Choose a photo printer based on the largest image size you need and the paper you actually plan to use. For consistent A3+ and fine art prints, look for a suitable pigment printer; dye-based printers are another option for compatible photo papers. If you’re printing lots of photos, factor in consumables and maintenance. Dye-sublimation printers are designed for postcards and smaller print runs, but they won’t replace an A3+ exhibition print. In a shared studio, you’ll also need an agreed workflow for paper, colour profiles and print settings.
Which printing option is right for you?
For exhibition prints
If you want to display large railway images on selected photo or fine art paper, consider the print size, paper feed and colour workflow you need. Canon Academy explains the differences between pigment inks for coated photo and uncoated fine art papers, and dye-based inks for coated photo papers.
For teams printing lots of photos
If you regularly produce multiple prints or variations, plan for paper, ink and maintenance supplies together. Epson states that the ET-18100 can print up to 2,100 colour photos per ink set in 10 × 15 cm format; this figure doesn’t apply to A3+ prints.
For postcard prints
If you mainly need small prints rather than large exhibition images in a shared workspace, a compact printing option could suit you. Canon lists the SELPHY CP1500 as supporting postcard size 100 × 148 mm, while DNP Photo Imaging lists media up to 15 × 20 cm for the DS-RX1HS.
What should you look for when choosing?
A3+ pigment printing
A good fit if: you want to prepare and exhibit larger railway images on suitable photo or fine art paper.
What to consider: Paper choice, profiles, ink and maintenance all need to work together. Epson notes that the SC-P700 uses ink during setup and that its maintenance kit has a limited lifespan.
A3+ dye-based printing
A good fit if: you mainly print colour railway photos on compatible photo paper, particularly coated paper.
What to consider: A3+ support doesn’t mean every fine art paper is suitable. For fine art paper, Canon recommends a 25 mm margin at both the top and bottom when using the PIXMA PRO-200S.
Refillable photo printing
A good fit if: you regularly print lots of photos and prefer ink bottles to cartridges. Epson describes the ET-18100 as an A3+ photo printer with six colours and refillable tanks.
What to consider: Epson’s figure of up to 2,100 photos per ink set is based on 10 × 15 cm prints. You’ll need to budget separately for larger formats, misprints and maintenance.
Dye-sublimation for small formats
A good fit if: you mainly want to produce postcard prints or smaller batches. Canon lists the SELPHY CP1500 as supporting 100 × 148 mm, while DNP lists media up to 15 × 20 cm for the DS-RX1HS.
What to consider: These printers won’t replace an A3+ exhibition printer. The SELPHY needs compatible paper and an ink ribbon as a set. The speed quoted by DNP for the DS-RX1HS applies to a specifically described high-speed mode.
| What matters |
What to check before buying |
Who should consider it? |
| Format and paper |
Check the largest size you plan to print, as well as the paper feed and margin requirements for the specific paper. |
If you want to display a large railway image on selected photo or fine art paper, the right media feed is especially important. Around 36% of consumers put print size first. |
| Consistent colours |
Set an ICC profile and shared media settings for the printer-and-paper combination. Canon also recommends using a calibrated monitor. |
If several people use the same printer, a shared profile and consistent settings help keep different versions comparable. Around 29% of consumers prioritise repeatable colour. |
| Consumables |
Compare paper, ink or ribbon, and maintenance supplies for the format you plan to print. Only use yield figures for the specific format they refer to. |
If you regularly produce multiple prints, remember to factor in ongoing supplies and maintenance. Around 21% of consumers put running costs first. |
| Small prints |
Check the print size you need, compatible paper and ribbon sets, and the space required for output. |
If you mainly need small prints in a shared studio with limited space, the output format is key. Around 14% of consumers prioritise small prints. |
Common buying mistakes
-
Assuming a yield figure for 10 × 15 cm also applies to A3+
Epson’s figure of up to 2,100 photos per ink set for the ET-18100 is based on 10 × 15 cm prints. The SC-P700’s maintenance kit also has a limited lifespan.
Compare usage for the same planned format and paper, and allow for test prints and maintenance supplies.
-
Assuming A3+ support means you can use any paper
With the Canon PIXMA PRO-200S, suitable media depend on the feed used. For fine art paper, Canon recommends a 25 mm margin at both the top and bottom.
Check the specific paper against the information for the full printer model, paper feed and margin requirements.
-
Planning to use small dye-sublimation prints for exhibitions
Canon lists the SELPHY CP1500 as supporting 100 × 148 mm, while the media listed by DNP for the DS-RX1HS goes up to 15 × 20 cm. Neither option is suitable for A3+ prints.
Decide on the largest finished size you need before buying, then choose your printer accordingly.
Key brands at a glance
Canon
Canon offers printers for different photo formats and printing methods, from A3+ inkjet printing to postcard prints.
- According to Canon, the imagePROGRAF PRO-310 features ten pigment inks, plus LAN and Wi-Fi; the PIXMA PRO-200S uses eight dye-based inks.
- With the PRO-200S, check the paper feed and fine art margins for the specific media. For the SELPHY CP1500, consider the format and the paper-and-ribbon sets required.
Epson
Epson’s range includes the SC-P700, a photo and art printer with pigment inks and different media paths, and the ET-18100, a refillable A3+ photo printer.
- The models cater for different paper feed requirements and repeated photo printing.
- Epson notes that the SC-P700 uses ink during setup and that its maintenance kit has a limited lifespan. The stated yield for the ET-18100 is based on 10 × 15 cm photos.
DNP Photo Imaging
DNP positions the DS-RX1HS for professional workflows involving batches of smaller photo formats.
- DNP lists media in 10 × 15 cm, 13 × 18 cm and 15 × 20 cm formats, as well as driver and ICC profile options.
- The listed media sizes don’t go up to A3+. Speed figures apply under the stated conditions for high-speed mode.
Suitable products on Joybuy
Related products will be available soon.
Frequently asked questions
How can you avoid colour differences between workstations?
Set a suitable ICC profile and shared media settings for the printer-and-paper combination you’re using, then compare a test print under suitable lighting. Canon also recommends a calibrated monitor, but this doesn’t guarantee an exact match between the screen and a reflective paper print.
Can the SELPHY CP1500 print without the right paper and ink ribbon?
No. The SELPHY CP1500 requires compatible paper and an ink ribbon as a set. Separate cassettes may be needed for other small formats, so check the format you need and exactly what’s included before buying.
Who is responsible for the statutory warranty if a printer is faulty?
When a consumer buys from a trader, their statutory rights are against the seller and are separate from any voluntary guarantee. The Verbraucherzentrale states that new goods are generally covered for two years. Whether the studio is buying as a consumer or as part of a business activity determines which consumer purchase rules apply.
Can railway photos be taken on Deutsche Bahn property and then exhibited or sold?
Under Deutsche Bahn’s rules, private photography is permitted without authorisation in areas open to the general public. For non-journalistic commercial photography on DB property, DB requires advance notification and written permission. This doesn’t automatically settle the rights to every existing image. If people are identifiable, you should also check section 22 of the German Art Copyright Act (KunstUrhG), along with the exceptions and limitations in section 23, before distributing or publicly displaying the images.