Who needs access to the archive?

Archive team with a dedicated PC

If you work with archive files on a dedicated computer, check the connection between floors and make sure there’s a suitable LAN port at the destination.

Team using mobile archive workstations

For laptops or tablets used in different rooms, it’s important to identify the Wi-Fi locations you need and how many receivers will be required on each floor.

Club with existing adapters

If you want to extend an existing Powerline network, first note down the full model names and product families of the adapters already installed.

Which criteria matter most?

First, decide whether you need a dedicated LAN connection at the archive workstation or Wi-Fi for mobile devices. Then test the connection using the intended sockets and check compatibility with any adapters already installed.

What you need What to check before buying Who is this especially important for?
Connection between floors Test the adapters in the intended wall sockets and open or transfer typical archive files. If access between floors needs to work from specific sockets, I want to test the connection with typical files. Around 36% of consumers prioritise connection quality between floors.
LAN at a dedicated archive workstation Check the Ethernet connection on the computer and how many connections you’ll need at the destination at the same time. For my dedicated archive PC, I need a suitable Ethernet connection and, if necessary, several ports at the destination. Around 29% of consumers prioritise a dedicated LAN archive workstation.
Wi-Fi for mobile workstations Identify the Wi-Fi locations you need, then check the kit’s Wi-Fi function and the number of receivers included. If I want to access the archive on a laptop or tablet from different rooms, I need Wi-Fi at each location. Around 21% of consumers prioritise mobile archive workstations with Wi-Fi.
Compatibility with existing adapters Note down the model names and Powerline standards in use, then compare them with the manufacturer’s specifications. If I want to keep using my existing adapters, any new receiver must work with the installed Powerline network. Around 14% of consumers prioritise extending their existing network.

Common buying mistakes

  • Assuming the advertised Powerline rate is your guaranteed file transfer speed

    The advertised physical rate isn’t the same as the data throughput you can actually use. Your electrical wiring and sources of electrical interference can also affect the connection.

    Test a typical archive file using the intended sockets rather than comparing only the Mbps figure on the box.

  • Planning for just one receiver when you need Wi-Fi in several workspaces

    A Wi-Fi adapter won’t automatically provide coverage at several remote locations. Starter and multi-room kits can include different numbers of Wi-Fi receivers.

    Mark the locations where you need Wi-Fi and compare them with what’s included in the kit.

  • Mixing Powerline product families without checking compatibility

    devolo states that Magic and dLAN adapters can’t be used together in the same Powerline network.

    Note down the full model names of all your existing adapters before choosing an extender.

  • Assuming a network connection also controls who can access the archive

    A working connection doesn’t determine who can read club or member data in the archive. The Bavarian State Office for Data Protection Supervision points out that clubs must meet data protection obligations when processing personal data.

    If the archive contains personal data, secure the system as well and restrict access to authorised users.

Key brands to consider

devolo

Worth considering if you need LAN, Wi-Fi or multiple Wi-Fi receivers on remote floors at the archive workstation.

  • According to devolo, the Magic 2 WiFi next Multiroom Kit includes one LAN adapter and two Wi-Fi adapters. The manufacturer says the Magic 2 LAN triple has three Gigabit LAN ports on the destination adapter.
  • devolo says Magic and dLAN can’t be used together in the same Powerline network. Advertised rates don’t predict throughput in your club building.

FRITZ!

The FRITZ!Powerline 1260 WLAN Set may suit an archive workstation that needs Wi-Fi and a LAN connection.

  • FRITZ! lists Wi-Fi Mesh and a Gigabit LAN port for network devices.
  • This doesn’t confirm that the connection will work across the floors you have in mind. Plan for any additional LAN connections or Wi-Fi locations separately.

TP-Link

HomePlug AV/AV2 devices such as the TL-PA7019P KIT are an option for a dedicated, wired archive workstation.

  • TP-Link lists a Gigabit Ethernet port and an integrated pass-through socket for the TL-PA7019P KIT.
  • TP-Link distinguishes the advertised physical Powerline rate from actual throughput. The manufacturer’s example measurements aren’t a prediction for this kit or your club building.

MERCUSYS

The MP500 KIT is another HomePlug AV2 option for a single wired workstation.

  • MERCUSYS describes the MP500 KIT V1 as a starter kit with a Gigabit port.
  • The range stated by the manufacturer applies specifically to the same electrical circuit. For separate floors, test the connection using the intended sockets; the product page doesn’t confirm that it has built-in Wi-Fi.

Powerline kits at Joybuy

This selection includes Powerline kits for dedicated LAN archive workstations, as well as one kit whose product name also mentions Wi-Fi. For each location, check whether the connection through your existing sockets and across your floors meets your needs.

TP-LINK TL-PA4010P AV600 Powerline Starter Kit

TP-LINK TL-PA4010P AV600 Powerline Starter Kit

For a dedicated archive PC that will connect via Ethernet.

The product name lists 600 Mbps and compatibility with HomePlug AV/AV2.

View at Joybuy
MERCUSYS MP500 KIT HomePlug AV2 Powerline Kit

MERCUSYS MP500 KIT, 1000 Mbps, HomePlug AV2

For a dedicated archive PC that uses a wired network connection.

The product name lists 1000 Mbps, a Gigabit port and HomePlug AV2. Wi-Fi isn’t included, according to the product name.

View at Joybuy
MERCUSYS MP300 KIT AV600 Powerline Kit with Wi-Fi

MERCUSYS MP300 KIT AV600

For an archive workstation that needs Wi-Fi as well as a LAN connection.

The product name lists Wi-Fi 600 Mbps, a Gigabit port and compatibility with HomePlug AV/AV2.

View at Joybuy
MERCUSYS MP500P KIT AV1000 Powerline Kit with pass-through socket

MERCUSYS MP500P KIT AV1000 Gigabit Passthrough

For a dedicated archive workstation that needs a wired connection and an extra socket.

The product name lists 1000 Mbps, a Gigabit port and a pass-through socket.

View at Joybuy
MERCUSYS MP300P AV600 Powerline Kit with pass-through socket, two-pack

MERCUSYS MP300P AV600, pass-through socket, 2-pack

For a dedicated archive PC that will connect via Ethernet using a Powerline kit.

The product name lists AV600, a pass-through socket and a two-pack.

View at Joybuy

Frequently asked questions

How do I set up Powerline for an archive room on another floor?

For a new Powerline network, you’ll need one adapter by the router and at least one compatible adapter at the destination. devolo recommends plugging the adapters directly into wall sockets wherever possible. Then test the connection at the locations you’ll actually be using.

Does the Mbps figure on the box match my file transfer speed?

No. TP-Link distinguishes the advertised Powerline speed—the physical rate—from actual data throughput. Manufacturer examples are based on specific test conditions and can’t be applied to your club building.

Is a Powerline kit with LAN enough for laptops and tablets?

A LAN connection alone won’t provide Wi-Fi at the destination. If mobile devices need wireless access from remote archive workstations, choose suitable Wi-Fi receivers and check how many are included in the kit.

Can I combine a devolo Magic adapter with existing dLAN adapters?

Not in the same Powerline network: devolo states that Magic and dLAN aren’t compatible with each other. Before extending your network, check the exact models of all your existing adapters.

Is a Powerline connection enough to protect members’ data?

No. A network connection alone doesn’t provide data protection or control access rights. If the archive contains personal data, the club should restrict access to authorised users and secure the system as well. The Bavarian State Office for Data Protection Supervision recommends measures including password protection, up-to-date systems and backups.