For the most even colour rendition, position light sources at the sides. The Canadian Conservation Institute describes placing a light on either side at a 45-degree angle as a way to illuminate a surface evenly and reveal its colours and tones. Check for reflections on the painting itself through your camera, as diffuse lighting doesn’t guarantee a reflection-free shot. If you want to bring out the brushwork, also try directional raking light. It highlights surface features, but can make even colour rendition more difficult.
Which lighting set-up is right for you?
Artists with glossy paintings
If varnish or glare obscures detail in your camera image, you’ll want to be able to adjust the light position rather than rely on a guaranteed reflection-free result. The Canadian Conservation Institute explains how the position of light sources affects the appearance of an object.
Artists who value colour accuracy
If you want to capture colours consistently, pay attention to even lighting, white balance and the specifications of the light itself. The Canadian Conservation Institute notes that LED lamps can vary in light quality, while Canon Europe explains how the colour of the incoming light affects how your camera reproduces colour.
Artists focused on brushwork and texture
If you want to show raised paint or surface sheen, you may need a different light position from the one you’d use for even colour documentation. The Canadian Conservation Institute describes raking light as a way to highlight texture and surface features.
Which buying criteria affect your shot?
First decide whether colour, surface texture or a complete set-up is your priority. Then check that the light modifiers are compatible with the equipment you already have.
| Your priority |
What to check before buying |
Who should pay particular attention? |
| Reflections and light control |
Check whether you can position the light modifier and stand to the side, then assess a test shot through your camera. |
If varnish or glare obscures detail, you’ll want to be able to adjust the light position. Around 36% of consumers put reflection control first. |
| Even colour |
Compare the colour rendition specifications for the specific light and set the white balance to match the light actually falling on your subject. |
If you want colours to look consistent across the whole surface, pay attention to the lighting and white balance. Around 29% of consumers prioritise colour rendition. |
| Consistent light for video |
Test your preferred dimming level with your frame rate and shutter speed, then check the video for visible flicker. |
If you want to record without visible fluctuations in brightness, test the light and camera together. Around 21% of consumers put consistent video lighting first. |
| Space and what’s included |
Check the mount, the space required and what’s included against your existing light and stand. |
If you’re choosing between a light modifier for equipment you already own and a complete kit, compatibility and space are key. Around 14% of consumers prioritise a set-up that fits their needs. |
Which softbox mistakes should you avoid?
-
Assuming a softbox guarantees a reflection-free shot
Diffuse lighting can help you document a painting evenly, but reflections also depend on the position of the light in relation to the painting. The lighting can also hide surface texture.
Decide whether colour or relief matters more, and if necessary test separate light positions for each type of shot.
Allow time to position the lights and take test shots.
-
Buying just the light modifier when you don’t have a light or stand
A softbox on its own doesn’t produce light. Individual Bowens softboxes are sold separately from compatible continuous lights.
Check the mount and what’s included against your existing equipment, and see whether you’ll also need a light or a stand.
-
Assuming the light’s lux rating tells you how bright it will be behind the softbox
Godox gives the maximum illuminance of the SL60IIBi with its standard reflector. This doesn’t tell you directly how the light will perform with diffusion or in your actual set-up.
When checking manufacturer specifications, look at the light, modifier and measurement distance, then check the exposure on your subject.
Which brands and product ranges are worth considering?
The product ranges listed below differ in whether you’ll need a separate light modifier or a kit with lights and stands.
amaran
The Light Box 45x45 is a compact Bowens softbox for smaller shooting areas. The COB 60x S is a separately specified, adjustable continuous light.
- According to amaran, the Light Box 45x45 comes with diffusers and a grid.
- A light isn’t included. The manufacturer’s CRI, TLCI and brightness specifications for the COB 60x S don’t show how a specific softbox combination will perform.
Godox
The SB-FW6060 is a rectangular Bowens softbox measuring 60 × 60 cm; the SL60IIBi is a continuous light sold separately.
- Godox describes the SL60IIBi as a dimmable light with an adjustable colour temperature of 2800–6500 K.
- The manufacturer’s illuminance figure applies with the standard reflector and can’t be transferred to the softbox.
Aputure
The Quick Dome 60 is a quick-to-assemble Bowens softbox, sold separately for use with compatible continuous lights.
- According to Aputure, it comes with diffusion, an inner diffuser and a 40-degree grid.
- It’s a light modifier, not a complete lighting set with a light and stand.
NEEWER
The documented two-light NL660 kit includes two bi-colour LED panels, softboxes and stands for a set-up with lights on either side.
- According to NEEWER, power supplies are included in the kit.
- Batteries aren’t included. The quoted CRI and illuminance figures are manufacturer specifications, not an independent assessment of how accurately the kit reproduces the colours of an oil painting.
Rollei
The click softbox with grid is a rectangular Bowens option if you want a larger light source or more directional light.
- Rollei describes it as having inner and outer diffusers and a rotating mount. It’s available in 60 × 90 cm and 70 × 100 cm sizes.
- If space is limited, check the dimensions and how much room the stand will need before buying.
Joybuy products related to this topic
Related products coming soon.
Frequently asked questions
Where should I position the lights to start with an even shot?
The Canadian Conservation Institute describes using two lights, one on either side at a 45-degree angle, to show colours and tones evenly. Check the result on the oil painting itself, as this lighting arrangement can hide its texture.
How can I show raised brushstrokes?
Try a separate shot with directional light falling at a shallow angle. The Canadian Conservation Institute describes raking light as a way to highlight texture and surface features, making it suitable for a different purpose from even colour documentation.
Can I use a Bowens softbox without any other equipment?
No, a softbox on its own doesn’t produce light. Check that its mount is compatible with your existing continuous light and see what’s included. If necessary, allow for a suitable stand too.
What should I check if the video flickers under artificial light or the colours change?
Record a short test using your planned camera and lighting settings. Nikon explains that visible flicker can depend on the interaction between the light source, frame rate and shutter speed. Canon Europe explains why you should set the white balance to match the light actually falling on your subject.
Does a CE mark prove that a light reproduces colours well?
No, a CE mark isn’t a measurement of how accurately colours are reproduced on a painting. According to the Federal Network Agency, the manufacturer uses it to declare that the product complies with the applicable regulations.