For a predictable design archive, a NAS with two drive bays may be sufficient. If you expect to add lots of large design files and versions, or need more internal drive bays, a four-bay model gives you more room to expand. The German Federal Office for Information Security (BSI) distinguishes RAID mirroring from data backup. So, whatever the number of bays, plan for a separate backup and a tested recovery process.
Who is this NAS solution for?
People responsible for recoverable design files
If you need to recover design files after they’ve been accidentally deleted or overwritten, plan for a backup separate from the active NAS and a tried-and-tested recovery process. The BSI notes that mirroring is no substitute for a backup.
Teams with a growing design archive
As new projects and file versions are added, the usable storage capacity of your specific drive and RAID configuration matters. Synology notes that usable capacity depends on the drives and configuration you choose.
People managing a shared workstation
If you’re responsible for deciding who can view or edit design files, plan accounts and permissions for both active and completed project folders. The BSI describes network drives as a way to assign access rights on a need-to-know basis.
What should you consider when choosing?
NAS with two drive bays
A good fit if: two drives provide enough planned usable capacity for your current design files and the versions you expect to add.
Trade-off: There’s less room to expand internally. With mirroring, the combined capacity of both drives isn’t available for file storage.
NAS with four drive bays
A good fit if: your archive is likely to grow, or your planned drive configuration needs more than two internal bays.
Trade-off: More bays don’t automatically mean more usable storage, and they’re no substitute for a separate backup.
| What matters |
What to look for when buying |
Who it matters to most |
| Recoverable backups |
Plan for a separate backup destination, what you need to back up and a recovery process that you’ve tested in practice. |
If I need to recover design files after deletion or accidental changes, I need a separate copy. Around 31% of consumers put recoverability first. |
| Usable storage and room to grow |
Compare your current files and expected versions with drive capacities, the RAID configuration and available bays. |
As new projects and versions are added, I want to plan for the space I can actually use, not just the raw capacity. Around 25% of consumers prioritise archive capacity and room to grow. |
| Access on a shared workstation |
Set up accounts and read and write permissions for active and completed project folders. |
If several people use the files but completed designs shouldn’t be changed without permission, I need the right folder access settings. Around 25% of consumers prioritise access control. |
| Transferring large files |
Check the connections on the NAS, workstation and network equipment together. Treat manufacturers’ figures as applying only to the stated test conditions. |
If I often move large project folders, the entire network path matters, not just the NAS connection. Around 19% of consumers pay particular attention to transfer speeds for large files. |
Common buying mistakes
-
Relying on mirroring as your only archive backup
Mirroring also replicates changes and deletions. That’s why the BSI doesn’t consider RAID mirroring a data backup.
Before you buy, decide where you’ll keep a backup independently of the active NAS and how you’ll recover a design file.
A separate backup destination and regular recovery tests require extra storage and ongoing maintenance.
-
Assuming raw capacity or the number of bays equals usable storage
Usable capacity depends on the drives and RAID configuration. Extra bays, by themselves, aren’t a backup.
Work out how much data you have and how much you expect it to grow, then compare specific drive configurations.
Depending on the amount of usable storage you need, you may have to buy additional compatible drives.
-
Looking only at the NAS connection when considering transfer speeds
A fast connection on the NAS alone doesn’t determine how quickly files transfer to a shared workstation. Manufacturers’ figures are based on specific test setups.
Check the entire network path between the NAS, network equipment and workstation before making a faster connection the deciding factor.
A faster network path may require changes to your computer’s connection, switch or cabling.
-
Relying on outdated information about Synology drive compatibility
Synology’s FAQ from May 2026 says that DiskStation Plus models from 2025 onwards running DSM 7.3 can also use certain unlisted HDDs and 2.5-inch SATA SSDs in storage pools. Manufacturer support is limited for unlisted drives.
Check the compatibility information for your specific NAS model, firmware version and intended drive type.
Key NAS brands at a glance
Synology
The DS225+ is an example of a two-bay NAS, while the DS925+ is a four-bay model.
- According to Synology, the DS225+ has one 2.5-GbE port and one 1-GbE port; the DS925+ has four internal drive bays.
- Synology says DSM 7.3 allows certain unlisted HDDs and 2.5-inch SATA SSDs to be used in storage pools on DiskStation Plus models from 2025 onwards. Support is limited for unlisted drives, so check the model and firmware version.
QNAP
The TS-264-8G is a two-bay option for buyers who want to choose their own drives and specifications.
- QNAP lists two 3.5-inch SATA bays, two M.2 slots and two 2.5-GbE ports for the TS-264.
- QNAP says the enclosure is supplied without HDDs. You’ll need to factor in drives and a separate backup destination.
ASUSTOR
The Nimbustor 4 Gen2 AS5404T is an example of a four-bay NAS.
- ASUSTOR lists four drive bays, four M.2 slots and two 2.5-GbE ports for this model.
- ASUSTOR’s published throughput figures come from optimised lab tests and don’t show the transfer speeds you’ll get with your own design workflow.
TerraMaster
The F4-424 is another four-bay option for a growing project archive.
- TerraMaster lists four bays, 8 GB DDR5, two M.2 slots and several RAID options.
- The manufacturer’s transfer test uses four 18-TB HDDs in RAID 0. It doesn’t demonstrate the speed of other configurations or provide an independent data backup.
Two- or four-bay NAS enclosures
This Joybuy selection includes two- and four-bay NAS enclosures for a shared design archive.
No image available
Synology DiskStation DS925+ NAS enclosure, 4 bays
For a growing design archive that needs four internal drive bays.
Four drive bays; expansion to up to nine bays is specified.
Two 2.5-GbE ports and M.2 NVMe SSD caching are specified.
Usable capacity depends on the drives and configuration; a separate backup is still required.
Joybuy
No image available
Synology DS225+ NAS enclosure, 2 bays, drives not included
For a predictable archive where two internal drive bays provide enough usable storage.
Two drive bays; 2.5-GbE and Gigabit LAN connections are specified.
2 GB DDR4 RAM, expandable to 6 GB; RAID 0, RAID 1 and JBOD are specified.
The enclosure is supplied without drives, so you’ll need to budget for compatible HDDs or SSDs.
Joybuy
Frequently asked questions
Is RAID 1 enough to back up completed design files?
No. The BSI notes that changes to mirrored data are applied to both copies, so mirroring isn’t a substitute for a separate backup. Keep a separate copy and test whether you can recover a file from it.
How do I organise an archive on a shared workstation?
Decide which design files should be stored centrally, then set up accounts and folder permissions to suit each person’s role. Restricting write access to completed projects may be a good idea. You should also back up the files separately from the NAS. The BSI describes network drives as a way to grant access on a need-to-know basis.
What else might I need to buy alongside the NAS enclosure?
Check what’s included and budget for compatible drives and a separate backup destination. QNAP says the TS-264 is supplied without HDDs. Depending on your network setup, you may also need to make changes to your computer’s connection, switch or cabling.
Can I use hard drives from other manufacturers in newer Synology Plus models?
It’s not a blanket no: Synology says that certain third-party HDDs and 2.5-inch SATA SSDs can also be used in storage pools on DiskStation Plus models from 2025 onwards running DSM 7.3. Check the specific model, DSM version and drive details. Synology says support is limited for unlisted drives.
What data protection rules apply to archived design files in Germany?
If the files contain personal data and the processing falls within the scope of the GDPR, controllers and processors must implement appropriate technical and organisational measures. The German Federal Commissioner for Data Protection and Freedom of Information (BfDI) explains this principle. Whether it applies to specific files and a particular role must be assessed on a case-by-case basis. A NAS model doesn’t automatically meet these obligations.