Which microphone is right for you?

Solo speakers in a noisy room

If you record intros on your own and can speak close to the microphone, the most important thing is to test it in the place where you’ll actually record. That way, you can hear how much room sound and everyday noise it picks up. Audio-Technica and Samson both highlight positioning and speaking distance as important factors when choosing a microphone.

Solo podcasters with a simple setup

If you want to record directly on your computer and monitor your voice as you speak, USB can make connecting easier. Audio-Technica describes USB as a way to record on a computer without a separate audio interface. Check the specific model for a headphone output and easy-to-use controls.

Podcasters planning to upgrade

If you already have an audio interface or are planning an analogue signal chain, pay close attention to the XLR connection and preamp requirements. Samson explains the signal conversion you’ll need, while RØDE distinguishes between the USB and XLR connections on the PodMic USB.

What should you look for when buying?

First, check how the microphone sounds where you plan to use it. Then decide whether a direct USB connection will suit you or if you’d rather use an XLR recording setup.

What matters when buying What to look for Who is this important to?
Room noise and echo Check how you can position and angle the microphone. Listen to a test recording with the usual background noise in your room. If I record alone in a noisy room, I want to hear how much room sound comes through in my voice. Around 36% of consumers put room noise first.
Direct connection to a computer Check the connection on the specific model and which cables you’ll need. If I want to record on my computer without a separate interface, an easy connection matters to me. Around 29% of consumers prioritise a direct connection.
Monitoring and controls Compare the headphone output, monitoring, level controls and included pop shield for the specific model. When I record a short intro, I want to be able to check the levels and vocal noise straight away. Around 21% of consumers prioritise this kind of recording control.
Upgrading to XLR later Check the connections against the interface you’ll need. For the Shure SM7B, Shure recommends at least 60 dB of preamp gain for speech recording. If I own an interface or plan to build an analogue recording setup, I want to choose an XLR connection that suits it. Around 14% of consumers put future upgrades first.

Which buying and connection mistakes should I avoid?

  • Assuming a dedicated XLR microphone works like a USB microphone

    To record an analogue XLR signal on your computer, you’ll need a suitable interface, such as an audio interface. For speech recording with the Shure SM7B, Shure recommends at least 60 dB of preamp gain.

    Check the full signal chain and the cables you’ll need before choosing a model.

    Depending on the equipment you already own, you may also need an interface, an XLR cable and, if necessary, enough preamp gain.

  • Assuming “dynamic” means “blocks out room noise”

    Positioning, distance and where you record all affect what you hear alongside your voice. The microphone type alone won’t tell you how a recording will sound in your room.

    Record a short passage in your usual position, then listen back with the usual background noise in your recording space.

  • Assuming similar model names or bundles are identical

    The RØDE PodMic is an XLR-only model; according to RØDE, the PodMic USB offers both USB and XLR. Connections and what’s included can also vary between models and versions.

    Check the full model name, connections and contents of the specific listing. You may need an additional stand, wind shield or connection, which could change how you set it up.

A guide to leading microphone brands

Samson

The Q2U Recording and Podcasting Pack is a dynamic USB/XLR bundle designed for close-mic speech recording.

  • According to Samson, the pack includes a headphone output, desktop tripod stand, wind shield, and USB and XLR cables.
  • You’ll need to test how it records in your own room. Manufacturer claims about reducing room noise aren’t measurements taken in your recording space.

RØDE

According to the manufacturer, the PodMic USB offers USB-C and XLR; the separate PodMic is an XLR-only model.

  • RØDE lists direct monitoring and a pop shield for the PodMic USB. Its digital signal processing applies to the USB output.
  • To record on a computer with the XLR-only PodMic, you’ll also need a suitable interface.

Audio-Technica

The AT2020USB-X is a USB condenser microphone for a fixed speaking position.

  • Audio-Technica lists a desktop tripod stand, headphone output and mix control for this model.
  • These features don’t tell you how much room sound you’ll hear in your recording space.

Shure

According to Shure, the MV7+ offers USB-C and XLR; the SM7B is designed for use with a recording setup that has a suitable preamp.

  • Shure lists monitoring and digital features for the MV7+.
  • Check the version and app compatibility of the MV7+. Shure’s recommendation of at least 60 dB of gain applies to speech recording with the SM7B, not to other models across the board.

Elgato

Elgato describes the Wave:3 MK.2 as a USB condenser microphone with controls and Wave Link software.

  • For the MK.2, Elgato lists a headphone jack, Auto Gain and built-in processing.
  • Don’t assume the older “Wave 3” name refers to the Wave:3 MK.2 without checking the full model.

Microphones for podcast recording at Joybuy

This selection includes USB microphones and USB/XLR models for recording speech at home, including options with headphone monitoring and on-mic controls.

FIFINE AM8 dynamic USB/XLR microphone

FIFINE AM8 dynamic USB/XLR microphone

An option if you want to record on your computer and monitor your voice through a headphone jack.

USB and XLR connections; unidirectional pickup pattern; headphone jack, volume control and mute function. According to the product description, the controls only work in USB mode; an XLR cable is not included.

View at Joybuy
FIFINE K688CT dynamic USB/XLR microphone kit

FIFINE K688CT dynamic USB/XLR microphone kit

An option for close-mic speech recording if you want to adjust the gain and use headphone monitoring while you record.

USB and XLR connections; unidirectional pickup pattern; gain control, mute function and headphone monitoring. The description recommends a speaking distance of 2 to 6 inches. A boom arm and desk clamp are listed; according to the description, the clamp fits desks less than 2 inches thick. The controls only work with a USB connection; an XLR cable is not included.

View at Joybuy
Dynamic USB/XLR microphone set with desktop stand

Dynamic USB/XLR microphone set

An option if you want to choose between USB and XLR to suit your recording setup, and monitor your voice through a headphone jack.

Cardioid pickup pattern; USB and XLR connections; gain control, mute function and headphone jack. According to the description, a desktop stand and USB and XLR cables are included.

View at Joybuy
USB condenser microphone in a seven-piece set

USB condenser microphone, 7-piece set

An option for recording directly on your computer if you want to use a headphone jack and mute function while speaking.

USB connection; headphone monitoring and mute button. A USB cable and Type-C adapter are included, according to the description.

View at Joybuy
USB condenser microphone with cardioid pickup pattern

USB condenser microphone with cardioid pickup pattern

An option if you want to record on your computer and adjust the gain and monitoring directly on the microphone.

USB connection; cardioid pickup pattern; gain control, mute button and headphone monitoring. According to the description, a boom arm, shock mount, pop filter and USB cable are included.

View at Joybuy

Frequently asked questions about podcast microphones

Do I need an audio interface to connect an XLR microphone to my computer?

To connect a dedicated analogue XLR signal to your computer, you’ll need suitable conversion equipment, such as an audio interface or a mixer with the right features. If your microphone also has a USB output, you can use that instead to record directly on your computer.

How should I position a microphone for an intro and check the recording?

Point the recording side towards where you’ll be speaking, record a short passage at your usual volume, then listen back in the place where you’ll actually record. Direct headphone monitoring is listed for the Samson Q2U and Audio-Technica AT2020USB-X, for example. Check the specifications of other models individually.

What’s the difference between the RØDE PodMic and PodMic USB?

The RØDE PodMic is an XLR-only model; according to the manufacturer, the PodMic USB offers USB-C and XLR. To record on a computer with the XLR-only PodMic, you’ll need a suitable interface. With the PodMic USB, you can use the USB output instead.

What should I check about what’s included and the warranty?

Check what comes with the specific model: Samson lists a stand, wind shield and cables in the Q2U pack, while Audio-Technica lists a desktop tripod stand and USB accessories for the AT2020USB-X. If something is faulty, remember that your statutory rights against the seller are different from a voluntary guarantee. As Your Europe explains, consumer purchases in the EU are generally covered by a minimum two-year legal guarantee from the date you receive the goods.

Is the CE mark an independent quality mark for sound?

No. The German Federal Network Agency describes the CE mark as the manufacturer’s declaration that the product meets relevant legal requirements. It is not an independent assessment of sound quality or a mark of origin.