Which workflow is right for you?

Portrait archive, limited PC storage

You want to scan suitable old negatives as JPEGs directly to an SD card, without using a PC to begin with, then transfer and back up the files in an organised way later. reflecta describes direct SD card storage for the x33-Scan and x44-Scan.

Editing individual 35 mm portraits

You want to review and edit selected 35 mm images in scanning software and can make room for the required computer and storage space. Plustek lists the OpticFilm 8200i SE and 8300i SE for 35 mm film.

Portraits on different film formats

First, check whether your negatives were shot on 35 mm, 110, 126 or roll film, and whether the relevant holder is included with the specific model. For example, reflecta lists a separate 110/126 adapter set for the x33-Scan and x44-Scan.

What should you look for when buying?

Start by identifying the film format and deciding where you want to store your scans. Then you can work out whether an SD scanner or a computer-based workflow is a better match for your portraits.

What matters What to check before buying Who is it important to?
Storage without a PC Check whether the model saves directly to an SD card or needs scanning software and free space on the system drive. If my computer has very little free space, I want to save my first scans directly to a card. Around 36% of consumers prioritise saving their initial scans without a PC.
Editing individual images Check the film type, the software required and the free working and cache storage needed for the specific model. I want to be able to edit selected portraits on my computer and can make room for the necessary storage. Around 29% of consumers put image editing first.
Film format and holder Identify the format before buying and compare the box contents with the holders you need; some adapters are sold separately. If my archive contains different or older film formats, I need a compatible scanning area and holder. Around 21% of consumers prioritise compatibility with the film they already own.
Separate backup Plan how you’ll transfer the files and choose a separate storage device. Then check that you can open the copied files. After scanning, I don’t want to keep my portraits in just one place. Around 14% of consumers prioritise having a separate backup copy.

Common buying mistakes

  • Assuming an SD card is a backup

    If your scans are saved only to one card, you won’t have a separate copy if that storage device fails or gets lost.

    Transfer the files to a separate device and check that you can open the copy. Germany’s Federal Office for Information Security lists USB sticks and external hard drives as possible storage devices for personal backups.

  • Focusing only on high resolution figures

    For the reflecta x44-Scan, the manufacturer distinguishes between 4,920 × 3,280 sensor pixels and 6,000 × 4,000 interpolated output pixels. Interpolation doesn’t capture any additional image detail.

    Compare sensor or optical specifications separately from interpolated figures, and check that the film format and file workflow suit your needs.

  • Choosing a PC scanner when system drive space is limited

    For the Plustek OpticFilm 8300i SE, Plustek specifies up to 20 GB of free space on the main system drive for the cache, in addition to the space needed for the software.

    Before buying, compare these model-specific requirements with the free storage on your computer. Don’t assume the same figures apply to other scanners without checking.

  • Assuming the right adapters or memory cards are included

    Without a suitable holder or the required storage device, you may not be able to use the scanner as planned.

    Check what’s included for your film format. reflecta lists the 110/126 adapter set for the x33-Scan and x44-Scan separately. The supplier says the EU model Kodak SLIDE N SCAN requires an SD card, which is not included.

Key brands at a glance

reflecta

Models for scanning without a PC and saving directly to an SD card; supported film formats vary by device.

  • reflecta describes the x33-Scan and x44-Scan as saving JPEGs directly to an SD card. According to the manufacturer, the x66-Scan also supports 127 and 120 roll film, from 6 × 4.5 to 6 × 9 cm.
  • The 110/126 adapter set for the x33-Scan and x44-Scan is listed separately. Interpolated pixel figures are not the same as sensor resolution.

Plustek

The OpticFilm 8200i SE and 8300i SE are designed for computer-based scanning of 35 mm film.

  • Plustek specifies an infrared channel for both models. This is a manufacturer’s claim, not independent confirmation of any particular portrait quality.
  • For the OpticFilm 8300i SE, Plustek specifies up to 20 GB of free space on the main system drive for the cache, as well as 4 GB of free space for the software.

Kodak Photo Plus

According to the supplier, the EU model SLIDE N SCAN, with its 5-inch display, is a stand-alone scanner for the supported 135, 110 and 126 formats.

  • Kodak Photo Plus specifies included film adapters and direct SD card storage.
  • This EU model requires an SD card, which the product page says is not included; the stated limit is 32 GB. These details don’t necessarily apply to other SLIDE N SCAN versions.

Rollei

The PDF-S 240 SE is aimed at households that want to scan paper photos and slides as well as 35 mm negatives.

  • Rollei describes scanning without a computer and a slot for SD/SDHC/MMC cards. For paper photos, the manufacturer specifies formats up to 13 × 18 cm.
  • The stated 2,400 dpi is interpolated and doesn’t prove that the scanner offers equivalent optical detail resolution.

Epson

The Perfection V600 Photo is a point of comparison for a flatbed workflow with holders for 35 mm and 120/220 film.

  • Epson Germany lists film formats and TIFF output for this model.
  • Epson Germany explicitly marks the Perfection V600 Photo as discontinued. Its previous suitability therefore doesn’t indicate that it’s currently available from the manufacturer.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Is an SD card enough for a permanent portrait archive?

No. Make a separate backup copy as well. Germany’s Federal Office for Information Security lists USB sticks and external hard drives, among other options, as possible storage devices for personal backups. Also check that you can reopen the saved files.

Can I scan any old negative with a 35 mm scanner?

No. The film format and holder must be compatible with the scanner. For the x33-Scan, reflecta lists holders for 35 mm strips; for certain roll films, the manufacturer lists the x66-Scan. A separate adapter set for 110 and 126 is listed for the x33-Scan and x44-Scan.

What do I need before my first scan?

It depends on the model. The supplier says the EU model Kodak SLIDE N SCAN, with its 5-inch display, requires an SD card, which isn’t included. For the Plustek OpticFilm 8300i SE, you’ll need a suitable computer and the free storage space specified by the manufacturer for the software and cache.

Can I scan old portrait negatives for personal use and publish the images online?

Scanning for personal use and publishing the images later are legally separate matters. Section 53(1) of the German Copyright Act (UrhG) allows natural persons, subject to the conditions set out there, to make individual copies of a work for private, non-commercial use. For distributing or publicly displaying portraits, Section 22 of the German Art Copyright Act (KunstUrhG) generally requires the consent of the person depicted; Section 23 sets out exceptions and a further restriction based on their interests. The rights to the photograph and the circumstances of each case must also be considered separately.

Is a scanner worth it for printed photos too?

Only if you also want to scan prints. Alongside its transparency mode for film, Rollei lists a mode for paper photos up to 13 × 18 cm on the PDF-S 240 SE. So compare the originals supported by the specific model with what you need to scan.