For mixing piano in a quiet home office without a microphone running, open-back studio headphones are a natural choice. Sound On Sound points out that sound can leak out and be picked up by microphones in the room. If you’re monitoring while recording, or background noise is distracting, closed-back headphones are a better option. HIFI.DE describes the DT 900 PRO X it tested as fairly neutral, but criticises the strong bass emphasis of the DT 700 PRO X it tested. These assessments apply to the specific models and don’t replace checking the fit and connection for yourself.
Who are the different designs suited to?
Piano mixers in a quiet room
If you mainly judge finished recordings by their tonal balance, transients and stereo image, and there’s no microphone running at your desk, open-back headphones could be a good fit. Their manufacturers position the open-back DT 900 PRO X and HD 490 PRO for mixing. Just bear in mind that they offer less isolation.
Recording at a shared desk
If you monitor while recording or share your room with others, sound from open-back headphones may be disruptive. Sound On Sound points out that it can also be picked up by microphones in the room. Closed-back headphones are likely to be a better choice in this situation, but that doesn’t automatically mean their sound is better suited to your mix.
Mixing during long sessions
If you work for long stretches, fit, ear pads and cable routing matter just as much as the sound. Sennheiser says the HD 490 PRO comes with two pairs of ear pads and a cable that can be connected on either the left or right. Even so, you’ll need to decide for yourself whether they fit comfortably.
What should you look for when buying?
Open-back studio headphones
A better fit if: you mainly mix in a quiet environment and don’t have a microphone running at the same time.
Bear in mind: sound can leak out, while background noise can reach your ears more easily.
Closed-back studio headphones
A better fit if: you monitor during a microphone recording or want to hear less background noise.
Bear in mind: isolation alone doesn’t tell you whether the sound is right for your mix.
First, consider whether a microphone will be running while you listen and how quiet your workspace is. Then compare the sound of the specific model and check that its fit and connection suit the way you work.
| What matters when buying |
What to look for |
Who should pay particular attention |
| Tonal balance and stereo image |
Check assessments of the specific model and compare familiar recordings at the same listening level. |
When I’m judging piano tone, transients and stereo placement, sound is my main priority. Around 36% of consumers are likely to consider sound quality their top concern. |
| Isolation and sound leakage |
Consider your recording set-up and the noise in the room; assess the sound of a closed-back model separately. |
If a microphone is running during recording or other people are working in the room, I want less sound leakage. Around 29% of consumers are likely to put isolation first. |
| Comfort during long sessions |
Check the fit with your usual glasses and working position, and consider whether suitable replacement ear pads are available. |
When I’m planning long mixing sessions, I want to know whether the fit and ear pads will work for me. Around 21% of consumers are likely to place the greatest importance on long-term comfort. |
| Connection and usability |
Check your device’s socket and output specifications against the plug, adapter and details for the specific headphone model. |
If I want to use the headphones with my existing audio output, a compatible connection matters to me. Around 14% of consumers are likely to prioritise connectivity and long-term usability. |
Common buying misconceptions
-
Assuming open-back headphones have a neutral sound
The design affects sound leakage, but it doesn’t tell you on its own how a particular pair of headphones sounds. HIFI.DE describes the DT 900 PRO X it tested as fairly neutral, but that’s not a verdict on every open-back model.
Start by choosing headphones that suit your recording set-up and room. Then assess the sound of the exact model using familiar comparison material.
-
Assuming isolation alone makes headphones suitable for mixing
In its individual reviews, HIFI.DE criticises the strong bass emphasis of both the DT 700 PRO X and the ATH-M50x. This may matter when making decisions about the lower end of the piano’s range.
If you use closed-back headphones for recording and mixing, double-check decisions about bass with familiar comparison material.
-
Focusing only on impedance or plug size
A compatible plug or a particular nominal impedance doesn’t, by itself, tell you what listening level you can achieve from your specific audio output.
Check the socket, output specifications and sensitivity of the exact model, and see whether any adapter you need is included.
Key brands to consider
beyerdynamic
The open-back DT 900 PRO X is intended for mixing in a quiet workspace, while the manufacturer positions the closed-back DT 700 PRO X for recording, monitoring and mixing.
- The manufacturer gives both models a nominal impedance of 48 Ohm and says they have detachable cables.
- HIFI.DE describes the DT 900 PRO X it tested as fairly neutral, but criticises the strong bass emphasis of the DT 700 PRO X it tested. These test results relate to the specific models.
Sennheiser
The open-back HD 490 PRO is an option for mixing in a quiet workspace.
- The manufacturer says it comes with two pairs of ear pads for producing and mixing. The pads are replaceable, and the cable can be connected on either the left or right.
- The open-back design offers less isolation than a closed-back model. The manufacturer’s claims about sound accuracy aren’t independent comparative measurements.
AKG
According to the German manufacturer website, the open-back K702 is intended for mixing and mastering, and may suit quiet listening spaces.
- AKG lists a detachable mini-XLR cable, replaceable ear pads and a nominal impedance of 62 Ohm.
- Because of sound leakage, the open-back design is worth bearing in mind if you monitor while recording with a microphone. Claims about accuracy and comfort come from the manufacturer.
Audio-Technica
The closed-back ATH-M50x is a monitoring option if you need passive isolation and a choice of cables.
- The manufacturer lists passive isolation and three detachable cables.
- In its review, HIFI.DE criticises the strong bass emphasis, high clamping force and ear cups, which some people may find too small. This limits its suitability as your only reference for mixing piano.
Neumann
The open-back NDH 30 is designed for editing, mixing and mastering according to the manufacturer, making it another option for quiet mixing spaces.
- Neumann describes the sound reproduction as linear and the stereo image as precise; these are the manufacturer’s claims.
- The open-back design lets sound leak out, so bear this in mind if you monitor while recording with a microphone.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I use open-back headphones while recording my piano with a microphone?
If the microphone is running at the same time, bear in mind that sound can leak out of the headphones and be heard in the recording room. That’s why closed-back headphones are generally a better choice for monitoring while recording. You can assess open-back headphones separately for mixing later in a quiet space.
Do I need an adapter to connect the headphones to my audio interface?
That depends on the audio interface’s socket and what’s included with the specific product. beyerdynamic lists a 3.5-mm plug and a 6.35-mm adapter for the DT 900 PRO X and DT 700 PRO X. Also check your interface’s output specifications.
How should I manage the volume during long mixing sessions?
Keep the volume low and take regular listening breaks. The World Health Organization points out that volume, duration and frequency of exposure all affect the risk of hearing damage. A maximum headphone volume specified by the manufacturer isn’t a target level for mixing.
What rights apply when buying online from a business seller?
For eligible distance purchases in the EU, you generally have a 14-day right to withdraw from the contract, starting when you receive the goods. Exceptions provided for by law and any return postage costs should be checked separately. If goods are faulty, you also have statutory consumer rights against the seller, with a minimum period of two years. These are separate from any voluntary manufacturer’s guarantee. This information comes from Your Europe, the European Union’s information portal.