay particular attention to complete project folders and a smooth handover.
Transfers across your own network Check the NAS and computer ports alongside the entire network path; test the process with a typical project folder. When I regularly transfer large project folders, I want to know whether my entire network is compatible with the ports I plan to use. Around 15% of consumers prioritise transfers across their own network.
Cost of a ready-to-use solution Consider what’s included, suitable drives, planned usable storage and a separate backup destination together. When planning a complete storage solution, I want to factor in the drives and an independent backup as well as the enclosure. Around 15% of consumers prioritise the overall cost of a ready-to-use solution.

Common assumptions when buying a NAS

  • Assuming RAID mirroring is a complete backup

    Mirroring also copies unwanted changes or deletions. That’s why Germany’s Federal Office for Information Security does not consider RAID mirroring an independent backup.

    Keep an independent copy of your complete projects and test whether you can restore a session from it.

    Allow for a separate backup destination and time to run occasional restore tests.

  • Archiving only the session file, not the complete project

    A session may reference audio files stored elsewhere. Ableton also points out that plug-ins aren’t copied into the project folder.

    Use your DAW’s collect or archive feature, then open the transferred copy on the destination device to check it.

  • Assuming the enclosure and raw capacity make a complete solution

    A NAS enclosure may be sold without hard drives, and usable storage depends on the drives and configuration. QNAP states that the TS-264-8G is supplied without HDDs.

    Compare what’s included, compatible drives and the usable capacity of your planned configuration, rather than looking at the enclosure’s stated capacity alone.

    Depending on the configuration, you may also need suitable hard drives and an independent backup destination.

  • Assuming a fast port guarantees DAW performance

    A port’s stated speed alone doesn’t tell you how a particular session will perform over your network.

    Check the network path from the NAS to your computer and try out your planned workflow with a typical project.

    Expanding your network may require additional equipment, so only plan for it if it’s compatible with your existing setup.

NAS brands at a glance

Synology

The DiskStation DS225+ is a two-bay option for centralised file storage.

  • Synology describes backup and synchronisation features for the DiskStation DS225+.
  • Usable capacity and drive compatibility depend on the specific configuration; a 2.5GbE specification alone doesn’t prove how a DAW session will perform.

QNAP

The TS-264-8G has two drive bays, while the TS-464 is a four-bay model.

  • QNAP lists two 2.5GbE ports for the TS-264-8G.
  • According to QNAP, the TS-264-8G is supplied without HDDs. An optional network upgrade is not the same as having a 10GbE connection already in place.

TerraMaster

The F2-425 is a two-bay option.

  • COMPUTER BILD rated the model it tested as fast and easy to set up.
  • COMPUTER BILD noted that the tested model had high power consumption. The test result doesn’t replace checking your own drive configuration and music workflow.

ASUSTOR

The range includes NAS models with two or four drive bays.

  • ASUSTOR’s example is the LOCKERSTOR 4 Gen2, with four bays and two 2.5GbE ports.
  • The number of bays and ports alone doesn’t prove the usable capacity of a configuration or its performance with music projects.

UGREEN

The NASync DXP4800 Plus is a four-bay option.

  • According to UGREEN, it has one 2.5GbE port and one 10GbE port.
  • COMPUTER BILD noted that the tested model was more expensive and had slightly higher power consumption. Its port specifications don’t prove how a DAW session will perform.

Joybuy products for growing music projects

These models include NAS devices with two or more drive bays for centralised storage and growing project archives.

Synology DiskStation DS925+ NAS with four drive bays

Synology DiskStation DS925+

An option for a growing archive if you want to plan for more internal drive choices.

Four drive bays, two 2.5GbE ports, expansion to up to nine bays and M.2 NVMe SSD caching. Stated drive compatibility is limited to Synology drives.

View at Joybuy
Synology DiskStation DS1825+ NAS with eight drive bays

Synology DiskStation DS1825+

An option if your project archive needs plenty of internal drive bays.

Eight drive bays, two integrated 2.5GbE ports and an optional 10GbE upgrade.

View at Joybuy
Synology DS225+ NAS enclosure with two drive bays

Synology DS225+

A compact two-bay option if its calculated usable capacity is enough for your current archive and expected growth.

Two drive bays, 2.5GbE and Gigabit LAN ports, plus RAID 0, RAID 1 and JBOD. The enclosure is sold without drives.

View at Joybuy

Frequently asked questions about NAS and music projects

Is RAID 1 enough to back up my recordings?

No. Mirroring copies changes at the same time, so it doesn’t protect you from accidental overwrites or harmful changes in the way a separate backup does. Keep an independently stored copy and test restoring a complete project folder. Germany’s Federal Office for Information Security distinguishes RAID mirroring from data backup.

How do I transfer a complete Ableton Live or Cubase session?

Use your DAW’s collect or archive feature, then check the copy on the destination device. In Ableton Live, ‘Collect All and Save’ copies the audio files you’ve used into the project folder, but not plug-ins. For Cubase Pro 15, Steinberg describes ‘Prepare Archive’ for checking referenced clips and ‘Back up Project’ for creating a project folder with the required data.

Can I record and mix directly from a NAS?

There’s no one-size-fits-all answer for every DAW and network. Check the guidance for your specific DAW version and test the connection with a typical session. If you’re still unsure how it will perform, a cautious approach is to work from a local drive and archive your project to the NAS afterwards.

How many drive bays should my NAS have?

Two bays may be enough if the usable capacity of your planned drives will cover your archive and its expected growth. Four or more bays offer additional internal configuration options, but don’t guarantee a particular usable capacity or faster DAW performance.

What data protection obligations apply to a NAS containing music projects?

It’s relevant whether you process personal data, such as customer information in a professional context. Germany’s Federal Commissioner for Data Protection and Freedom of Information describes the scope of the GDPR for processing personal data. You’ll need to check whether it applies to your specific situation.