Which setup is right for you?

Multitrack percussionists

If you want to mic up several instruments at once and edit them separately later, the number of built-in microphone preamps is key.

Recording in a small booth

With limited space or an untreated room, mic placement and the sound of the room will affect your recording. Changing the interface alone won’t solve acoustic issues.

Recording with a basic headphone setup

If you’re starting out with just a few microphones, check how you can monitor the input signal through headphones while you play.

What should you look for when buying?

When recording percussion in a small booth, the right choice mainly depends on whether you prioritise separate mic tracks, control over room sound or a compact monitoring setup.

Two microphone preamps

Suitable if: You use no more than two microphones at once and don’t need to record any other instruments on separate tracks.

Consider: A two-channel setup has no built-in capacity for additional mic tracks.

Four microphone preamps

Suitable if: You want to record four microphones separately at the same time.

Consider: More mic channels are no substitute for suitable mic placement or checking how your booth sounds.

Eight microphone preamps

Suitable if: You want to record lots of percussion instruments or a drum kit on separate tracks at the same time.

Consider: Digital expansion connections require suitable external hardware for additional microphones.

What to look for What should you check? Who should pay particular attention?
Separate mic tracks List the microphones you’ll need to use at the same time and compare that number with the built-in microphone preamps. If I want to record several percussion instruments separately, I need enough preamps, not just a high total number of inputs. Around 36 % of consumers put separate mic tracks first.
Sound in a small booth Try out your planned mic positions in the room before allowing for extra channels for more microphones. If I want to reduce reflections in a small or untreated booth, I’ll first check the setup and how much room sound is being picked up. Around 29 % of consumers prioritise booth acoustics.
Headphone monitoring Check how many headphone sockets there are and how you can mix the input signal with computer playback. If I want to hear my input signal through headphones while I play, a suitable monitor path is important. Around 21 % of consumers pay particular attention to monitoring while recording.
Connection types and size Check which inputs on the specific model are for microphones, line-level sources and instruments, and look at the connections for your computer and other sources. If I’m only using a few microphones or want to connect a line-level signal as well, the right mix of connections matters to me. Around 14 % of consumers prefer a compact setup with suitable connections.

Common buying mistakes

  • Assuming every input is a microphone input

    On the MOTU M4, two of the four analogue inputs are microphone combo inputs. On the Scarlett 18i20 4th Generation, the total also includes digital expansion connections. Focusrite distinguishes these digital connections from the eight built-in microphone preamps.

    Compare built-in microphone preamps separately from line and digital inputs. To add more microphones via ADAT, you’ll need suitable external preamp hardware.

    Expanding via digital connections may require additional compatible preamp hardware.

  • Buying more microphones to fix poor booth acoustics

    Shure highlights the effect of room acoustics and mic placement, and notes that stereo miking in small or untreated rooms can pick up unwanted reflections. More channels won’t get rid of those reflections.

    Try using fewer microphones in different positions in the actual room before planning to add more.

    Extra microphones, stands and cables make your setup bigger, but won’t automatically improve the room sound.

  • Switching on phantom power without checking your microphones

    Focusrite warns that phantom power can cause problems with some older or passive ribbon microphones.

    Check the instructions for each microphone and how phantom power is switched on for the specific interface before enabling it.

Key brands to consider

Focusrite

The Scarlett models mentioned offer options ranging from a setup with two microphone preamps to a multitrack setup with eight.

  • Focusrite lists two microphone preamps for the Scarlett 2i2 4th Generation and eight for the Scarlett 18i20 4th Generation.
  • On the 18i20, digital expansion connections should not be mistaken for additional built-in microphone preamps.

Behringer

The UMC404HD is an option for connecting up to four microphones at once.

  • Behringer lists four microphone preamps, switchable phantom power and a monitor mix control.
  • Whether four channels are enough for your entire mic setup depends on how many signals you need to record at once.

MOTU

The M4 is worth considering for a small setup with microphones and additional line-level sources.

  • MOTU lists two microphone combo inputs, two additional line inputs and hardware direct monitoring.
  • The four analogue inputs are not four built-in microphone preamps.

PreSonus

The Studio 1824c is a multichannel model for sources that are being mic’d up at the same time.

  • PreSonus lists eight built-in microphone preamps. Its documented mixer software lets you create separate monitor mixes.
  • These details describe the model and are not an independent assessment of its sound quality.

Arturia

The MiniFuse 4 is a compact connection option if you want to use additional signals alongside microphones.

  • Arturia lists four inputs and two headphone outputs.
  • Check that the total number of inputs includes enough microphone connections for your needs.

Related products from Joybuy

A selection of audio interfaces, plus a podcast kit for recording with a computer or mobile device.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit

The kit is described as suitable for recording with a computer or mobile device, as well as for live streaming, singing and gaming. If you want separate percussion tracks, check how many built-in microphone preamps it has before buying.

The product name indicates that it includes two 3.5 mm condenser microphones and stands.

View at Joybuy

Frequently asked questions

Are four inputs enough for four microphones?

Only if the specific device has four suitable microphone preamps. Behringer lists four for the UMC404HD. Of the MOTU M4’s four analogue inputs, two are microphone combo inputs and two are line inputs.

What should I check before my first recording in a small booth?

Try out mic positions in the actual room, set your input levels and check the headphone monitor path. With condenser microphones, check whether phantom power is needed. If you’re using older or passive ribbon microphones, read the instructions before switching it on.

Does an ADAT input count as an extra microphone preamp?

No. For the Scarlett 18i20 4th Generation, Focusrite distinguishes the built-in analogue microphone preamps from the digital expansion connections. To add microphones via ADAT, you’ll need suitable external preamp hardware. Remember to check compatibility too.

What are my rights when buying online privately in Germany?

If you’re buying as a consumer from a professional seller, Your Europe, the European Union’s consumer information portal, explains your statutory two-year guarantee for faulty goods and the general 14-day right to cancel distance contracts. The statutory guarantee is different from a voluntary manufacturer’s warranty, and exceptions may apply to cancellations.