Which signal path is right for you?

Acoustic piano with stereo microphones

If you want to record two microphone tracks, check that both preamps can be used at the same time and whether your microphones need phantom power. Shure outlines different microphone positions for piano recording, so remember to plan where you’ll place them in the booth, too.

Digital piano with a direct signal

If you want to capture the piano’s output rather than the sound of the room, check the audio outputs on your specific instrument. Yamaha explains how to connect analogue outputs to line inputs; a suitable stereo signal path needs two channels.

If you’re planning to expand later

If you may want to record more separate microphone tracks in future, distinguish between built-in microphone preamps and digital expansion inputs. According to Audient, the iD14 MKII has two built-in microphone preamps and an optical ADAT input; additional microphone inputs require suitable external hardware.

What should you look for?

Acoustic piano with microphones

A good fit if: you want to capture the sound of the piano in the room using two separate microphone tracks.

The trade-off: Two inputs are enough for this microphone setup, but not for additional separate microphone tracks at the same time. Microphone placement and the sound of the booth still need to be considered separately.

Digital piano via audio outputs

A good fit if: you want to record the audio signal directly from your digital piano.

The trade-off: The right inputs depend on the audio outputs on your specific instrument. A USB port alone doesn’t confirm that the piano sends audio rather than MIDI only.

Your needs What to check before buying Who it matters most to
Two microphones at once Check for two microphone preamps that can be used at the same time, and for the phantom power you need. According to the manufacturers, 48 V affects both inputs on the 4th-generation Scarlett 2i2, while 48 V can be switched on separately for each input on the MOTU M2. If you want to record an acoustic piano using two separate microphone tracks, you need to be able to connect both signals at once; around 34% of consumers prioritise recording with two microphones.
Connecting a digital piano Check the manual for your specific instrument to confirm its audio outputs and USB audio capabilities. For a stereo output, plan for two suitable line inputs; Yamaha explains how to connect analogue outputs to line inputs. If you want to record the sound of your digital piano directly, the signal path needs to suit its actual audio outputs; around 22% of consumers prioritise a direct signal.
Sound in the booth Assess your planned microphone position with a short test recording. Shure outlines different microphone positions, while Neumann highlights the effect of room acoustics on recordings. If you’re recording with microphones in a small booth, you’ll want to hear how the position and room shape the piano’s sound; around 22% of consumers focus on the sound of the booth.
Levels and monitoring Check the level display, direct monitoring controls and headphone socket. According to the manufacturer, the MOTU M2 display shows input and output levels; Focusrite documents direct monitoring modes for the 4th-generation Scarlett 2i2. If you’re recording a performance from start to finish, you’ll want to be able to monitor input levels and your listening path; around 11% of consumers prioritise this control while recording.
Expanding your channels later Distinguish built-in microphone inputs from digital expansion inputs. According to the manufacturer, the Audient iD14 MKII has two built-in microphone preamps; its optical ADAT input requires suitable external hardware for additional microphones. If you want to record more separate microphone tracks later, you’ll need to plan for expansion and extra hardware; around 11% of consumers put this upgrade option first.

Avoid common misconceptions

  • Counting sockets that share an input

    On the 4th-generation Focusrite Scarlett 2i2, connecting a jack to the front disables the corresponding rear XLR microphone input. So the connections don’t give you four inputs that can all be used at once.

    Check how many channels you can use at the same time, and whether you want to connect microphone or line-level signals.

  • Assuming a higher bit depth prevents clipping or improves room sound

    The UR22C manual describes support for a 32-bit integer format under the stated driver conditions. This says nothing about the sound of the booth or whether a recording can clip.

    Check the actual signal path and listen to a test recording rather than comparing bit depth alone.

  • Confusing ADAT channels with built-in microphone inputs

    The Audient iD14 MKII has two built-in microphone preamps as well as an optical ADAT input. The ADAT input isn’t an additional built-in microphone connection.

    Plan how many microphones you’ll need to use at the same time and what external hardware you’ll need before factoring in an expansion.

    Suitable external expansion hardware may be needed for additional analogue microphones.

Key brands at a glance

Focusrite

According to Focusrite, the 4th-generation Scarlett 2i2 has two microphone inputs, making it an option for recording two microphone tracks.

  • Focusrite documents direct monitoring modes and input level meters.
  • A front jack disables the corresponding rear XLR input; 48 V is switched on for both microphone inputs at once.

MOTU

According to MOTU, the M2 has two combination microphone/line inputs and a display for metering.

  • Each of the two inputs has its own gain and 48 V controls.
  • There are still only two analogue input channels; check that your recording computer meets the system requirements.

Steinberg

The UR22C is a two-channel option with two built-in microphone preamps and additional MIDI connections.

  • Monitor mix and MIDI In/Out add to the connection options.
  • Two analogue inputs limit the number of sources you can record separately at the same time. The manual describes 32-bit integer support under certain driver conditions, not automatic 32-bit float support.

Audient

According to Audient, the iD14 MKII has two microphone preamps and an optical ADAT input for potential expansion.

  • With suitable external hardware, ADAT can provide additional channels.
  • Without that hardware, the ADAT input doesn’t provide extra analogue microphone inputs.

Solid State Logic

According to the manufacturer, the SSL 2 MKII has two microphone preamps and two headphone outputs.

  • Two headphone outputs can be useful when more than one person needs to listen.
  • The number of headphone sockets alone doesn’t mean you get two independent headphone mixes or more than two recording channels.

Products to suit your needs on Joybuy

Related products coming soon.

Frequently asked questions

Do I always need two microphones for an acoustic piano?

No, using two microphones is a creative choice. Shure describes different microphone positions for piano recording; you only need two microphone inputs if you actually want to record two signals separately.

Can I simply record my digital piano via USB instead of using an interface?

Only if your specific instrument sends audio over USB. Roland describes a direct USB connection for MIDI with the FP-90, and an audio interface for its audio signal. So check the audio and USB specifications for your piano model.

How should I prepare for my first take in a small booth?

Set up your planned microphone position, record a short test and listen back to the room sound and levels. This will help you decide whether the signal path and position work for your recording.

What should I plan for future ADAT expansion?

Check how many additional channels you want to record at the same time and what external hardware you’ll need. The Audient iD14 MKII has two built-in microphone preamps; its optical ADAT input is an expansion option, not an additional built-in microphone connection.

Does the CE marking automatically apply to every audio interface?

Not across the board: the European Commission explains that CE marking is required only for products covered by relevant harmonised EU rules that explicitly require it. The requirements for a specific product depend on the rules that apply.