Which setup is right for you?

Recording percussion on multiple tracks

If you’re miking several instruments at once and want to edit them separately later, the number of built-in microphone preamps matters. Depending on the model, manufacturers specify two, four or eight preamps for their Scarlett, UMC, EVO and Studio ranges.

Recording in a reverberant hall

If you want to balance the percussion with the sound of the room, plan your microphone positions and listen to a test recording on location. Shure highlights the relationship between close and room microphones when recording drums.

Small, mobile recording setups

If you’re only using a few microphones, a smaller setup can make it easier to set up, check levels and monitor through headphones. Focusrite describes Direct Monitoring as listening to the input signal with virtually no latency.

What should you consider when choosing?

First decide how many microphones need their own tracks at the same time. Then consider the room sound, the size of your setup and how you’ll monitor it.

Consideration What to check before buying Who is it most relevant to?
Separate microphone tracks Match the number of microphones you need to use at once with the number of built-in microphone preamps. Line and ADAT inputs don’t count as additional microphone preamps unless you have the right extra equipment. If I want to edit several percussion instruments separately after recording them at the same time, I need enough built-in preamps. Around 36% of consumers put recording on separate tracks first.
Controlling the room sound Plan for close and room microphones on separate channels, and listen to a short test recording in the mix too. The room and microphone positions shape the sound; combining several microphones can cause phase problems. If I want to assess the reverb in the community hall, I want to listen to the close and room signals separately and together. Around 29% of consumers prioritise control over the room sound.
Size of the microphone setup Distinguish between the number of microphones you plan to use now and any possible future expansion. Check how many microphone preamps can be used simultaneously on the specific model. If I’m only using a few microphones at once, I don’t want to plan for more channels than I need. Around 21% of consumers prioritise a suitably sized, compact setup.
Level control and monitoring Check the level meters, available pads or other level controls, as well as the headphone outputs and monitor routing on the specific model. If I want to check levels and monitor directly during a percussion session, the monitor path needs to suit my workflow. Around 14% of consumers see monitoring and levels as their main concern.

Common selection mistakes

  • Confusing the total number of inputs with the number of microphone inputs

    The stated total may include digital or other inputs. For recording separate microphone tracks, what matters is the number of built-in microphone preamps you can use at the same time.

    Compare the number of preamps with your microphone plan, and check which inputs can actually take microphone signals.

    You may need an external preamp and a suitable connection to add more microphone tracks.

  • Assuming more channels will solve a reverberant hall

    The room and microphone positions shape the recording. Combining several microphones can also cause phase problems.

    Test your microphone positions with a short recording and listen to the individual signals as well as the combined result. Do this before choosing a larger interface just to address the room sound.

  • Assuming phantom power works the same way on every device

    Manufacturers’ specifications differ: some models let you switch 48V phantom power on for individual channels, while others switch it by group or globally.

    Check how it works on the specific model and make sure it suits the microphones you’re using.

Relevant brands to consider

Focusrite

The documented Scarlett models range from the 2i2 4th Gen, with a two-microphone setup, to the 18i20 4th Gen, with eight microphone preamps.

  • Focusrite documents channel-by-channel switching for 48V phantom power and level meters on the 18i20.
  • The 2i2 has two built-in microphone preamps; features on individual models don’t necessarily apply to the whole range.

Behringer

The UMC404HD has four built-in microphone preamps, while the UMC1820 has eight, catering for different-sized multitrack setups.

  • Behringer specifies input pads for both models.
  • According to the manufacturer, 48V phantom power on the UMC1820 is switched in two groups: inputs 1 to 4 and inputs 5 to 8. Check the groupings if your microphones have different requirements.

Audient

According to Audient’s specifications, the EVO 16 is designed for larger sessions, with eight built-in preamps.

  • Audient describes Smartgain as automatic level setting across all eight channels at once.
  • Smartgain is a manufacturer feature, not independent evidence of a sound-quality advantage. Check the room and levels with a test recording.

PreSonus

According to PreSonus, the Studio 1824c combines eight built-in microphone preamps with ADAT expansion and multiple monitor mixes.

  • The documented monitor mixes may be useful when planning several monitoring paths.
  • PreSonus describes 48V phantom power on this model as globally switched.

Tascam

The US-16x08 is a technical example with eight XLR microphone inputs and additional line inputs.

  • Tascam specifies eight microphone preamps and eight additional balanced line inputs.
  • Tascam lists the US-16x08 as a discontinued product. This alone doesn’t tell you whether individual retailers currently have it in stock.

Joybuy products

Related products coming soon.

Frequently asked questions

How many inputs do I need for recording percussion in a community hall?

Count the microphones you want to record on separate tracks at the same time. Depending on the model, the interfaces described here have two, four or eight built-in microphone preamps; the size of the hall alone doesn’t determine a fixed number.

How do I check my setup before recording?

Set up the microphones you plan to use, record a short, loud run-through, then listen to the individual tracks and the combined result. Check the levels and listen for possible phase problems between close and more distant microphones.

Is an ADAT connection enough to add more microphones?

No. An ADAT input isn’t a built-in microphone preamp. You’ll need suitable external equipment to add microphone channels. Also check the documented channel count at your chosen sample rate.

What should I consider when it comes to extra equipment and faults?

Budget separately for the microphones and cables you need, and for external ADAT preamps if required. In Germany, the Verbraucherzentrale distinguishes between the statutory consumer rights you have against the seller and a voluntary guarantee. Check the terms of any guarantee on offer separately.

Can I record a percussion performance in a community hall without further permission?

You can’t assume blanket permission applies: § 77 UrhG gives performing artists the exclusive right to record their performance on audio media. If the recording also captures other people’s private speech, § 201 StGB may also be relevant. Check the rights involved and the specific recording arrangements at the venue. The fact that the performance is taking place there does not, by itself, mean recording is generally permitted or prohibited.