Who are the different setups suitable for?

Interviewers with two speaking positions

If you want to edit the questions and answers separately later, check that you have two suitable microphone channels and that they can actually record to separate tracks. Shure describes a multi-track mode for the MV7i; you’ll need a suitable second microphone to use it.

Oral history projects in a fixed booth

You can test microphone placement and room noise before each session, and want a setup you can repeat consistently. The Oral History Association highlights preparation, interviewing, preservation and access as key elements of oral history.

Beginners looking for a straightforward recording setup

If you want to keep connections and accessories simple, and listen in as someone tells a longer story, check for a headphone socket, mounting options and what’s included. Audio-Technica lists a headphone socket for the ATR2100x-USB; accessories vary by model.

What should you consider when choosing?

Two microphones recording to separate tracks

A good fit if: you want to position each microphone independently and edit the two voices separately later.

Consider: you’ll need a second microphone and must make sure the connections, positioning and recording mode all work together.

One microphone positioned close by

A good fit if: you’re mainly recording the person telling the story and they can speak close to the microphone from a consistent position.

Consider: a second person sitting further away may not be picked up consistently, so test both seating positions.

Recorder with built-in microphones

A good fit if: you want to record without a computer and place the device between the participants.

Consider: how clearly both voices are recorded will still depend on where they are positioned in the room.

What you need What to check before buying Who is this important to?
Edit both voices separately Two suitable microphone channels and genuinely separate recording tracks; according to Shure, the multi-track mode on the Shure MV7i is designed for this. If I want to edit questions and answers separately, I check the microphone channels and track mode. Around 33% of consumers put independently editable voices first.
Clear sound from the seat Test the polar pattern, speaking distance and recording of both voices from the intended seats. If there’s little room to move in the booth, I want to hear how a voice sounds from the actual seat. Around 27% of consumers prioritise clear sound in the room.
Monitor the recording as you go Check for a headphone socket and monitoring; make sure the stand, boom arm and cables match what’s included with the specific model. If I want to listen in during a long interview, I look for easy monitoring and a simple setup. Around 20% of consumers prioritise monitoring while recording.
Storage and editing later Decide on the recording method, file handling and mode you need in advance; for example, check that the Zoom H4essential records to an SD card. If interviews need to be organised or edited later, I choose a recording workflow that suits the task. Around 20% of consumers prioritise editing and organising recordings later.

Avoid common misconceptions

  • One directional microphone automatically covers both seats

    A cardioid polar pattern picks up sound from the front more strongly. That doesn’t automatically mean it will capture a second person sitting further away or to the side just as clearly.

    Make a test recording with someone speaking from both seats, then listen to each voice separately. If you need to edit them independently, check that you have two microphone channels.

    A second microphone channel may require another microphone and suitable inputs.

  • USB and XLR connections mean the same setup and included accessories

    Connections and included accessories vary by model. RØDE says the PodMic USB needs a stand or boom arm for mounting.

    Before choosing a setup, check the full model name, the connection you need and exactly what’s included.

  • Noise reduction or 32-bit float guarantees clear voices

    Manufacturers’ claims about recording features are no substitute for checking how voices sound from the intended seats.

    Before the interview, listen to quiet answers, questions at a normal volume and pauses recorded in the actual booth.

  • Permission to record includes permission to publish later

    Section 201 of the German Criminal Code (StGB) covers, among other things, recording another person’s private spoken words without authorisation. Permission to record and permission for later use should therefore be agreed separately.

    Before the interview, agree with the interviewee on recording, storage and intended use. The Federal Commissioner for Data Protection and Freedom of Information also explains the requirements for using consent as the legal basis for processing personal data.

Useful brands to consider

Shure

The MV7i is worth considering for a setup that uses its own capsule alongside a second XLR microphone.

  • Shure describes multi-track recording and monitoring.
  • You’ll need another suitable microphone to mic up two people separately. The manufacturer’s claims about improved sound are not independent evidence.

RØDE

The PodMic USB is a dynamic USB/XLR microphone for recording one voice from close range.

  • RØDE lists a headphone output and pop filter.
  • RØDE says you’ll need a stand or boom arm for mounting. This doesn’t mean a single PodMic USB will pick up two people speaking from different distances equally well.

Audio-Technica

According to the manufacturer, the ATR2100x-USB combines a directional dynamic capsule with USB and XLR outputs.

  • Audio-Technica lists a headphone socket; the German product page includes cables and a desktop tripod in the box.
  • A cardioid polar pattern is no substitute for a test recording from the intended seats.

Zoom

The H4essential is a recorder with built-in microphones and connections for a future setup using external microphones.

  • Zoom lists two XLR/TRS inputs and recording to an SD card.
  • The manufacturer’s claims about 32-bit float or noise reduction don’t prove that a poorly positioned voice will be recorded clearly.

Samson

The Q2U is a dynamic USB/XLR option for a simple speaking position.

  • Samson lists a desktop tripod, windscreen, microphone holder and cables as included accessories.

Microphones and recording equipment at Joybuy

This selection includes mainly close-range voice microphones, as well as a wireless microphone system and a microphone kit with an audio mixer. If you’re recording two people, check that the specific equipment supports the recording setup you want.

FIFINE K688CTW dynamic USB/XLR microphone with boom arm

FIFINE K688CTW

For recording a voice close to the microphone at a computer; the boom arm lets you adjust its position.

Dynamic, unidirectional USB/XLR microphone with headphone socket, mute function and volume control. XLR cable not included; according to the product description, the controls only work via USB.

View at Joybuy
FIFINE AM8 dynamic USB/XLR microphone with desktop stand

FIFINE AM8

For recording a voice close to the microphone; the desktop stand is designed for the recording position.

Dynamic, unidirectional USB/XLR microphone with headphone socket and headphone volume control. XLR cable and boom arm not included; according to the product description, the controls only work via USB.

View at Joybuy
DJI Mic Mini 2S with two transmitters, one receiver and charging case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

For a wireless interview setup when speakers need room to move while seated.

The product title lists two transmitters, one receiver and a charging case. The product description mentions clip or magnetic mounting, and use with cameras, smartphones and PCs.

View at Joybuy
Dynamic USB/XLR microphone kit with desktop stand

Dynamic USB/XLR microphone kit with desktop stand

For recording a voice close to the microphone when you want to monitor the sound directly and adjust the input level.

The product description lists a cardioid polar pattern, headphone socket, gain control and mute function. A desktop stand, XLR cable and USB cable are included.

View at Joybuy
Yinkaer G10-P17 microphone kit with audio mixer and 3.5 mm microphone

Yinkaer G10-P17 microphone kit

For a recording setup with an audio mixer when you want to use the kit with a PC or mobile device.

According to the product description, it includes a 3.5 mm condenser microphone and desktop stand; the mixer has a built-in battery. The description says it supports PCs and mobile devices.

View at Joybuy

Frequently asked questions

Is one microphone enough for both interviewees?

It depends on where they’re sitting, how the microphone is positioned and how you want to edit the recording. If you want to edit both voices independently, it’s worth considering two microphone channels recording to separate tracks. Test every planned position in the booth rather than judging suitability by microphone type alone.

What should I set up and check before the first interview?

Mount the microphone according to its instructions, select the right input and listen to a short recording of both voices. For the PodMic USB, RØDE specifies a stand or boom arm, USB-C or XLR connectivity, and a 3.5 mm headphone output for monitoring.

What extra equipment should I budget for?

Check whether your setup needs a second microphone, stand, audio interface or cables, and whether they’re included with the specific model. What comes in the box varies by model; for example, RØDE specifies a stand or boom arm for mounting the PodMic USB.

Can I record a conversation in the booth without consent and publish it later?

Section 201 of the German Criminal Code (StGB) covers, among other things, recording another person’s private spoken words without authorisation. Check that you have permission before recording, and discuss storage and any planned publication separately. Processing personal data also requires an appropriate legal basis under the GDPR; the Federal Commissioner for Data Protection and Freedom of Information explains the requirements for using consent for this purpose.

Does an oral history interview have to be made publicly available straight after recording?

No, the choice of microphone doesn’t mean it has to be. The Oral History Association recommends planning storage and access early, and documenting informed consent. Any planned public release should be discussed separately. This professional guidance is not a substitute for checking the legal requirements for the specific publication.