For a single, loud percussion instrument, a close-positioned instrument microphone with a cardioid pickup pattern is a good choice, provided you have a suitable XLR recording setup. If you want to record on a computer without a separate interface, you could choose a USB microphone; for stereo or spatial detail, consider a pair of microphones or a portable recorder. No pickup pattern will eliminate all conversation or desk noise, so positioning and a mount that is as isolated from vibrations as possible are still important.
Who is this selection for?
Percussion players at a shared desk
If you’re recording a single instrument, nearby movement and conversation can be distracting. Shure and AKG describe suitable instrument microphones; direction, distance from the sound source and how the microphone is mounted on the desk are all important factors to consider.
Beginners without an audio interface
If you want to record directly on your computer, check that a USB model suits your connections and monitoring needs. An XLR microphone, on the other hand, requires a suitable recording setup. Audio-Technica’s AT2020 XLR model requires a full 48 V of phantom power.
Players looking for stereo
If you want to capture spatial detail or several percussion sounds, allow for enough room to position the microphones and make sure you have the right number of input channels. RØDE also offers the NT5 as a matched pair, while the Zoom H1essential has built-in X/Y microphones.
What should you look for when buying?
At a shared desk, the microphone, connection and setup all need to work together. A suitable connection alone won’t prevent clipping or stop desk vibrations and conversation from being picked up.
| What you need |
What to check before buying |
Who should pay particular attention? |
| Reducing interference and desk vibrations |
Check the pickup pattern, position the microphone close to the instrument and consider how it is mounted. A shock mount won’t automatically block out conversation. |
If I want to record a single percussion source at a shared desk, I want to keep conversation and vibrations out of the recording as much as possible. Around 36% of consumers put a clean recording of a single source first. |
| Capturing loud strikes |
Check the maximum SPL of the exact model and test the loudest strikes in a trial recording. AKG specifies up to 156 dB for the D40; this is a manufacturer figure for that specific model. |
If my strikes are powerful and brief, I want to know whether the microphone and recording setup can handle the peaks. Around 29% of consumers prioritise headroom for loud percussion. |
| Choosing the right connection |
Check your computer’s available connections, XLR inputs, cables, monitoring and, where needed, phantom power against the exact model. Audio-Technica’s AT2020 XLR requires a full 48 V of phantom power. |
If I don’t want to set up a separate interface, a connection I can use straight away matters to me. With XLR, I’ll plan for the extra equipment I need. Around 21% of consumers prioritise a simple, compatible recording setup. |
| Stereo and spatial detail |
Decide whether a single mono track will do. For an external stereo pair, allow for suitable input channels and the required power supply; the RØDE NT5 is also available as a matched pair. |
If I want to capture spatial detail, I’m happy to make room for a suitable stereo recording setup. Around 14% of consumers put spatial or stereo recording first. |
Common misconceptions
-
‘Cardioid’ means other people won’t be heard
A pickup pattern describes the direction from which a microphone picks up sound. It won’t eliminate all noise at a shared desk or guarantee a recording free from distractions.
Point the microphone towards the percussion and make a trial recording to check how conversation and desk noise sound in your actual setup.
-
USB, XLR and phantom power are interchangeable between variants
According to Audio-Technica, the AT2020 XLR model requires a full 48 V of phantom power; the AT2020USB-X is a different model with a USB-C connection.
Check the full model name, connection and power requirements before pairing the microphone with your recording equipment.
-
A matched pair of NT5s is the same as a single microphone
A stereo pair consists of two microphones and needs a suitable two-channel recording setup. The available space can also be a deciding factor at a shared desk.
Decide whether mono will do before you buy. For stereo, check the input channels and make sure there’s room for both microphones.
-
32-bit float makes the Zoom H1essential immune to loud strikes
Zoom specifies up to 120 dB SPL for the H1essential’s built-in microphones. The recording format doesn’t change the microphones’ stated maximum SPL.
Choose a suitable distance from the percussion for the microphone and check your loudest intended strikes in a trial recording.
Brands to consider
Shure
The dynamic SM57 is designed for close-miking individual drums, percussion and instruments with an XLR recording setup.
- Shure describes it as having a cardioid pickup pattern and being suitable for high instrument SPL.
- Positioning still matters; for snare, Shure recommends leaving enough distance to avoid the stick hitting the microphone.
AKG
According to AKG, the dynamic D40 is designed for drums and percussion and comes with a mounting bracket.
- AKG specifies an XLR output and up to 156 dB SPL for the D40.
- These specifications don’t prove that it will block out all other desk noise or connect directly via USB.
RØDE
The NT5 is designed for detailed and stereo recording and is also available as a matched pair. The NT1 5th Generation is a separate large-diaphragm model with USB and XLR.
- RØDE specifies P48 and a maximum of 143 dB SPL for the NT5. For the NT1 5th Generation, it lists a maximum of 142 dB SPL and includes a shock mount.
- The recording setup and positioning differ between models; the NT5 specifications don’t automatically apply to the NT1 5th Generation.
Audio-Technica
The AT2020USB-X is a USB-C option with monitoring; the AT2020 is a separate XLR model.
- Audio-Technica describes the AT2020USB-X as including a desk stand, with the compatible AT8455 shock mount available as an optional extra to reduce vibrations.
- According to Audio-Technica, the AT2020 XLR requires a full 48 V of phantom power; this requirement doesn’t automatically apply to the USB version.
Zoom
The H1essential is a portable recorder with built-in X/Y microphones and a USB microphone function, making it a good option if you can record away from your desk.
- Zoom specifies up to 120 dB SPL for the built-in microphones and 32-bit float recording.
- The recording format doesn’t increase the stated maximum SPL of the built-in microphones.
Microphones for computer recording
This selection includes microphones for computer recording with USB or a USB/XLR combination. For close-miking percussion, pay particular attention to the pickup pattern, positioning and how the microphone is mounted at a shared desk.
No image available
FIFINE K688CTW dynamic USB-C/XLR microphone with boom arm, white
If you want to connect directly to your computer via USB or use XLR instead, this dynamic microphone offers both connection types and comes with a boom arm and shock mount.
USB-C and XLR; headphone socket, mute function and gain control. According to the description, an XLR cable isn’t included.
View on Joybuy
No image available
FIFINE AM8 dynamic USB/XLR microphone
If you want to focus on recording a single sound source and choose between USB-C and XLR, the AM8 has a unidirectional pickup pattern.
USB-C and XLR; headphone socket and desk stand. According to the description, an XLR cable and microphone boom arm aren’t included.
View on Joybuy
No image available
JBL Quantum Stream Studio USB-C condenser microphone
If you want to try different recording directions, this condenser microphone offers cardioid and stereo pickup patterns, among others, as well as direct monitoring.
USB-C; selectable pickup patterns, including cardioid and stereo.
View on Joybuy
No image available
Stream 410 HD USB condenser microphone
If you’re looking for a USB microphone for several people or sound sources, note that this model has an omnidirectional pickup pattern. It’s less focused for recording a single percussion source at a shared desk.
USB connection, mute function and pop filter; omnidirectional pickup pattern.
View on Joybuy
Frequently asked questions
Will a USB microphone do if I don’t have an audio interface yet?
A USB model such as the AT2020USB-X can be used directly with a computer. An XLR microphone, on the other hand, needs a suitable recording setup; according to Audio-Technica, the AT2020 XLR requires a full 48 V of phantom power.
How can I stop desk vibrations from getting into the recording?
If possible, place the percussion and microphone on separate surfaces so they aren’t both on the same vibrating surface. Audio-Technica describes the optional AT8455 shock mount as compatible with the AT2020USB-X and designed to reduce vibrations; it’s still worth checking the result with a trial recording.
What else should I consider when using a stereo pair?
Check that your recording device has two suitable input channels and that you have enough room for both microphones. The RØDE NT5 also requires P48.
Can I record other people talking at a shared desk?
Processing recordings of identifiable people may require a legal basis under the GDPR. The Federal Commissioner for Data Protection and Freedom of Information names consent as one possible legal basis, but not the only one. Don’t automatically assume that recording other people’s conversations as part of an instrument recording is acceptable.
Does 32-bit float make the Zoom H1essential immune to loud percussion?
No. Zoom specifies up to 120 dB SPL for the built-in microphones; 32-bit float doesn’t change this stated maximum SPL. Check the microphone position using the loudest strikes you intend to record.