Course tutors without a video light
If you don’t already have a light and stand, look for a kit with all the components you need rather than buying a softbox on its own.
If you don’t already have a video light, look for a complete continuous lighting kit. If you have a light already, a compatible light modifier may be all you need. What matters is having room for the whole setup, being able to control how the pottery is lit, and recording a test clip to check colours and look for possible banding. The size of the softbox or a lux figure measured with a different reflector won’t tell you that on its own.
If you don’t already have a light and stand, look for a kit with all the components you need rather than buying a softbox on its own.
You’ll need room for the table, stand and light modifier while filming, and somewhere to put everything away afterwards.
If you already have a light, you can look for a compatible light modifier instead of investing in another complete kit.
For a pottery painting class, the key is finding the right balance between lighting control, space and the equipment you already have—not focusing on a single softbox specification.
Best if: You don’t have a suitable light or stand and want to buy all the components you need together.
Consider: A kit may include several lights and stands, so you’ll need to make room for them in your shared bedroom.
Best if: You’ve confirmed that your light has the same mount and don’t need another lighting setup.
Consider: A light modifier doesn’t produce light on its own, so you’ll still need to plan for a light, mount and stand.
Best if: Your window provides enough even light on the work table throughout the entire recording.
Consider: Changing daylight or mixed lighting can alter how colours look from one recording to the next.
| What to consider | What to check | Who it matters most to |
|---|---|---|
| Colour and detail | Check whether the specific light is dimmable and has adjustable colour temperature. Test the colours and pottery with the camera you plan to use. | If brushstrokes and paint coverage need to be clear in your course videos, controllable lighting is important. Around 33% of consumers prioritise colour and detail. |
| Space and storage | Measure the setup, stand legs, distance from the table and storage space for the folded light modifier. | If you share a bedroom, you’ll need to be able to put the lighting away after filming. That’s why around 27% of consumers prioritise available space and storage. |
| Everything included | Check the specific listing for the light, modifier, mount, stand and power cable, one by one. | If you’re buying a setup from scratch, you won’t want to accidentally end up with just a passive light modifier. Around 20% of consumers prioritise a complete starter setup. |
| Compatibility with your existing light | Compare the light and softbox models and mounts. Don’t assume FMM and Bowens are compatible unless this has been confirmed. | If you already have a light, choosing a compatible modifier is essential to make sure you can actually attach it. Around 20% of consumers prioritise compatibility with their light. |
A passive light modifier doesn’t produce light on its own. The NEEWER NK103 is described as a kit with bulbs and stands, while the Godox SB-FW6060 is a light modifier on its own.
Check what’s included against the equipment you already have, and make sure you have a light, mount and stand.
If you don’t have a light or stand, you’ll need to budget for these separately.
The manufacturer lists the assembled amaran Light Dome 60 as approximately 60.5 cm in diameter and 40 cm deep. You’ll also need space for the stand and a safe route for cables.
Measure the available space with the light modifier and stand fully assembled before choosing a size.
The NANLITE SB-FMM-60 is described as suitable for certain Forza lights, while the amaran Light Dome 60 uses Bowens. The mount names alone don’t confirm that they’re compatible.
Compare the full model names and mounts. Only consider an adapter if its suitability for that exact combination has been confirmed.
Godox gives a lux figure for the SL60IIBi at a distance of one metre with a standard reflector. This doesn’t show how brightly a pottery table will be lit with a softbox.
Test the exact combination of light, softbox and distance at your work table using the camera you plan to film with.
The documented examples range from the complete NK103 kit to the standalone NS1P light modifier for compatible lights.
Quick-fold light modifiers, including a round 45 cm model with a Bowens mount, are designed for setups that need to be packed away after filming.
The Light Dome 60 is a Bowens light modifier, sold separately for compatible COB continuous lights.
The SB-FW6060 is a Bowens light modifier on its own; the SL60IIBi is a separate light.
The SB-FMM-60 is a foldable light modifier for specific compatible lights in the Forza system.
Record a short test clip at the actual table, using the paints and pottery you plan to feature, then check it on your recording device. Adjust the colour temperature and white balance to suit your lighting. Canon Europe explains that cameras don’t compensate for changing light colours in the same way as the human eye.
Check your existing equipment for a light, modifier, mount and stand. A softbox on its own doesn’t produce light. If you’re buying a kit, also check exactly which components and cables are included.
Compare the mount and full model names of the light modifier and light. A softbox with an FMM mount isn’t automatically compatible with a Bowens light. Only consider an adapter if its suitability for that exact combination has been confirmed.
Some LED light sources can cause stripes, also known as banding, when the image is read electronically. Canon Europe highlights this as a possible effect, so test the specific combination of light, dimming level and camera with a video clip.
Check the information for the specific product and look for the appropriate markings, as well as instructions in German with usage and safety warnings. Germany’s Federal Network Agency lists these points for electrical products. For products covered by relevant EU legislation, the CE marking is a manufacturer’s declaration, not an independent quality mark. A passive fabric light modifier isn’t automatically subject to the same requirements as an electric light. Keep lights and connections away from liquids, and follow the instructions for the specific model.