For recording percussion in an untreated room, an interface with two microphone preamps is enough if you want to record no more than two microphones at once onto separate tracks. If you want to mic up several drums individually, you’ll need more built-in microphone preamps. Then choose level controls and monitoring to suit the way you work. To reduce unwanted room reflections, focus above all on microphone positioning and instrument placement: a larger or more expensive interface alone won’t solve the room problem.
Which setup is right for you?
For multi-track percussion recording
If you want to record several drums at once with individual microphones and edit them separately later, the number of built-in microphone preamps matters. Focusrite, Audient and other manufacturers offer models with eight preamps for this purpose.
For recording in a reverberant room
If you want to limit how much of the room comes through in your recording, plan your microphone positioning and instrument placement alongside your choice of interface. Shure identifies room acoustics and microphone technique as important factors when recording drums.
For beginners with a small microphone setup
If you’re starting out with no more than two microphones, an interface with two microphone preamps may be enough. Focusrite lists the Scarlett 2i2 4th Gen as having two built-in microphone preamps.
What should you look for when buying?
First, decide how many percussion sources you want to record simultaneously onto separate tracks. Treat room sound, levels and monitoring as separate considerations, rather than relying on the interface’s features alone to address them.
| Buying criterion |
What to look for |
Who it matters most to |
| Microphone inputs for simultaneous recording |
Count the microphones you need and check how many built-in microphone preamps the interface has. Line and ADAT connections are not automatically microphone inputs. |
If you want to record several drums separately, you’ll need enough actual microphone preamps. Around 36% of consumers put the number of microphones that can be recorded simultaneously at the top of their list. |
| Room sound |
Plan to try different microphone positions and instrument placements. Choose the number of channels to suit your microphone technique, not as a supposed way to correct the room. |
If the room sounds too prominent in your recording, try different microphone positions before buying more channels. Around 29% of consumers prioritise being able to control how much of the room comes through. |
| Level peaks |
Check the metering and gain controls on the specific model, then test it with a forceful playing session. Automatic level-assistance features vary by manufacturer and are no guarantee against clipping. |
If you’re recording loud hits, you’ll want to keep an eye on the input level easily. Around 21% of consumers put level control first. |
| Monitoring and expansion |
Check the available monitor mixes. If you’re planning an ADAT expansion, also check the extra hardware, sample rate and synchronisation requirements. |
If you need your own monitor mix while playing or have a specific expansion in mind for later, the right signal path matters. Around 14% of consumers prioritise monitoring or a planned expansion. |
Common buying mistakes
-
Confusing the total number of inputs with the number of microphone inputs
Line and ADAT inputs are not automatically built-in microphone preamps. Check how many microphones you can connect directly to the specific model.
If you’re adding more microphones, you may also need suitable external preamps.
-
Expecting a more expensive interface to solve room reflections
The microphone also picks up reflections from the room. If you’re unhappy with the room sound, Shure recommends trying a closer microphone position or some form of screening, among other options.
Test microphone positions and instrument placement in the room you’ll actually be using before treating the interface’s features as a solution to the room.
-
Assuming ADAT channels are ready-to-use microphone inputs
Additional digital channels do not replace external microphone preamps. Focusrite’s described dual-ADAT setup for the Scarlett 18i20 4th Gen requires specific software, sample rate and clocking settings.
You’ll need compatible extra hardware and optical cables for this expansion route. Check the instructions for the devices involved before planning your setup.
Key brands to consider
Focusrite
The models mentioned range from the compact Scarlett 2i2 4th Gen, with two built-in microphone preamps, to the Scarlett 18i20 4th Gen, with eight.
- Focusrite describes level-assistance features for these models; the 18i20 also has ADAT connections.
- The additional ADAT channels on the 18i20 in the dual-ADAT setup described require compatible software, sample rate and clocking settings, as well as expansion hardware.
Audient
The EVO 16 is an example of an interface with eight built-in microphone preamps and a workflow designed for setting levels across multiple channels.
- Audient describes Smartgain as a way to set the levels of all eight channels at once.
- This is the manufacturer’s claim, not independent evidence of a sound-quality advantage for every percussion recording. Microphone positioning and the room still need separate attention.
PreSonus
The Studio 1824c is an eight-preamp model for multi-track setups, with software-controlled monitor mixes.
- PreSonus lists eight built-in microphone preamps and describes separate low-latency mixes in Universal Control.
- These details describe the features and workflow, not an independently proven sound-quality advantage.
Tascam
According to Tascam, the US-16x08 combines eight microphone preamps with additional line inputs.
- Tascam describes an integrated DSP mixer and eight built-in microphone preamps.
- The 16 analogue inputs in total are not 16 microphone preamps. Also check operating system support for your computer.
RME
The Fireface UCX II is a compact alternative with two mic/line preamps, plus additional line and digital connections.
- RME describes flexible mixer and monitoring features.
- You’ll need additional suitable preamps to connect more than two microphones directly. The total channel count is not the same as the number of microphone inputs.
Joybuy products
Products to suit your needs coming soon.
Frequently asked questions
Can a better audio interface remove the sound of an untreated room?
No. Choosing a particular interface won’t remove the room sound. First, compare microphone positions and listen to how much of the room is being picked up. If you’re unhappy with the room acoustics, Shure recommends trying a closer microphone position or some form of screening, among other options.
Do eight advertised inputs always mean eight microphone inputs?
No. Check the number of built-in microphone preamps specifically, as well as the type of other connections. Tascam lists eight microphone preamps on the US-16x08, alongside additional line inputs.
What should I consider when expanding with ADAT?
Set it up according to the instructions for the devices you’re actually combining: digital inputs alone don’t provide extra microphone preamps. For the Scarlett 18i20 4th Gen expansion described by Focusrite, the mode, sample rate and clocking must all be compatible, among other things.
What should I check before recording and when changing computers?
Before your session, check the signal path, levels and monitor mix. If you change computers or operating systems, check the manufacturer’s model-specific driver and compatibility information.
What requirements apply to an audio interface sold in Germany?
Electrical and electronic equipment must meet the applicable requirements, including rules on electromagnetic compatibility. The German Federal Network Agency outlines the responsibilities of economic operators and the importance of CE marking. A product description alone does not prove that a specific listing has been checked.