A pen display is a good fit for this workflow if your computer can run it alongside your existing monitor, with the necessary video and data connections. Microsoft Support explains how to set up and arrange multiple detected displays, although whether a specific combination works depends on the computer and display. After that, what matters is the usable drawing area and—if colour accuracy is important—a clear, consistent approach to colour settings on both screens.
Who is a pen display right for?
Texture artists with an existing monitor
You want to paint on a pen display while keeping the 3D view or references on your existing monitor. The key things to check are whether an additional video output is actually available and whether the pen is assigned to the right screen. Blender Foundation documents Texture Paint in the Image Editor and 3D Viewport, while Microsoft Support explains how to arrange multiple displays.
Detail painters with lots of toolbars
You edit UV images or paint directly onto a 3D model, and want to see both the texture and your controls at the same time. Compare the usable area and resolution, rather than just the screen size. Wacom lists an active area of 345 × 215 mm for the Cintiq 16 DTK168K0B.
Texture painters who need colour accuracy
You assess colours across two displays and need clear colour modes and a consistent display workflow. A high colour gamut figure alone doesn’t prove that both screens will show the same texture in the same way. Huion lists selectable colour modes for the Kamvas 16 (Gen 3), while EIZO highlights limitations that calibration cannot eliminate.
What should you look for when buying?
Blender Foundation describes Texture Paint in the Image Editor and 3D Viewport, while Microsoft Support explains how to set up multiple displays. That makes both your computer’s ports and your specific painting workflow important when planning your setup.
| What matters |
What to check before buying |
Who it matters most to |
| Connection and pen assignment |
Video output, data connection and, where necessary, power supply; then test the display arrangement and pen assignment. |
If I want to keep using my existing monitor alongside the pen display, my computer needs to support both screens with the specific connection setup. Around 36% of consumers put connectivity and dual-screen use first. |
| Visible texture workspace |
Check the active drawing area and resolution using one of your own textures at your preferred display scaling. |
If I want to see texture details and toolbars at the same time, the usable drawing area matters more than screen size alone. Around 29% of consumers prioritise visible workspace for textures and tools. |
| Colour on two displays |
Check the colour modes and calibration options of the specific display, then compare the same file on both screens. |
If I need to assess a texture’s colour on both screens, I look for clear, consistent settings rather than relying solely on an advertised colour gamut figure. Around 21% of consumers prioritise consistent colour assessment. |
| Space and usability |
Measure the display and stand against your workspace; check what’s included and whether there are programmable controls. |
If there’s little room next to my existing monitor, I also need to allow space for my drawing hand, cables and stand. Around 14% of consumers prioritise space requirements and ease of use. |
Which mistakes should you avoid?
-
Assuming your computer’s USB-C port provides everything you need for a display
For dual-screen use, the video signal, pen input and, where necessary, power supply all need to work with your chosen setup.
Compare the connections on the specific display with the available outputs on your computer, and check the manual and what’s included before buying.
-
Assuming colour gamut figures mean colours will match
A colour gamut coverage or volume figure alone doesn’t tell you whether both screens will show the same texture in the same way. Panel limitations remain even after calibration.
Check the colour modes and workflow on both displays using the same file, rather than choosing solely on the basis of the highest advertised percentage.
-
Allowing space based only on screen size
Alongside your existing monitor, you’ll also need to allow space for the display’s casing, your drawing hand, cables and, where necessary, a stand.
Measure the available desk space and compare it with the dimensions, stand and included accessories of the specific model.
Key brands at a glance
XPPen
The Artist Pro 16 (Gen 2) is a pen display that comes with an X3 Pro pen, a folding stand and a shortcut remote.
- A separate remote may be useful if you want to position controls beside the drawing area.
- Check the connection type and control setup in the manual for the specific model.
Huion
The Kamvas 16 (Gen 3) is designed for workspaces where a display around 16 inches, with documented colour modes and QHD resolution, could be a good fit.
- Huion lists a 15.8-inch screen, 2,560 × 1,440 pixels, selectable colour modes and a factory calibration report for this model.
- These manufacturer specifications don’t prove that the display’s colours will match those on your existing monitor.
Wacom
The Cintiq 16 DTK168K0B is worth considering if its stated active area is important when planning your workspace.
- Wacom lists an active area of 345 × 215 mm, a 2.5K display, the Pro Pen 3 and built-in folding feet for this model.
- Check the exact model number, DTK168K0B: details such as resolution, what’s included and connections may not apply to other Cintiq 16 models.
Xencelabs
The Pen Display 16 Lite is an alternative for anyone considering a 16-inch 4K OLED pen display.
- The manufacturer lists a USB-C connection and offers this model with separately sold accessories, including a hub bundle, stand and Quick Keys.
- Don’t assume a single cable will be enough: check your computer’s port, the specific setup and what’s included.
Joybuy products
Similar products coming soon.
Frequently asked questions
How do I use a pen display alongside my existing monitor?
Connect the specific model to your computer as described in its manual. In Windows, you can identify and arrange detected displays; then check that pen input is assigned to the screen you want. Whether both displays work at the same time also depends on the video outputs available on your computer.
Can the pen display paint game textures by itself, or do I need software?
For this computer-based workflow, you’ll need suitable painting or 3D software. Blender Foundation documents Texture Paint in the Image Editor and 3D Viewport; the display hardware doesn’t replace those software features.
What should I do if colours look different on the two screens?
First, compare the colour modes and settings on both displays using the same file. Suitable calibration can help with colour-critical work, but EIZO notes that it won’t overcome panel limitations, such as a colour gamut that’s too small.
What are my rights if an online purchase in Germany is faulty?
According to Your Europe, when you buy from a trader in the EU, you’re generally entitled to a minimum two-year legal guarantee from the date you receive the goods; if something is faulty, you should normally contact the seller. A 14-day right to cancel also applies to many online consumer purchases. This is separate from any voluntary manufacturer’s warranty; the terms of your specific purchase still apply.