Which switch is right for you?

Home office with too few LAN ports

You want to connect a wired smart-home hub to your router alongside your PC or other work devices, and above all need enough ports. IKEA says the DIRIGERA Hub connects to the router via an Ethernet cable.

Home office with a separate IoT network in mind

You want to run devices in separate network segments and are happy to check their settings and accessibility. Home Assistant documents how to select a network interface for mDNS; device discovery also depends on your own network configuration.

Home office with PoE devices

You want to power an additional device that explicitly supports PoE through its network cable, as well as connecting your hub. Make sure the device’s PoE standard and power requirements match the specific switch.

What should you look for when buying?

What you need What to check before buying Who it matters to most
Enough ports Count the router uplink, hub and work devices you want to connect at the same time. On a 5-port model, one port is used to connect to the router; TP-Link lists five Gigabit RJ45 ports for the TL-SG105. If you want to connect your hub, PC and other work devices by cable at the same time, every connection you need counts. That’s why around 36% of consumers put the number of available ports first.
Quiet, straightforward operation Check the specific model’s fan details, placement requirements and configuration needs. NETGEAR says the GS305v3 is fanless and requires no switch configuration. If you’re putting the switch on your desk and don’t want to manage extra settings, straightforward operation is especially important. Around 29% of consumers prioritise simplicity and a quiet workspace.
Planned network separation Check the specific model’s VLAN support and management options. NETGEAR lists VLAN features for the GS305E, but network separation alone doesn’t ensure that your hub and app will find each other. If you want smart-home and work devices to run in separate network segments, you’ll need to make sure the devices involved can still communicate. Around 21% of consumers prioritise planned network separation.
PoE for additional devices Check the end device’s PoE support and power requirements against the switch’s standard, per-port power and total power budget. TP-Link lists four PoE+ ports and a total budget of up to 65 W for the TL-SG105PE. If you want to power an additional compatible device over Ethernet, don’t assume your hub supports PoE just because it has a network port. Around 14% of consumers prioritise powering a suitable end device.

Common buying mistakes

  • Assuming five ports means five extra device connections

    The connection from the switch to the router also uses a port. If you don’t count it, you may not have a port left for one of the devices you planned to connect.

    Allow for the router uplink, the hub and all the devices you want to connect by cable at the same time.

  • Assuming the hub’s Ethernet port means it supports PoE

    A network port alone doesn’t prove that a hub can be powered over Ethernet. IKEA says the DIRIGERA Hub uses a USB cable and power adapter.

    Check the power requirements for your exact hub model before making PoE a reason to buy.

    You’ll still need a separate power adapter if the hub requires one, even if the switch offers PoE.

  • Assuming VLAN guarantees that your hub will be discovered

    VLAN features let you configure your network, but they don’t automatically ensure that the controlling app can find the hub on a separate network.

    Check that communication works with your specific router, hub and app setup before separating devices.

    Extra configuration can mean more time spent setting things up and troubleshooting.

Brands to consider

TP-Link

The TL-SG105 is designed to add ports with minimal fuss, while the TL-SG105PE adds VLAN features and PoE+.

  • TP-Link Germany describes the TL-SG105 as fanless and ready to use without configuration.
  • The TL-SG105PE’s additional PoE+ features offer no proven benefit on their own for a hub with its own power adapter.

NETGEAR

The GS305v3 is suited to simply adding more ports; the GS305E is an option if you need manageable settings such as VLAN.

  • NETGEAR Germany describes the GS305v3 as a fanless unmanaged switch, and the GS305E as a web-managed model with VLAN and IGMP snooping.
  • The GS305E’s features aren’t automatically available on the GS305v3.

D-Link

The DGS-105 is a compact 5-port gigabit switch for straightforward wired connections.

  • D-Link describes the DGS-105 as a plug-and-play model with fanless operation and IGMP snooping.
  • These features apply to the DGS-105 and shouldn’t be assumed to apply to other D-Link models.

Zyxel

The GS1200-5 is aimed at people looking for a small web-managed switch for specific network settings.

  • Zyxel describes web management with configuration options and firmware updates.
  • If you want to manage settings, allow for more setup than you would with a plug-and-play switch.

Joybuy products

This selection includes basic and managed gigabit switches, as well as PoE+ models for compatible end devices.

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU

For planned VLAN separation if you want to manage your network through UniFi Network and check device accessibility yourself.

Joybuy lists five 10/100/1000 Mbps ports and VLAN support. Power options are listed as USB-C or PoE.

View at Joybuy
D-Link DGS-1005P/E with four PoE+ ports

D-Link DGS-1005P/E, 5-port gigabit switch

For your router, hub and other wired devices, plus additional end devices that explicitly support PoE+.

Joybuy lists five gigabit ports, four PoE+ ports and a total PoE budget of 60 W. Check the power requirements of every connected PoE device.

View at Joybuy
D-Link DGS-1210-10/E Smart Managed Switch

D-Link DGS-1210-10/E Smart Managed Switch

For a network where you want to use manageable settings such as VLAN, then check that your hub and controlling devices remain accessible.

Joybuy lists eight gigabit RJ45 ports and two SFP slots. The model is described as Smart Managed.

View at Joybuy
TP-Link TL-SG1005D 5-port gigabit desktop switch

TP-Link TL-SG1005D, 5-port gigabit desktop switch

For a simple way to expand a wired network when you don’t need to configure the switch.

Joybuy lists five 10/100/1000 Mbps RJ45 ports. TP-Link Germany describes it as plug-and-play, with auto-negotiation and auto-MDI/MDIX.

View at Joybuy
TP-Link TL-SG105PE Easy Smart Switch with four PoE+ ports

TP-Link TL-SG105PE, 5-port gigabit Easy Smart Switch

For planned VLAN configuration or an additional compatible PoE device. A hub with its own power adapter doesn’t need PoE just because it has an Ethernet port.

Joybuy lists five gigabit ports and four PoE+ ports with a total budget of 65 W. TP-Link Germany describes VLAN features; check the PoE requirements against the relevant port and the total budget.

View at Joybuy

Frequently asked questions

How do I connect a wired smart-home hub through a switch?

Connect one switch port to the router and another to the hub. IKEA says the DIRIGERA Hub connects to the router with an Ethernet cable; also check the connection and setup instructions for your own hub.

Will a PoE switch automatically power my hub?

No. Only plan for PoE if the documentation for your specific device confirms that it’s compatible. For example, IKEA says the DIRIGERA Hub uses a USB cable and power adapter. With PoE switches, the standard, per-port power and total budget must also meet the end device’s requirements.

What should I test after setting up a separate IoT network?

Check whether the controlling app can find the hub and the devices it needs on your actual network. Home Assistant documents how to select a network interface for mDNS; VLAN support alone doesn’t guarantee that a particular setup will work without further configuration.

How many ports should a switch have for a hub and home office?

Count the router uplink and all the devices you want to connect by cable at the same time. With a 5-port switch, connecting it to the router leaves room for four end devices; TP-Link Germany lists five gigabit RJ45 ports for the TL-SG105.

Which German requirements are relevant for a switch sold in Germany?

Electrical switches placed on the German market must meet the essential requirements of the EMVG. The Federal Network Agency lists CE marking and manufacturer details among the things it checks when monitoring the market; a shop description alone doesn’t conclusively prove that a specific device complies.