Which setup is right for you?

Percussion with a few microphones

If you want to record individual instruments or use a small mic setup, start by counting how many signals you want to record simultaneously on separate tracks. Bonedo identifies the number of mic inputs as a key factor when choosing an interface.

Acoustic kit with individual tracks

If you want to record drums, cymbals or the room using several microphones at once, check how many microphone preamps are actually built in. Manufacturer specifications for line and digital inputs don’t automatically mean they’re microphone inputs.

Electronic drum setup

If you want to record module sounds or MIDI, first check the recording options on your specific module. Roland documents USB audio and MIDI recording for the TD-17; other models may differ.

What should you look for when buying?

First decide which recording task matters most to you, then check that the connections and features of the specific model meet your needs.

Priority What to check when buying Who is it important to?
Enough microphone preamps The number of built-in microphone preamps and signals you can record separately at the same time. If I want to record several drums and other sources individually, I need enough microphone inputs; around 31% of consumers put this need first.
The right size for a few microphones How many microphones you need to use at the same time, and whether you may also want to record other sources simultaneously in future. For a single percussion source or a small mic setup, I don’t want to plan for more channels than I need; around 25% of consumers prioritise finding the right size.
Recording options for a drum module Check the manual for USB audio, MIDI, driver mode and any additional microphone inputs you’ll need. If I want to record an electronic kit, I want to know whether the module already offers the connection I need; around 19% of consumers put this check first.
Room to expand later Check for a compatible external preamp and converter, and how many channels are supported at your chosen sample rate. If you’re planning to add more microphone channels later, you need a specific upgrade path, not just an extra digital socket; around 13% of consumers prioritise this option to expand.
Monitoring while recording Check the number of headphone outputs and whether you can create separate monitor mixes. If I need my own headphone mix while recording, I check the actual routing rather than just counting the sockets; around 12% of consumers prioritise this monitoring option.

Common mistakes when buying an audio interface

  • Confusing total inputs with microphone preamps

    The total number of inputs doesn’t tell you how many microphones you can connect at once. Steinberg lists six inputs on the UR44C, including four D-PRE microphone preamps; Tascam lists eight XLR microphone inputs on the US-16x08, plus additional line inputs.

    Check the specifications and count the built-in microphone preamps you can use with your setup at the same time.

    If you want to connect more microphones than you have built-in preamps, you’ll need compatible extra hardware or a different interface.

  • Assuming ADAT gives you ready-to-use microphone sockets

    ADAT carries digital channels; on its own, it doesn’t provide additional analogue microphone inputs. The number of channels you can use may also depend on the sample rate: PreSonus lists eight ADAT channels for the Studio 1824c, or four at 96 kHz.

    Plan for a compatible external preamp, the optical connection and your chosen sample rate together. Behringer lists eight additional ADAT channels for the UMC1820 at 44.1 or 48 kHz when used with an optional external preamp.

    To expand your setup this way, you’ll need a compatible external microphone preamp with a converter, as well as an optical connection.

  • Buying an interface for an electronic kit without checking the module

    Recording options vary from one module to another. Roland documents USB audio and MIDI recording for the TD-17; you can’t assume other models have the same feature.

    First decide whether you want to record the module’s sound, MIDI or additional acoustic microphones, then check your module’s manual.

Key brands and their models

Focusrite

The Scarlett 2i2 4th Generation and 18i20 4th Generation models cater for different channel requirements when recording percussion.

  • Focusrite lists two built-in microphone preamps for the Scarlett 2i2 4th Generation and eight for the Scarlett 18i20 4th Generation.
  • These specifications apply to these models. To add microphone channels beyond the built-in preamps, you’ll need compatible extra hardware.

Steinberg

The UR44C could be a good middle ground if up to four microphones connected at once will suit your recording plans.

  • The Steinberg manual lists four D-PRE microphone preamps among six inputs.
  • The six inputs don’t mean six microphone preamps. Also check that you have the headphone outputs you need and that the interface is compatible with your computer.

Behringer

The UMC1820 is designed for setups with several sources miked at once and the option to expand digitally.

  • Behringer lists eight microphone preamps, with a pad switch on every input.
  • To add the eight extra ADAT channels specified by the manufacturer at 44.1 or 48 kHz, you’ll need an optional external preamp. Phantom power is switched in groups.

PreSonus

The Studio 1824c is suited to setups with several microphone preamps and separate monitor mixes.

  • PreSonus lists eight built-in microphone preamps, two headphone outputs and four separate DSP monitor mixes.
  • The number of ADAT channels listed by the manufacturer drops from eight to four at 96 kHz.

Tascam

The US-16x08 combines microphone inputs with additional analogue line inputs.

  • Tascam lists eight built-in microphone preamps on the XLR inputs, plus additional line inputs.
  • The 16 analogue inputs in total aren’t 16 microphone inputs. Check driver and computer compatibility for your specific system.

Joybuy products: audio interfaces for percussion

The selection includes an audio interface or sound card kit with two microphones. It may be worth considering for a small mic setup, but check that it meets your needs.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

This kit may suit a small percussion setup, provided its connections and recording options work for the tracks you have planned.

The product description lists two 3.5 mm condenser microphones, effects and use with a computer or phone.

View at Joybuy

Frequently asked questions about audio interfaces for percussion

Do you need eight inputs to record percussion?

No. What matters is how many microphones you want to record simultaneously on separate tracks. Bonedo also describes recording methods using three or four microphones, and presents eight preamps as useful headroom for larger drum setups, not a general requirement.

Do I always need an audio interface for an electronic drum kit?

Not necessarily. Roland documents MIDI and audio recording via USB for the TD-17. For audio, the manufacturer specifies that you need to install a USB driver and select “VENDOR” mode. For other modules, check their manuals rather than assuming they have the same features as the TD-17.

What should I bear in mind with condenser or ribbon microphones?

Check whether your microphone needs phantom power and how it’s switched on the specific interface. In the US-16x08 manual, Tascam advises against using phantom power with a ribbon microphone if you’re unsure; on the Behringer UMC1820, phantom power is switched in groups for inputs 1–4 and 5–8.

Can I return an interface bought online?

For online purchases made by consumers, you generally have a 14-day right to cancel from the date you receive the goods. The Verbraucherzentrale notes that you must notify the seller you’re cancelling, and that exceptions apply.

What CE rules apply to an audio interface in Germany?

A newly marketed device must carry the required CE marking if it falls under harmonised EU legislation that specifically requires it. The European Union makes clear that CE marking isn’t a blanket requirement for every product; the rules for the specific device apply.