Which setup is right for you?

Photographers capturing fine carving details

If you want to show recesses, tool marks and edges, it helps to be able to adjust the direction of the light and the shadows on the subject. Canon Europe describes directional lighting as a way to bring out texture through shadow.

Sellers taking product photos in batches

When photographing several figures for a catalogue or online shop, consistent results, wood tones and painted details are key. Canon Europe notes that natural light can also be used for product photography, while Calumet says continuous lighting makes it easier to assess the effect before taking the shot.

Photographers with a small or changing setup

If there’s limited room for your light, camera and figure, or you move between locations, think about mounting options, power and the accessories actually included. NEEWER and SmallRig’s variant and accessory information for their respective models highlights these considerations.

What should you look for when buying?

Adjustable COB continuous light

A good fit if: you want to highlight carving edges and recesses with side lighting, and adjust the shape of the light for each figure.

The trade-off: A diffuser or softbox takes up space and needs to be compatible with the specific model’s mount.

Bi-colour LED panel

A good fit if: you want an easy-to-position light source for small figures or repeatable online shop photos.

The trade-off: Softer, more even light can create fewer shadows in fine recesses. Also check whether a stand is included with the variant you choose.

Compact battery-powered light

A good fit if: you often change your shooting location or the position of your light, and don’t want a power cable near the subject.

The trade-off: Battery life depends on the operating mode. Check which charging accessories are included with the specific variant, too.

Natural window light

A good fit if: you’re photographing individual wooden objects in suitable daylight and can work around its changing availability.

The trade-off: If you need consistent results at different times of day, adjustable continuous lighting is easier to adapt to your setup.

Priority What to check when buying Who is this important to?
Show fine texture Side positioning and compatible light modifiers or flags If I want to show recesses and tool marks, I need control over the direction of the light and the shadows. Around 36% of consumers prioritise texture.
Capture consistent wood tones Adjustable white light and colour-rendering information; photograph a test piece using your own camera settings When photographing several figures or shooting on different days, I want to compare wood tones and painted areas more easily. Around 29% of consumers put colour consistency first.
Light source for a small setup Space for the light, stand and, if needed, softbox; consider the modifier and measurement conditions When space on my shooting table is limited, I need a light source that fits into my setup. Around 21% of consumers prioritise the space required and the size of the light source.
Power and changing locations Battery life in the intended mode, plus any included batteries, adapters and chargers When I’m shooting in different locations, I want to plan for power and battery life to suit how I’ll use the light. Around 14% of consumers put portability and power first.

Common buying pitfalls

  • Assuming shadow-free lighting shows every detail

    Very even lighting can reduce the small shadows that define carved recesses. Canon Europe describes directional lighting as a way to bring out texture.

    Compare a photo of the same subject in side lighting with one using more diffusion.

  • Comparing lux figures without checking how they were measured

    A light output figure measured with a reflector doesn’t automatically apply to a setup with a softbox. The measurement distance also affects how comparable the figures are.

    Only compare figures taken at the same distance and with similar modifiers, and also consider the size of the light source you need.

  • Confusing optional features with included accessories

    The fact that a light can be battery-powered or has a compatible mount doesn’t tell you what comes in a particular package.

    Check the model, mount and contents before buying. Depending on the kit, you may need to buy a battery, charger, stand, light modifier or mount adapter separately.

Brands to help guide your choice of lighting

Rollei

The models mentioned range from a desktop panel light to compact bi-colour continuous lights; they’re different types of setup.

  • Rollei says the LUMIS Key Light Pro comes with a desktop stand.
  • According to Rollei, the LUMIS Key Light Pro doesn’t include a USB power adapter. A Bowens adapter is listed as an additional accessory for the LUX Bi-Color offer. These details apply to the respective models and offer variants.

Godox

The ML60II Bi is a compact bi-colour COB continuous light for setups that call for a directional light source.

  • Godox specifies an adjustable colour temperature of 2.800–6.500 K and stepless power adjustment from 0–100 % for the ML60II Bi.
  • Battery power is optional, so check whether compatible batteries are included with the offer variant you’re considering. Manufacturer specifications don’t guarantee a particular look on wooden surfaces.

Nanlite

The Forza 60B II is a bi-colour spotlight for setups where you want to choose the shape of the light.

  • The manufacturer’s manual specifies a colour temperature range of 2.700–6.500 K and an FM mount.
  • The manual says a Bowens adapter is required for Bowens light modifiers. The technical specifications don’t guarantee a particular effect on any specific carving.

NEEWER

The NL660 is a bi-colour panel and an alternative to a COB light with a separate modifier.

  • According to NEEWER, the single panel comes with a white diffuser and power adapter.
  • A stand is included only with the “NL660 with Stand” variant. The manufacturer says this bi-colour version produces less light than its single-colour LED version.

SmallRig

The RC 60B is a compact COB light with a built-in battery, suited to setups that change location.

  • SmallRig specifies up to 45 minutes of run time at full power and up to 75 minutes in ECO mode.
  • According to SmallRig, the compatible 100-W PD charger is sold separately. Check the run time for your intended mode and the specific package version.

Joybuy products for different setups

The Joybuy products below include COB lights and compact video or RGB lights. The key considerations are the shape of light you want, colour control, power and the space available around your subject.

COLBOR 200W LED Video Light, bi-colour, COB

COLBOR 200W LED Video Light, Bi-Color, COB

Worth considering if you’re planning a COB setup with Bowens light modifiers. According to the product name, this model offers 200 W, bi-colour from 2.700–7.000 K, a Bowens mount and a built-in power supply.

Joybuy
COLBOR 60W LED Video Light, bi-colour and full colour

COLBOR 60W LED Video Light, Bi-Color und Full Color

The built-in battery is a useful option if you shoot in different locations. According to the product information, this model offers 60 W, bi-colour from 2.700–6.500 K, full colour and a built-in 59-Wh battery. A 20-V/3-A PD charger is required for charging.

Joybuy
ULANZI VL49 RGB LED video light

ULANZI VL49 RGB LED video light

The product name highlights rear magnets for mounting, which can be useful for a small setup. The light is dimmable, offers a colour temperature range of 2.500–9.500 K and has a 2.000-mAh battery.

Joybuy
Rollei LUX Compact RGB LED Light, 8W

Rollei LUX Compact RGB LED Light, 8W

Its compact size and built-in battery make it worth considering for small or changing setups. According to the product information, this 8-W light offers 2.500–9.000 K, adjustment in 1-% increments, CRI and TLCI of 98+, plus cold shoe and 1/4-inch mounts.

Joybuy
Ulanzi VL119 handheld video light, 10W

Ulanzi VL119 Handheld Video Light, 10W

The handheld design and built-in battery are useful for shooting in different locations. Product information lists 10 W, RGB colour, adjustable brightness, 2.500–9.000 K, a 3.300-mAh battery and 360 lux at 0,5 m.

Joybuy

Frequently asked questions

How should I start lighting a carved figure?

Make sure your camera is as steady as possible, then start by changing the direction of one main light as you assess the shadows in the recesses. If the contrast is too harsh, add softer light or some fill. If you want the carving’s texture to remain visible, completely shadow-free lighting may not be the best place to start.

Will any softbox fit any COB video light?

No, the mount needs to fit the light. The Nanlite Forza 60B II manual specifies an FM mount and says a Bowens adapter is needed for Bowens accessories. Check the mount, adapter and package contents for the exact model.

What extra accessories might I need?

Depending on the model and variant, you may also need a stand, light modifier, mount adapter, battery or charger. With the NEEWER NL660, whether a stand is included depends on the variant; SmallRig lists the compatible PD charger for the RC 60B as sold separately.

What should I check when buying an electrical light in Germany?

Check the information for the specific product, including its CE marking, product identification, manufacturer details and any required documents and instructions. The German Federal Network Agency includes these aspects in its market surveillance. According to the European Union, the CE marking is the manufacturer’s declaration that the product meets the relevant EU requirements; it isn’t a general, independent mark of quality.

What rights do you have when buying from a business seller?

For faulty goods, European Union consumer information states that you’re generally entitled to a minimum two-year legal guarantee from the seller; an additional manufacturer’s guarantee doesn’t replace it. When you buy online as a consumer, you’ll usually have a 14-day right to cancel, although exceptions may apply. The German consumer advice centre explains that the time limit and conditions can depend on the contract and the goods.