If you usually listen at low volume, choose a network streamer whose volume and, where relevant, EQ controls work sensibly with your existing system. EQ is an adjustment, not a proven sound improvement for every recording. Also check that the outputs and music services match your setup. A standalone streamer cannot power passive speakers without an amplifier, and headphone outputs and AirPlay 2 support vary by model.
Who is a network streamer for?
Quiet listeners with an existing system
If you often listen to folk at low volume, you may want to adjust settings without rushing to replace your amplifier and speakers. Whether everything works together also depends on where the volume is controlled. WiiM describes the EQ and volume settings on its models; depending on the playback route, volume may be controlled by a device further down the chain.
Listeners with a music service or their own library
If you want easy access to your recordings, check that your chosen service and network access are supported by the specific model. Cambridge Audio specifies a UPnP or DLNA media server for network files on the MXN10. Bluesound and WiiM describe the playback and streaming options available on their respective models.
Folk listeners with wired headphones
If your system doesn’t have a suitable headphone output, a player with its own output may be an option. Bluesound specifies a 6.35-mm headphone output on the NODE; you can’t assume the NODE NANO has the same feature.
What should you look for when buying?
First, check where volume and, if relevant, EQ are controlled. Then make sure the outputs, music access and any headphone connection will work with your existing system.
| Consideration |
What to check before buying |
Who is this important to? |
| Volume and EQ |
Which device controls the volume? Can you use the EQ with your chosen output and playback route? WiiM specifies fixed volume and disabled EQ for bit-perfect digital output from the Pro Plus. |
If I listen quietly and want to fine-tune playback when needed, I look for settings I can access. Around 36% of consumers put volume control and sound adjustment first. |
| Connecting to your system |
Check whether you have active or passive speakers, an existing amplifier or DAC, and spare RCA, optical or coaxial inputs. Passive speakers need an amplifier; WiiM highlights this for the Pro and Pro Plus. |
If I want to keep using my existing equipment, the player needs to match the available input and type of speaker. Around 29% of consumers prioritise connecting to their existing system. |
| Music services and library |
Check that your preferred service and transfer method are supported. For music files on the MXN10, Cambridge Audio specifies UPnP or DLNA rather than direct access to an SMB or NFS share. |
If I want to listen to music through a particular service or from a local library, I check how the specific model accesses it. Around 21% of consumers put access to services and their own music first. |
| Wired headphones |
Check the output on the exact model and make sure it matches your headphone plug. Bluesound specifies a 6.35-mm output on the NODE, but not necessarily on the NODE NANO. |
If I want to listen without disturbing anyone and my system doesn’t have a suitable headphone output, the connection on the player is essential. Around 14% of consumers prioritise wired headphones. |
Common assumptions to avoid
-
Assuming a standalone streamer is a complete system for passive speakers
Without suitable amplification, your playback chain isn’t complete for passive speakers. WiiM explicitly says an amplifier is needed to connect passive speakers to the Pro and Pro Plus.
Before choosing a player, check whether your speakers are passive or active and whether you already have an amplifier.
If you don’t have an amplifier, you’ll need an additional device for passive speakers.
-
Assuming features apply across an entire brand
According to WiiM, the WiiM Ultra doesn’t support AirPlay 2. The headphone output described by Bluesound is on the NODE; this doesn’t confirm that the NODE NANO has the same feature.
Check the full model name against the feature you need.
-
Expecting bit-perfect digital output and active EQ to be the same setting
For bit-perfect digital output from the Pro Plus, WiiM specifies fixed volume and disabled EQ.
Decide whether you want to use EQ or choose this signal path, and check which device further down the chain controls the volume.
-
Assuming a NAS share will work without checking how it’s accessed
For the MXN10, Cambridge Audio describes access to network files through a UPnP or DLNA media server, rather than directly from an SMB or NFS share.
Before buying, check that your NAS server supports access to your library in the way you need.
If you haven’t set up a compatible media server, you may need to do some additional configuration.
A guide to relevant brands
The features below apply to the models and product ranges mentioned. They aren’t blanket recommendations for an entire brand.
WiiM
The Pro Plus and Ultra may be worth considering if you want to match EQ settings and connections to your existing system.
- WiiM specifies AirPlay 2 and EQ for the Pro Plus. The Ultra offers features including HDMI ARC and a headphone output.
- According to WiiM, the Ultra doesn’t support AirPlay 2. The bit-perfect digital output described for the Pro Plus requires fixed volume and disabled EQ.
Bluesound
The NODE NANO is designed to connect to an existing system and work with BluOS multi-room audio; the NODE offers additional connections.
- Bluesound specifies analogue and digital outputs for the NODE NANO. The NODE also has a 6.35-mm headphone output and HDMI eARC.
- The additional connections on the NODE aren’t necessarily available on the NODE NANO.
Cambridge Audio
The MXN10 is a compact StreamMagic player for an existing hi-fi system, with access to music services or local music.
- Cambridge Audio specifies analogue and digital outputs, as well as AirPlay 2.
- For network files, Cambridge Audio specifies a UPnP or DLNA media server; a directly connected SMB or NFS share isn’t sufficient.
iFi audio
The ZEN Stream 3 is a digital streaming transport designed for use with a compatible external DAC.
- iFi audio describes USB and coaxial digital connections.
- To complete the playback chain, you’ll need a suitable DAC and volume control. Manufacturer claims about signal processing don’t prove a particular benefit when listening to folk quietly.
Suitable products at Joybuy
Suitable products coming soon.
Frequently asked questions
Can I connect a network streamer directly to passive speakers?
A standalone player such as the WiiM Pro or Pro Plus can’t power passive speakers without an amplifier. WiiM explicitly says an amplifier is needed for these speakers; active speakers instead need a suitable input.
How do I set up a player for listening at low volume?
First, check whether the player or the amplifier or active speakers control the volume. For bit-perfect digital output from the Pro Plus, WiiM specifies fixed volume and disabled EQ. If you want to use EQ, choose a different settings route and judge the playback for yourself.
Can the Cambridge Audio MXN10 play music directly from a NAS share?
For network files, Cambridge Audio describes a UPnP or DLNA media server, not direct playback from a Windows SMB or NFS share. Check that your NAS provides the server function you need.
Can an old network streamer go in household waste?
No. The German Environment Agency advises that waste electrical and electronic equipment must be disposed of separately from household waste. Local collection points and recycling centres are possible return options.