Who are the different sizes suited to?

Artists who use their desk for other things

If you put your display away after work, remember to factor in the cables and positioning as well as the device itself when considering how much space you need.

Illustrators creating detailed maps

With fine lines, labels and toolbars, you’ll need to weigh up how much of the map you want to see at once and how much desk space the display can take up.

Artists with limited space for connections

If you use a laptop or prefer a tidy workspace, check the video output, data connection, power supply and cables you’ll need as a whole.

What should you look for when buying?

Compact display around 12 inches

A good fit if: you want to reclaim desk space after drawing and can zoom in on map sections when needed. XPPen lists the Artist 12 3rd as 11.9 inches and says it has zoom controls.

The trade-off: You’ll see less of the map and fewer tools at once. The USB-C connection requires your computer to support a compatible video output.

Display around 13 inches

A good fit if: you’d like a little more working space but still want to put the device away. Huion lists the Kamvas 13 (Gen 3) as 13.3 inches and weighing 865 g.

The trade-off: You may still need to zoom and pan when working on complex maps. Huion says the full-featured USB-C cable is not included; depending on your connection, you may need an additional power supply.

16-inch display

A good fit if: you’d like to see map areas, labels and tools side by side more often, and have measured the space needed for the whole device. Wacom lists the Cintiq 16 DTK168K0B as having an active area of 345 × 215 mm and a 2.5K resolution.

The trade-off: Wacom lists the model as weighing 2.0 kg, and it takes up more space. It has integrated feet, but an adjustable stand is an optional extra.

On a small desk, screen size isn’t the only thing that matters. Measure the device, space for your drawing hand and cable routing, then check that the connection and working area suit your drawing software.

What matters What to check before buying Who is this most relevant to?
Desk space and storage Measure the available desk space, along with the dimensions, positioning angle and cable routing of the specific model. If I need to put the display away after drawing, I need to consider the total space it takes up, including the cables. Around 36% of consumers put available desk space first.
Map details and user interface Compare the active area and resolution. In your drawing software, check how much of the map remains visible with the tools easy to read. If I want to keep fine lines, labels and tools in view at the same time, I need to balance the visible working area against the space the display takes up. Around 29% of consumers prioritise visible map details.
Connections, cables and power Check your computer’s video output, the display’s compatible input, what’s included and the power requirements for your chosen connection. If I want a tidy workspace, the connection needs to work with my computer and fit the space I have for cables. Around 21% of consumers put connections and cable management first.
Colour and print output If you plan to print, check the colour mode and intended output workflow as well as the display. If I’m preparing colour maps for print, I need to consider the on-screen image and print file separately. Around 14% of consumers prioritise print output for their map illustrations.

Common buying mistakes

  • Comparing only the screen diagonal with the available desk space

    The screen diagonal doesn’t tell you how much space the complete setup needs. An adjustable stand is an optional extra for the Wacom Cintiq 16 DTK168K0B.

    Before buying, measure the available space and planned position, then compare the dimensions of the specific models you’re considering.

    Remember to allow space for cables and a comfortable grip on your pen. If you want an adjustable stand, bear in mind that it’s an optional extra for the Wacom model mentioned above.

  • Assuming USB-C guarantees a one-cable setup

    A USB-C connection may require your computer to support a compatible video signal. Huion says the full-featured USB-C cable is not included with the Kamvas 13 (Gen 3).

    Check your computer’s connection, the display input, what’s included and the power supply requirements for the specific model.

  • Assuming colour gamut coverage guarantees accurate map printing

    A manufacturer’s claim about on-screen colour doesn’t determine on its own how a printed map will look. Adobe describes preparing colour separations as a separate step; in Illustrator, this may involve changing the document to CMYK.

    For print work, choose the colour mode and intended output workflow independently of your display.

  • Confusing a better pen nib with geometrically accurate map boundaries

    When editing vector geometries in QGIS, software tools and the snapping tolerance you set also play a part.

    Set up the snapping options in your software to suit the map work you’re doing.

Key brands at a glance

XPPen

The Artist 12 3rd is a compact option for artists looking for a display around 12 inches.

  • XPPen lists the model as 11.9 inches, with 99% sRGB and zoom controls.
  • XPPen says the display cannot be used on its own. For the direct USB-C connection described, the computer must output DisplayPort; the manual also describes connecting via HDMI and USB-A.

Huion

At 13.3 inches, the Kamvas 13 (Gen 3) sits between a particularly compact display and a larger drawing area.

  • Huion lists the model as Full HD with 1,920 × 1,080 pixels, weighing 865 g, and factory colour-calibrated. These are the manufacturer’s specifications.
  • Huion says the full-featured USB-C cable is not included; power requirements depend on your setup.

Wacom

The Cintiq 16 DTK168K0B is worth considering if you have room for a larger active area.

  • Wacom lists the current model as having an active area of 345 × 215 mm, a 2.5K resolution and integrated feet.
  • The stated weight is 2.0 kg; an adjustable stand is an optional extra. Specifications for the older DTK1660 do not automatically apply to this model.

Find the right products at Joybuy

Related products coming soon.

Frequently asked questions

Can I draw maps on a pen display without a computer?

The XPPen Artist 12 3rd cannot be used on its own and, according to XPPen, must be connected to a computer or a compatible Android device. Check the requirements for the specific model and your drawing app.

Will any USB-C port on my laptop work?

No. For the USB-C video connections described in the manuals, your computer must support the required DisplayPort signal. XPPen also describes connecting the Artist 12 3rd via HDMI and USB-A; Huion lists a 3-in-1 cable as included with the Kamvas 13 (Gen 3), but says the full-featured USB-C cable is not included.

What size display should I choose for map illustration on a small desk?

If you need to put the device away regularly, start by comparing compact models around 12 to 13 inches. A 16-inch model may be an option if you want more working space visible at once and have room for the complete setup. Measure the device and cable routing rather than just the screen diagonal.

How can I keep lines and boundaries neat on a vector map?

When editing vector geometries in QGIS, set up the snapping options and an appropriate snapping tolerance in the software. According to the QGIS documentation, the tolerance affects whether a new vertex snaps to an existing geometry; this is not a feature of the display.

Is the display’s colour gamut coverage enough for printing a colour map?

An on-screen colour specification alone can’t predict how a printed map will look. If you’re preparing work for print in Illustrator, Adobe describes converting the document to CMYK as part of preparing colour separations.