If your PC’s headphone output is powerful enough for your headphones, you don’t need an extra device just to get a DAC. Otherwise, a USB-powered DAC with a suitable headphone socket is a good place to start: iFi documents USB power for the uno, while FiiO does the same for the E10K-Type C. A desktop unit may suit you if you need more outputs or extra gain options, but power requirements vary by model. For example, the FiiO K11 needs an external 12 V power supply.
Which solution is right for you?
Listeners short on power sockets
If you listen at a desktop PC and don’t want to use another power socket, check whether the device gets both audio and power through the same USB connection. iFi documents this for the uno, and FiiO for the E10K-Type C. The K11, by contrast, is designed to use an external power supply.
Listeners with specific connection needs
If you want to keep using your wired headphones, first check that their plug matches the DAC’s socket. Then check the gain settings and power ratings for the output you’ll actually use and the relevant load.
Listeners with active speakers
If you also want to connect active speakers to your desk, look for a suitable line output and check whether its level can be adjusted.
What should you look for when buying?
| What you need |
What to check before buying |
Who is it important to? |
| Power without an extra socket |
Check the manual for the exact model to see whether USB carries both power and audio data, and what power supply is required. |
If I don’t have a spare socket at my desk, I’d like to use USB for both connections if possible. Around 42% of consumers say power without an extra socket is their main concern. |
| A suitable headphone connection |
Check that the plug and socket match; only compare power ratings when the output type, load and test conditions are the same. |
If my existing headphones have a particular plug, I want to connect them without needing an unsuitable adaptor. Around 25% of consumers prioritise their headphones’ connection and available amplification headroom. |
| Additional audio outputs |
Check for a suitable line output and whether it can be switched between fixed and variable levels. Passive speakers need a suitable amplifier. |
If I also want to use active speakers at my desk, I need a suitable output and, where necessary, an adjustable connection. Around 17% of consumers prioritise additional audio outputs. |
| Controls for your desk setup |
Check where the controls and switches are and what they do; after changing the gain, start listening at a low volume. |
If I want to adjust settings directly on the device, easy-to-reach controls matter to me. Around 16% of consumers say ease of use is their main concern. |
Common buying pitfalls
-
Assuming a USB input means USB power
A USB audio input doesn’t automatically mean the device can run without a power supply. FiiO specifies an external 12 V power supply for the K11. According to the manufacturer, the Douk K5 can run without an external DC power supply only if the USB current exceeds 2 A.
Check the manual for the full model name to find out what power supply is required and whether a USB connection to your PC is sufficient.
A device with an external power supply may use up an extra socket.
-
Treating the FiiO E10K and E10K-Type C as the same version
FiiO distinguishes the original E10K, which has Micro-USB, from the E10K-Type C, which has USB-C. So don’t assume the connection type or specifications of one version apply to the other.
Check the full model name and the socket on the device before choosing a cable or accessory.
A different socket may require a different connection cable.
-
Focusing only on the highest stated power output
Power ratings apply to specific outputs and loads. On their own, they don’t tell you whether your headphone plug will fit the device or whether a particular output is right for your headphones.
First check that the socket is suitable, then compare ratings only for the same output type and load.
An incompatible plug may mean you need a suitable cable or adaptor.
Key brands at a glance
FiiO
The E10K-Type C is a compact PC DAC, while the K11 offers more connections but uses a different power setup.
- FiiO documents a shared power and data connection for the E10K-Type C, along with 3.5 mm headphone, line and coaxial outputs.
- FiiO says the K11 needs an external 12 V power supply. The older E10K with Micro-USB is a different model version.
iFi audio
The uno is a compact USB DAC with a 3.5 mm output, while the ZEN DAC 3 offers additional headphone and line connections.
- iFi documents USB power for both models. The ZEN DAC 3 has 6.35 mm and 4.4 mm headphone outputs.
- The optional 5 V DC connection on the ZEN DAC 3 is an alternative to USB power; the manual says a DC power supply isn’t included.
Fosi Audio
The K5 Pro combines a desktop USB DAC with a microphone input and optical and coaxial inputs.
- Fosi Audio documents 5 V power via USB-C and a 3.5 mm headphone output.
- According to the manual, the microphone doesn’t work with an optical or coaxial input. For the console connection described, the K5 Pro won’t start up using a USB-A to USB-C cable.
Douk Audio
The K5 offers USB and optical inputs, among others, as well as 3.5 mm and 6.35 mm headphone connections.
- Douk Audio says USB-C can carry both audio and power.
- To use the device without the external DC connection, Douk Audio specifies a USB current of more than 2 A. Below that, the manufacturer recommends a 5 V/2 A power supply.
Creative
The Sound Blaster PLAY! 4 is a compact USB DAC option for listeners who also want to use a headset microphone or call features.
- Creative describes headset support, microphone muting and software features.
- These extra features don’t offer a distinct benefit if you only listen to music.
Products to suit you on Joybuy
Similar products will be available soon.
Frequently asked questions
Does every USB DAC save you a power socket?
No, it depends on the model. iFi documents USB power and audio for the uno, as does FiiO for the E10K-Type C; the FiiO K11 needs an external 12 V power supply. According to the manufacturer, the Douk K5 can run without an external DC power supply only if USB current exceeds 2 A.
How do I set up a USB DAC on my PC?
Connect the DAC using its designated USB port, plug your headphones into the right socket and select the DAC as your computer’s audio output device. First, check the instructions for your operating system and specific DAC: iFi specifies a PC driver for the uno, while Fosi Audio explains how to select the K5 Pro as the output device.
What should I bear in mind when changing the gain?
Start with the volume turned down, then adjust the gain or PowerMatch. iFi warns in the manuals for the uno and ZEN DAC 3 that listening at too high a volume could damage your hearing or equipment.
Can I connect passive speakers directly to a DAC?
You’ll need a suitable amplifier for passive speakers. A line output may provide a suitable connection for active speakers, but it won’t necessarily drive passive speakers directly.