Studios with a growing capture archive
If you keep raw recordings and older project versions in one place, plan around the usable capacity of your chosen drives and RAID configuration, not just their raw capacity.
When choosing a NAS for a shared studio archive, start with usable capacity, expected growth and the cost of the drives. If several editing workstations need to access large files at the same time, consider the entire network path. You should also plan separate backups and suitable access permissions for important recordings.
If you keep raw recordings and older project versions in one place, plan around the usable capacity of your chosen drives and RAID configuration, not just their raw capacity.
If several computers access large video files at the same time, make sure the NAS connections, network equipment and workstation specifications are all compatible.
If a recording would be difficult or impossible to recreate, plan for a separate backup alongside your shared storage, and test that you can restore files from it.
A good fit if: Your recorded data and expected growth will fit within the usable capacity of your planned drive configuration, and not too many workstations need to transfer large files at once.
Trade-off: Fewer internal bays limit your options for adding drives later. A fast NAS connection is no substitute for compatible client devices or a separate backup.
A good fit if: You want to keep several years of recordings, raw files and project versions together in one shared archive.
Trade-off: Four bays give you more options for installing drives, but they don’t determine usable storage capacity on their own. Drive sizes and RAID configuration matter too.
A good fit if: Your specific multi-workstation workflow needs a faster network connection, and your computers and other network equipment are set up to support it.
Trade-off: A port specification isn’t a measured transfer rate for your studio. Additional network equipment can increase the overall cost.
| Priority | What to check when buying | Who it matters most to |
|---|---|---|
| Usable capacity and growth | Check your existing data and expected growth; work out the usable capacity for compatible drives and your planned RAID configuration. | If you want to keep raw recordings, exports and older project versions together, plan around the storage that will actually be available. Around 26 % of consumers say archive growth is their main priority. |
| Simultaneous transfers of large video files | Compare the connections on your NAS, switch and computers, as well as your multi-workstation workflow. Don’t treat port specifications as guaranteed transfer rates. | If several editing workstations need to transfer files at once, you’ll want to know whether the entire network path can handle it. Around 26 % of consumers prioritise simultaneous transfers. |
| Restoring files after loss or accidental changes | Plan for a separate backup destination, a backup routine and a restore test. Use snapshots as an additional measure only if your configuration supports them. | If recordings would be difficult to recreate, you’ll want to be sure they can be restored. Around 21 % of consumers say recovery is their main priority. |
| Access to shared and confidential folders | Check how your chosen system manages user accounts and shared folders. If you store personal data, decide on appropriate protection measures for your specific use. | If you don’t want every team member to see or edit the same project files, you’ll need suitable folder permissions. Around 16 % of consumers prioritise separate access permissions. |
| Overall cost of a ready-to-use system | Check what’s included with each offer and which drives are compatible. Only plan for a backup destination and faster network equipment if you need them. | If you’re planning a complete system rather than just an enclosure, you’ll want to include drives and backups in your budget. Around 11 % of consumers say overall cost is their main priority. |
With mirroring, changes are applied to both drives at the same time. That’s why the German Federal Office for Information Security (BSI) doesn’t consider RAID mirroring a standalone data backup.
Keep a separate copy of important raw recordings, and test that you can restore files from it.
Synology points out that usable storage depends on the drives and RAID configuration.
Calculate capacity based on your planned drive setup, and consider how your recording and project archive is likely to grow.
The connection on the NAS alone doesn’t tell you what transfer rate your studio network can achieve as a whole.
Before choosing a model, check which computers will be transferring which files at the same time, and what connections the rest of your network can support.
Some models don’t include hard drives. A NAS enclosure on its own doesn’t automatically provide usable shared storage or a separate backup.
Check what’s included with the specific offer, and plan for compatible drives and a separate backup destination.
The DS925+ is a four-bay NAS with two built-in 2.5-GbE ports.
The TS-264-8G and TS-464-8G offer two and four drive bays respectively for shared file storage.
The F2-425 and F2-425 Plus are two-bay models with different network connections.
The NASync DXP4800 Plus is a four-bay model with one 10-GbE port and one 2.5-GbE port.
The AS5404T is a four-bay model with two 2.5-GbE ports.
It depends on how much data you have, how quickly it’s likely to grow, your drive and RAID configuration, and how many people need to access files at once. Compare the resulting usable capacity and the network path. Four bays give you more options for installing drives, but not every studio needs them.
Keep a separate copy in addition to the one on your NAS, and check that you can restore files from it. The BSI doesn’t consider RAID mirroring a standalone data backup. Snapshots can give you access to earlier versions, but they need to be set up correctly.
First, check whether hard drives are included: QNAP lists the TS-264-8G and UGREEN lists the NASync DXP4800 Plus without HDDs. You should also plan for a separate backup destination, and add network equipment only if your workflow needs it.
If your recordings contain personal data, appropriate technical and organisational safeguards are important. The Federal Commissioner for Data Protection and Freedom of Information describes protecting personal data from loss or damage. The right measures depend on the content of your recordings and how you use them.
No. Owning a NAS doesn’t automatically give you permission to publish recordings. The German Copyright Act, overseen by the Federal Ministry of Justice and the Federal Office of Justice, is relevant when assessing rights to protected content. You’ll need to check the game content, music and any people featured in each recording separately.