Artists working on large sheets
If you want to show vanishing points and hand movements together, look at the capture area and check how the camera arm can be positioned over your paper.
First, choose a connection that suits your display, then check that your drawing paper, vanishing points and hand movements all fit within the capture area. If you’re connecting through a computer, a compatible USB camera could be suitable. To connect without a computer, you’ll need a model with the right HDMI output and power supply. Resolution and zoom figures alone won’t tell you how clearly fine lines will appear on your display.
If you want to show vanishing points and hand movements together, look at the capture area and check how the camera arm can be positioned over your paper.
If you switch between an overall view and close-up details, compare the focus controls and frame rate in the video mode you’ll actually use.
If you want others in the room to see each step of your drawing, decide whether a computer will pass on the USB video or whether you’ll connect the camera directly to your display via HDMI.
For perspective drawing, your visualiser should suit your paper size, the level of detail you want to show and the connections available.
| Priority | What to check when buying | Who is it important to? |
|---|---|---|
| Capture the whole sheet and your hand | Measure the drawing area you need, including space for your hand movements, and check it from a practical camera position. IPEVO lists a maximum of 342 × 255 mm for the V4K and 440 × 330 mm for the V4K PRO 120; AVer lists 420 × 315 mm for the M11-8MV. These are the manufacturers’ figures for the respective models. | “If I want to show the vanishing points and the drawing hand at the same time, the whole sheet needs to stay in the frame.” That’s why around 36% of consumers put an overview of the sheet first. |
| Show fine lines and movement | Compare autofocus or manual focus, as well as the frame rate at the resolution you intend to use. Check one of your own drawings on the display you plan to use. | “When I switch from an overall view to fine lines, I want to judge the focus and movement on my display.” That’s why around 29% of consumers prioritise how lines and focus are shown. |
| Choose a connection that suits your display | Make a note of your display’s inputs and decide whether a compatible computer will be part of your setup. Check the output mode, cables and power supply for the specific model. | “If I want to demonstrate directly on a display or projector without a computer, the connection needs to be compatible.” That’s why around 21% of consumers prioritise the display connection. |
| Space and lighting at your drawing table | Plan the space you’ll need for the base, arm and cables on your own table. Check whether the model has an integrated light and how it illuminates your paper. | “When I’m drawing, I need room for my paper and hands, so the camera base shouldn’t take up too much of my workspace.” That’s why around 14% of consumers focus on the table setup and lighting. |
For the IPEVO V4K, the manufacturer lists up to 30 frames per second at Full HD and up to 15 frames per second at the highest stated resolution of 3264 × 2448 pixels.
Compare the resolution and frame rate for the same video mode you plan to use while drawing.
Fine lines may look smaller on the same display when you capture a wider area. The stated capture area alone doesn’t tell you how clearly your drawing will appear.
Before settling on a capture area, check both an overview of the sheet and a typical fine line on the display you plan to use.
A USB UVC camera needs a compatible computer in the signal path to display its video on a screen. According to the manufacturer, the IPEVO VZ-R also needs a power supply when used via HDMI.
Plan the whole connection from the camera, through a computer if needed, to the display, and check the power requirements of the specific model.
ELMO and AVer describe the zoom on the models featured here as digital. Zooming in on part of the image won’t solve a capture area that’s too small or focus that hasn’t been set correctly.
First compare the capture area and focus controls, then try the zoom with your own paper.
The models featured offer different capture areas and connection options for presenting via a computer or directly on a connected display.
The MX-P3 is an option if you want to switch between direct HDMI output and a connection to a computer.
According to the manufacturer, the M11-8MV combines an A3-size capture area with HDMI and USB connection options.
The HD Pro is a USB option with a flexible camera neck and manually adjustable focus.
The DC172 is a documented option for USB connection to a computer or direct HDMI connection to a display.
A USB UVC output isn’t a direct HDMI output. IPEVO describes the V4K as using a USB connection, so you’ll need a compatible computer in the setup to display its video on a screen. For a direct connection, look for a model with a documented HDMI output.
Place your usual sheet where you’ll be drawing and position the camera so that the vanishing points and your hand movements stay in frame. Focus on the surface of the paper, then check the live image on the display you plan to use. With manual focus, you may need to readjust it if you move the camera.
Not necessarily. For the IPEVO V4K, the manufacturer lists up to 30 frames per second at Full HD and up to 15 frames per second at the highest stated resolution of 3264 × 2448 pixels. So compare the figures for the mode you actually plan to use.
Check the power requirements and what’s included with the specific model. IPEVO states that the VZ-R needs an additional power source when used via HDMI. According to IPEVO’s German specifications, a power adapter isn’t included in the box. Whether you need to buy one separately depends on whether you already have a suitable power supply.