Who should consider this buying decision?

Percussionists in flats where sound carries

If you want to minimise background noise in your takes while being considerate of your neighbours, microphone placement and recording times are important factors. Permitted playing times also depend on the rules where you live.

Recording with several microphones

If you want to edit percussion signals separately later, compare the number of microphone inputs you can use at once with the USB channels the device actually sends to your computer.

Recording without a laptop running

If you don’t want to use a DAW on your computer while recording, consider a mixer with a built-in recorder that can record individual tracks to a memory card.

What should you look for when recording percussion?

A finished stereo mix over USB

A good fit if: You use a few microphones and set their balance before recording.

The trade-off: You won’t be able to retrieve individual microphone signals from the recorded mix afterwards.

Separate tracks on a computer

A good fit if: You want to edit several microphones individually after recording.

The trade-off: More tracks mean more setup and editing. Also check which inputs provide phantom power.

Individual tracks on an SD card

A good fit if: You want to record without a computer running.

The trade-off: You’ll need to factor in the storage medium, power supply and file transfer afterwards.

What matters What to look for Who it matters to
Noise in your home Test microphone placement and recording times before relying on extra mixer features to solve room-noise problems. If you’re recording percussion and want to minimise disruption to your neighbours, consider recording conditions and playing practice separately. Around 33 % of consumers prioritise quiet takes that are considerate of neighbours.
Separate tracks Count the microphones you need and check the USB recording channels and suitable phantom power on the specific model. If you want to mix several percussion microphones individually later, both the inputs and the separate signals sent to your computer matter. Around 27 % of consumers prioritise separate tracks.
A quick stereo take Check that the inputs, USB signal routing and monitoring path suit the stereo mix you’ve set up in advance. If you set the balance before recording and don’t need individual tracks, a straightforward stereo workflow may be enough. Around 20 % of consumers prioritise this.
Recording without a computer Check whether the device saves individual tracks to a card, and what storage and power supply it needs. If you want to keep your computer switched off while recording, direct recording to a memory card is worth considering. Around 20 % of consumers prioritise this workflow.

Which assumptions should you avoid?

  • Assuming mixer channels are the same as USB tracks

    Having several analogue inputs doesn’t automatically mean that every signal reaches your computer separately. Yamaha lists four Mic/Line inputs on the MG10XU, but 2-in/2-out USB audio. If you need individual tracks, an unsuitable signal path could mean recording the take again or using a different recording device.

    Check the USB recording channels and routing explicitly specified for the exact model.

  • Confusing noise processing with sound insulation

    A mixer won’t change what reaches the microphone or make acoustic percussion inaudible to your neighbours. Shure explains that moving the microphone closer can make the wanted signal stand out more against room reverberation and background noise, although the position can also change the sound.

    Consider recording noise and disturbance to your neighbours separately. Test the microphone position and follow local rules.

  • Assuming all inputs provide phantom power

    For the FLOW 8, Behringer describes switchable phantom power for the first two XLR microphone inputs, not all inputs.

    Before buying, match each microphone to an input that the manufacturer says is suitable for its connection and power requirements.

Brands to consider

Yamaha

The MG10XU is designed as an analogue mixer with USB recording, if two USB input channels are enough for your workflow.

  • Yamaha lists four Mic/Line inputs and 2-in/2-out USB audio.
  • This doesn’t mean that the four microphones are transmitted as four separate USB tracks.

Allen & Heath

The ZEDi-10 is designed for computer-based recording where you want several USB signals to arrive separately.

  • Its technical specifications list four Mic/Line inputs and a 4-in/4-out USB audio interface.
  • Phantom power is switched on for all inputs together, so check that it’s suitable for the microphone types you’ll use at the same time.

Behringer

The FLOW 8 combines a digital mixer with multichannel transmission to a computer for a smaller microphone setup.

  • Behringer lists ten channels transmitted over USB at 24 Bit/48 kHz.
  • According to the manufacturer, two XLR microphone inputs have switchable phantom power; two further combo inputs are intended for dynamic microphones or line signals. Ten USB channels don’t mean ten microphone inputs.

Zoom

The LiveTrak L-8 combines a mixer with built-in SD recording of individual tracks for sessions without a computer running.

  • Zoom lists six microphone preamps, separate SD tracks and four headphone outputs.
  • Podcasting features aren’t automatically an added benefit when recording percussion.

Tascam

The Model 12 combines a mixer, USB interface and SD multitrack recorder for a more extensive recording setup.

  • Tascam lists a 12-track recorder and a 12-in/10-out USB interface.
  • Tascam lists the Model 12 under discontinued products on its downloads page. That alone doesn’t tell you whether a particular retailer has it in stock.

Suitable products at Joybuy

Related products coming soon.

Frequently asked questions

How can I tell whether my percussion microphones will be recorded separately?

Compare the microphone inputs you can use at once with the USB input channels, or with the tracks the specific model saves separately to a card. Yamaha lists four Mic/Line inputs and two USB input channels for the MG10XU; Allen & Heath lists four Mic/Line inputs and 4-in/4-out USB for the ZEDi-10.

How should I start a test recording in a noisy home?

Listen to the planned microphone position through headphones and start by testing different positions and recording times. Shure’s microphone placement guide explains that moving the microphone closer can make the wanted signal stand out more against room reverberation and background noise, although the sound can also change if it’s too close.

What should I plan for when recording to an SD card?

Make sure you have storage that’s compatible with the device and a suitable power supply. During a full test recording, check that the individual tracks you want are saved and can then be transferred. For the LiveTrak L-8, Zoom describes separate SD tracks and battery power as an option.

What should I do if a product develops a fault after purchase in Germany?

In general, statutory rights relating to faulty goods are claims against the seller; these are separate from a voluntary guarantee. The German consumer advice centre describes repair or replacement as forms of bringing the goods into conformity. Any additional cover is subject to the relevant guarantee terms and conditions.

Can I record acoustic percussion in my home at any time?

There’s no single answer, as your tenancy agreement and building rules may also apply, depending on where you live. In Berlin, the environmental authority explains that musical instruments must not cause significant disturbance, and that night-time quiet from 22 to 6, as well as Sundays and public holidays, is particularly protected. These Berlin guidelines are not a uniform rule on playing times across Germany.