If you don’t already own photography lights and want to take consistent, full-view shots time after time, a kit with two lights, softboxes and stands is a sensible starting point. If you have a compatible light head, a single modifier may be enough. For a full-view shot, the Canadian Conservation Institute recommends placing two light sources at the sides, at an angle of around 45 degrees, to achieve even illumination. Check the paper’s whites, the charcoal tones and the surface texture you want in a test shot, as a separate raking-light shot will reveal different details from a full-view shot.
Which solution is right for you?
Artists without photography lights
You want to photograph your charcoal drawings in full and get consistent results, but still need to put together your lights, modifiers and stands. NEEWER Deutschland lists two softboxes, LED lights and stands as part of the NK103 kit.
Photographers who already own a light head
You already have studio lighting and mainly need to make sure the connection and modifier are compatible. Godox and amaran describe rectangular softboxes with a Bowens mount for lights equipped with the corresponding connection.
Those documenting surface texture
As well as an evenly lit full-view shot, you may need a separate image that shows the paper’s texture or any damage. The Canadian Conservation Institute describes raking light as a way to bring out these details.
What should you look for when buying?
First, decide whether you need a complete lighting setup or already have a compatible light head. Also consider whether you only need an evenly lit full-view shot or want to capture the texture of the paper and charcoal as well.
Complete kit with two lights
Best for: You don’t yet have studio lighting and want to take full-view shots regularly.
Consider: Two stands take up space. Keeping the lights at equal distances and taking a test shot will help you assess the illumination for your particular drawing.
Single lighting modifier
Best for: You already have a light head with a confirmed compatible connection and a safe setup.
Consider: For an evenly lit full-view shot, a single light source may require extra positioning, a second light source or a reflector.
Separate raking-light shot
Best for: You want to document the paper’s texture, ripples or damage as well as take a full-view shot.
Consider: Side-on raking light brings out texture, but doesn’t replace an evenly lit shot for assessing tonal values.
| Buying criterion |
What to check before buying |
Who it matters most to |
| Even illumination |
Compare the centre and corners of a test shot. Check whether you can position two light sources at a similar distance and angle. |
If I want to photograph the whole sheet with consistent tonal values, I check the centre and corners in a test shot. Around 36 % of consumers put an evenly lit full-view shot first. |
| Complete kit contents |
Check how many lights, softboxes, holders and stands are included in the specific offer. Find out whether your setup is designed for one or two lighting positions. |
If I don’t already own photography lights, I want to know whether the lights, softboxes and stands are all included. Around 29 % of consumers prioritise a complete starter kit. |
| Compatibility |
Compare the exact connection type of the light head and softbox, along with the manufacturer’s guidance on compatible lights. Check what kind of stand setup you’ll need, too. |
If I already own a light head, I check its connection and the recommended combination before choosing a modifier. Around 21 % of consumers prioritise compatibility with the light they already own. |
| Tonal values and texture |
Compare a test shot with the original and keep the white balance consistent throughout a series of images. If you want to show texture, you can also take a separate shot using side-on raking light. |
If I need to capture the paper’s texture as well as the charcoal tones, I need separate shots rather than one lighting setup for both. Around 14 % of consumers prioritise documenting tonal values and texture. |
Common misconceptions
-
Assuming a single lighting modifier is a complete lighting kit
A softbox isn’t automatically a ready-to-use continuous lighting kit. The lighting-modifier components listed by amaran differ from the NEEWER Deutschland NK103 offer, which also includes LED lights and stands.
Check the quantity and contents of the specific offer against the equipment you already own.
-
Assuming a large or soft light source guarantees neutral documentation
How the whole sheet is lit and the camera’s white balance both affect the result. The Canadian Conservation Institute describes even illumination and raking light as serving different purposes.
Check the centre and corners in a test shot, compare the paper’s white with the original, and check the white balance.
-
Assuming Bowens or a similar size description guarantees compatibility
Godox, amaran and SmallRig specify mounts for particular softbox models. That information alone doesn’t prove that the modifier will fit every light you own.
Before buying, check the full model names, connection type and the manufacturer’s guidance on compatibility.
Relevant brands at a glance
NEEWER
The NK103 is a kit for anyone looking to put together lights, softboxes and stands in one purchase. NEEWER Deutschland lists two 60 × 60 cm softboxes, two bi-colour LED lights and two stands as included components.
- The listed kit contents include components for two lighting positions.
- The two stands need space. The product information doesn’t confirm that the lighting will be even for every drawing size.
Godox
According to Godox, the SB-FW6090 is a 60 × 90 cm rectangular softbox with a Bowens mount, suitable for a compatible light head.
- The connection type and dimensions are specified for this model.
- Check that your light head uses this mount and that you have a light source and stand for your setup.
amaran
According to amaran, the Light Box 60x90 is a rectangular Bowens lighting modifier. The manufacturer lists diffusion material, an inner baffle, a grid and a carry bag as included.
- amaran states that it’s compatible with Bowens lights up to 600 W.
- Check your specific light head and setup; the listed contents don’t include a light head.
SmallRig
According to SmallRig, the RA-R6090 is a 60 × 90 cm rectangular softbox with a Bowens mount. The manufacturer also lists quick set-up and a grid as features.
- Quick set-up and a grid are listed as features of this model.
- The compatible light head and setup need to work with the equipment you already have.
Suitable products on Joybuy
Similar products coming soon.
Frequently asked questions
How should I position the lights for an evenly lit full-view shot?
Position two light sources at the sides of the drawing, at an angle of around 45 degrees. The Canadian Conservation Institute recommends this arrangement for even illumination. Check the result with your actual sheet size and a test shot.
How can I also show the texture of the paper or charcoal?
As well as your full-view shot, take a separate image using low, side-on light. The Canadian Conservation Institute describes raking light as a way to bring out texture and damage; it doesn’t replace an evenly lit shot for assessing tonal values.
Will a softbox automatically make white paper look neutral white?
No. The camera’s white balance also affects how white paper looks in a photo. Canon Europe explains why white balance matters in challenging lighting conditions. Compare a test shot with the original and keep the setting consistent throughout a series of images.
When is a single lighting modifier enough instead of a complete kit?
A single modifier may be enough if you already have a light head with a compatible connection and a safe setup. Check what’s included in the specific offer. For an evenly lit full-view shot, a single light source may also require extra positioning or another light source.
How can I check whether a Bowens softbox is compatible with my light?
Compare the exact connection type of the light head with that of the softbox model, and follow the manufacturer’s guidance on compatible combinations. For the amaran Light Box 60x90, the manufacturer states that it’s compatible with Bowens lights up to 600 W. Also check that you have a light head and stand for your setup.