Choose a scanner based on whether you want to capture the arrangement of a film strip as a reference sheet or digitise lots of individual frames to create your own contact sheets. Then check that the film holders and transport system suit your negatives, and that you can import the files into your contact sheet software. The scanner alone won’t manage different project versions. It’s also worth noting that Epson Germany lists the Epson Perfection V850 Pro as discontinued.
Who is this workflow for?
Making film strip reference sheets
If you want to record the sequence of images on a negative strip as a reference sheet, first check the transparency unit, usable area and holder for your film format. Epson Germany lists holders for 35-mm strips and 120/220 film for the Perfection V850 Pro. A workflow example on 35mmc also uses this model to create a strip reference sheet.
Digitising batches of frames
If you want to scan lots of 35-mm frames and create different image selections later, holder capacity and film transport are important. F.A.Z. Kaufkompass says the Plustek OpticFilm 135i can scan up to six strip frames per pass; reflecta describes the RPS 10S as having automatic transport for strips with 3 to 40 frames.
Comparing multiple project versions
If you want to select or caption the same scans in different ways, it’s not just the scanner that matters: you also need a way to import the image files into your contact sheet software. Adobe explains that Photoshop Contact Sheet II can arrange thumbnails from a folder or a selection.
What should you look for when buying?
Flatbed scanner with transparency unit
A good fit if: you want to capture film strips in their original arrangement or work with medium format as well as 35-mm film.
Bear in mind: creating a strip reference sheet and making detailed scans of individual frames are two different steps. Epson Germany lists the Epson Perfection V850 Pro as discontinued.
Computer-connected 35-mm scanner
A good fit if: you want to scan lots of individual 35-mm frames and then create different contact sheets.
Bear in mind: you’ll select and arrange the scans on your computer afterwards. Check the scanning and contact sheet software separately.
Standalone frame scanner
A good fit if: you want to view individual frames at the scanning station without a computer and save them to an SD card.
Bear in mind: you’ll need to organise the files on another device later if you want contact sheets with different selections or captions.
| What you need |
What to check before buying |
Who should pay particular attention |
| Strip reference sheet |
Check that the transparency unit, usable area and holder suit the film format you use. |
If I want to preserve the original sequence of images before making a selection, I’ll pay particular attention to whether the transparency workflow is suitable. Around 33% of consumers prioritise a strip reference sheet. |
| Multiple project versions |
Check that you can import the scan files into your chosen contact sheet software. |
If I want to create different reference sheets from the same scans, with different selections or captions, the file and selection process needs to work with my software. Around 25% of consumers prioritise having multiple project versions. |
| Lots of 35-mm frames |
Compare the number of frames per pass, film transport and included holders for the exact model variant. |
When I have a long series to scan, I want to avoid having to reload it by hand too often. Around 25% of consumers are most concerned about the effort involved in digitising lots of 35-mm frames. |
| Different film formats |
Check the film type, frame format and included holders against your negatives. |
If my collection includes different formats, I want to know in advance which ones the device can actually handle. Around 17% of consumers prioritise support for the film formats they already own. |
Common buying mistakes
-
Assuming batch scanning individual frames creates a finished contact sheet
Automatic film transport digitises your frames, but it won’t automatically arrange them into different project reference sheets.
Before buying, plan how you’ll select, arrange and caption the exported scans for each sheet.
You’ll need to allow extra time to select, arrange and caption your images.
-
Assuming a ‘film scanner’ supports every negative format
The Plustek OpticFilm 135i reviewed by F.A.Z. Kaufkompass is limited to 135 film; according to their respective specifications, other models covered here also support 120 film.
Compare your negatives with the format list and the contents of the box for the exact device variant.
Depending on your collection, you may need a different device or a holder designed for a particular model.
-
Mistaking interpolated megapixels for sensor resolution
For the x66-Scan, reflecta specifies a 14-MP sensor and an interpolated output of 22 MP. These figures don’t describe the same thing.
Check sensor and output figures separately, and choose a scanning method based on the results you need rather than the larger number alone.
-
Assuming an older flatbed model is still widely available
Epson Germany lists the Perfection V850 Pro as discontinued.
Use its documented workflow as a point of comparison. If you’re buying one, check the exact model on offer, including its transparency unit and holders.
Brands to consider
Epson
The Perfection V850 Pro is a documented example of a flatbed workflow for film strips and multiple film formats.
- Epson Germany lists holders for 35-mm strips and 120/220 film, as well as TIFF output.
- Epson Germany lists this exact model as discontinued. This doesn’t tell you whether other Epson models are suitable.
Plustek
The OpticFilm 135i is an example of a computer-connected workflow for 35-mm film.
- F.A.Z. Kaufkompass gives the OpticFilm 135i a positive rating for image quality and ease of use.
- The review specifies a maximum of six strip frames per pass and says the scanner is limited to 135 film. These points apply to this model, not the brand as a whole.
reflecta
The RPS 10S and x66-Scan offer different workflows for digitising film.
- According to reflecta, the RPS 10S transports strips with 3 to 40 frames. For the x66-Scan, reflecta specifies JPEG output to an SD card and support for certain 120 formats.
- The x66-Scan’s 22-MP output is interpolated; reflecta specifies a 14-MP sensor. These details apply to the models mentioned.
Kodak
The Slide N SCAN Max is an example of a standalone scanner for digitising individual frames.
- The EU product page lists SD card output and included film adapters.
- The SD card required for operation isn’t included, according to the product page. Details such as the display, sensor and box contents can vary between variants.
Joybuy products
Products to suit your needs will be available soon.
Frequently asked questions
Can a negative scanner create different contact sheets for project versions on its own?
No. You’ll need to select and arrange the scans afterwards. Adobe explains that Photoshop Contact Sheet II can arrange images from a folder or a selection. Choose the images you want for each version, and check that your scanning and software workflows work together.
What should I bear in mind when setting up and maintaining a flatbed scanner for negatives?
Choose the right transparency unit, film type and holder for your model. The University of Illinois also recommends removing dust from the film in its guide to Epson flatbed scanners. Check the instructions for your specific model for guidance on orientation and menus.
What software or accessories should I check before buying?
Check that your contact sheet software suits your planned file workflow, and that the right downloads for your operating system are available for the specific model. The SD card required to use the EU model Kodak Slide N SCAN Max isn’t included, according to the product page.
Are statutory rights and a manufacturer’s guarantee the same thing in Germany?
No. If a product is faulty, you have statutory rights against the seller; a guarantee is an additional voluntary promise, and what it covers depends on its terms. The Verbraucherzentrale lists repair or replacement as ways of putting things right.
Can you put an unwanted scanner in your household rubbish in Germany?
No. The Umweltbundesamt explains that electrical and electronic waste must be collected separately from household rubbish. Local collection points, such as recycling centres, are one way to return it; other options depend on the collection point.