What should you look for when buying?
First decide what size proof you need. Then make sure the colour workflow, print volume and space to operate the printer fit the way you teach.
| What to consider |
What to look for |
Who needs to think about this most? |
| Colour reproduction |
Check which profiles and papers are suitable for the specific model, then test a section of an image on the paper you plan to use. Canon Germany recommends a calibrated monitor and colour management for a controlled comparison. |
If you want to compare colours and paper finishes before the exhibition, you’ll need a consistent proofing workflow. Around 36% of consumers put colour checking first. |
| Repeated prints |
Compare ink and paper costs for the same format, and allow for test prints and mistakes. Manufacturers’ stated yields are based on specific conditions and don’t represent the cost of every exhibition. |
If you expect lots of proofing rounds, you’ll want to budget for ink, paper and format together. Around 29% of consumers prioritise repeat printing. |
| Format and space |
Decide on the largest format you need, and measure the paper feed, output area and access needed to operate the printer. The Canon PIXMA G650 prints photos up to A4, while the Epson EcoTank ET-8550 supports A3+. |
If your proof needs to show how the final exhibition piece will look, the paper format and the space available need to work together. Around 21% of consumers prioritise format and space. |
| Sharing the printer |
Check the specific model’s connections, paper access and placement guidance. Noise and emissions may also be worth considering in indoor spaces. |
If several people will use the printer, you’ll need easy-to-access paper paths and enough room to operate it. Around 14% of consumers prioritise shared use. |
Products to consider on Joybuy
Related products coming soon.
Frequently asked questions
Is an A4 photo printer enough for exhibition proofs?
A4 may be enough if you’re only comparing smaller versions. If you want the proof to show how a larger final print will look, the printer needs to support that paper size: the Canon PIXMA G650 prints photos up to A4, while the Epson EcoTank ET-8550 supports A3+. These format details are from Canon Germany and Epson Germany.
How do I set up a colour proof?
Choose your paper, then select compatible print settings or an appropriate ICC profile. Canon Germany recommends a calibrated monitor and a physical proof for a controlled comparison, viewed under suitable conditions. Check which features your specific model supports.
How much does it cost to run, and what happens if it breaks?
As well as the printer, budget for compatible ink, photo paper and test prints. Manufacturer yield figures alone won’t determine your costs. The Consumer Advice Centre distinguishes between statutory rights and a voluntary guarantee. When you buy, check who your contractual partner is and what additional guarantee terms apply.
What labelling should I check on a Wi-Fi printer?
The Federal Network Agency checks factors including the CE marking, product and manufacturer details, instructions in German and a declaration of conformity as part of its market surveillance. According to the European Union, the CE marking means the manufacturer declares that the product complies with the relevant product regulations. It isn’t an individual quality mark for photo prints.
Can I exhibit proofs that show identifiable people?
If people can be identified, you’ll need to check the legal basis for taking and using the images. The specific way you plan to exhibit them also matters. The State Commissioner for Data Protection and Freedom of Information of Rhineland-Palatinate explains that photographs of people generally require consent or another valid legal basis. Whether a particular image may be exhibited depends on the image, its purpose and the relevant authority.