Students printing A3+ exhibition work
Check your final print size and intended paper against the feed options supported by your model. Canon Germany and Epson Germany list different formats and paper feeds for their printers.
For A3+ exhibition prints, you need a printer that genuinely supports the size and paper you want to use. According to Canon Germany, the compact Canon SELPHY CP1500 is designed for smaller formats such as 100 × 148 mm. If A4 is enough and you print lots of proofs, a refillable tank system could be a good fit. For fine art paper, however, the right feed, margin settings and colour workflow are what matter. If you only need a few final prints, you could also use a professional print service, especially if you don’t have space for a suitable printer or won’t be printing regularly.
Check your final print size and intended paper against the feed options supported by your model. Canon Germany and Epson Germany list different formats and paper feeds for their printers.
If you regularly make adjustments and reprint, compare tank and cartridge systems, paper requirements and the conditions behind any quoted page yields. Canon Germany and Epson Germany each use their own reference formats for these figures.
Before buying, check that you have enough room not only for the printer, but also to load and collect the paper. Epson Germany describes the XP-15000 as a compact A3+ photo printer, but you’ll still need to make sure its paper feed fits your flat.
Decide on your final print size and paper before comparing models. Then you can check the ink type, consumables and space requirements against your needs.
| Priority | What to check before buying | Who it matters to |
|---|---|---|
| Print size and paper | Check the image size, paper type, borderless printing option and intended feed together. For fine art paper, Canon Germany recommends leaving a 25 mm margin at both the top and bottom when using the PIXMA PRO-200S. | If I want my finished print to be A3+, I’ll first check that the printer and paper feed support that size. Around 33% of consumers put print size and paper first. |
| Colour and print workflow | Check for suitable ICC profiles and media settings for the exact printer-and-paper combination you plan to use. Hahnemühle warns that changing the driver or firmware can cause colour shifts. | If accurate colour on my exhibition paper matters to me, I’ll plan a test print using the right settings. Around 27% of consumers prioritise colour and paper matching. |
| Consumables | Compare your planned print volume, format and paper on a like-for-like basis. Canon Germany bases the G650’s yield on 10 × 15 cm photos; Epson Germany quotes up to 2,300 photos per set of bottles for the ET-8550, not a fixed number of your own A3+ prints. | If I expect to make several rounds of corrections, I’ll factor in ink, paper and any maintenance supplies for my chosen formats. Around 20% of consumers put ongoing printing costs first. |
| Space and paper feed | Measure the space available and allow for where the chosen paper will be loaded and collected. A compact body alone doesn’t tell you how much room you’ll need while printing. | If space is tight in my student flat, I need a printer whose paper feeds will actually work there. Around 20% of consumers prioritise space and paper feed. |
A printer designed for postcards or smaller specialist formats won’t produce an A4 or A3+ exhibition print.
Before you start looking at models, note down the actual finished size of your prints and check it against the formats supported.
Canon’s figure for the G650 is based on 10 × 15 cm photos; Epson’s figure for the ET-8550 is not a fixed yield for your own A3+ images.
Only compare consumption figures when the format, paper and usage are comparable.
Supported media, paper feeds and recommended margins can vary depending on the paper and model.
Check the paper and intended feed together, and allow for any required margins when you lay out your image.
A review of the Canon imagePROGRAF PRO-300 doesn’t tell you what the PRO-310 is like. Canon Germany lists the PRO-300 as discontinued.
Check the full model name and make sure a review actually covers the model you’re considering.
The Canon models mentioned range from the small SELPHY CP1500 and the A4 tank printer PIXMA G650 to A3+ photo printers such as the PIXMA PRO-200S and imagePROGRAF PRO-310.
Epson Germany lists the XP-15000 as an A3+ photo printer, the ET-8550 as a refillable A3+ model, and the SC-P700 as a photo and art printer with a fine art paper feed.
The HP ENVY Inspire 7920e could be an option if you want to scan and copy as well as print smaller photos.
Print a small test on the paper you plan to use. If a suitable ICC profile is available, use the corresponding media settings. Hahnemühle warns that changing the driver or firmware can cause colour shifts. A profile won’t guarantee that the print looks identical on screen and on paper.
No. The supported media and paper feeds depend on the model and the paper. For fine art paper, Canon Germany recommends leaving a 25 mm margin at both the top and bottom when using the PIXMA PRO-200S. So check the specifications for your exact printer-and-paper combination.
Allow for the right ink, your chosen paper and, if you’re using a SELPHY printer, the corresponding paper-and-ink cassette set. Epson Germany also notes that the SC-P700 uses ink during initial set-up and that its maintenance kit has a limited lifespan.
It depends on the final print size you need. The Canon SELPHY CP1500 supports postcard size, including 100 × 148 mm, making it suitable for small proofs rather than A4 or A3+ exhibition prints. Check the supported formats for the specific model before buying.
Not simply because your printer can print the file. Section 15 of the German Copyright Act lists reproduction and exhibition rights among the author’s exclusive rights. For other people’s images, check the necessary usage rights and whether any legal exceptions apply to your specific circumstances.