Who prints presentation boards?

Designers creating large boards

If your design needs to be larger than A3+, check the supported size and distinguish between roll and sheet feeding for the specific printer. HP lists the DesignJet T230 as supporting A1; Canon specifies a 24-inch print width for the imagePROGRAF TC-21.

Designers creating colourful A3+ prints

For individual sheets featuring images or blocks of colour, the borderless print size you need and the right media feed are key. Canon lists borderless printing up to A3+ for the PIXMA iX6850; Epson describes rear A3+ feeds for thicker compatible media on the EcoTank ET-8550.

Users of a shared office printer

If you also work with documents as well as boards, check the print, scan and copy sizes separately. Brother lists printing up to A3 for the MFC-J5740DW, but scanning and copying are limited to A4.

What should you look for when choosing?

A3+ single-sheet printer

A good fit if: your individual paper designs are no larger than A3+.

Limitation: the stated size will not be large enough for bigger, uninterrupted boards; also check that the material you plan to use is suitable for the feed.

24-inch printer

A good fit if: you want to print larger, uninterrupted paper designs and the roll or sheet feed suits the finished size.

Limitation: allow space for the printer, feed and output; a 24-inch print width does not mean that every rigid board can be fed through it.

Selection criterion What to check before buying Who should consider this?
Finished size without joining sections Compare the size you need with the supported size and the roll or sheet feed of the specific model. If you want the design to fit on the board without joining sections, the maximum print area you need is especially important. Around 33% of consumers say that the finished size without joining sections is their most important selection criterion.
Paper, card or board Compare the material type, dimensions and thickness with the feed specifications for the specific model. If you want to print directly onto your chosen material, that specific material must be suitable for the feed; otherwise, you could print onto suitable paper and mount it afterwards. Around 27% of consumers put material compatibility first.
Ink and media for repeated drafts Consider the paper, actual ink usage and misprints together, using one of your own typical designs and sizes. If you regularly revise designs or print proofs, comparable usage figures for your size are more useful than yields based on other print jobs. Around 20% of consumers prioritise the cost of repeated prints.
Space and other tasks Allow for the printer’s dimensions and space for feeding and output; check print, scan and copy sizes separately. If space is limited or the printer also needs to handle documents, make sure it fits your workspace and has the extra functions you need. Around 20% of consumers prioritise workspace and other tasks.

Common pitfalls

  • Assuming a presentation board is the same as a board you can print on directly

    Specifications for roll paper, individual sheets or thicker compatible media do not give general approval for rigid boards.

    Decide on the material and production method before choosing a printer. Check whether the feed supports your specific material, or plan to print onto suitable paper and mount it afterwards.

  • Assuming a 24-inch print width supports every individual sheet

    For the Epson SureColor SC-T2100, Epson lists rolls up to 24 inches, but sheets up to A3 for the described sheet feed.

    Compare the roll and sheet limits separately with the finished size you need.

  • Applying A4 yields to a large board

    Canon’s stated yield tests for the PIXMA iX6850 are based on A4 colour documents or 10 × 15 cm photos, not full-coverage A3+ designs.

    Compare usage using one of your own designs at the same size, including paper and possible misprints.

  • Confusing A3 printing with A3 scanning and copying

    Brother lists printing up to A3 for the MFC-J5740DW, but scanning and copying are limited to A4.

    Check the maximum size for each function you need.

Relevant brands and model ranges

Canon

The model ranges relevant here span A3+ single-sheet printing through to 24-inch printing.

  • Canon lists borderless printing up to A3+ for the PIXMA iX6850 and a 24-inch print width with both roll and sheet feeding for the imagePROGRAF TC-21.
  • The size specifications do not confirm that rigid boards can be fed directly. The iX6850’s manufacturer-stated yield tests are based on smaller, standardised print jobs.

Epson

The EcoTank ET-8550 is designed for A3+ image prints; the SureColor SC-T2100 is a separate 24-inch option.

  • Epson lists refillable ink tanks, borderless A3+ printing and rear feeds for thicker compatible media for the ET-8550. For the SC-T2100, Epson describes rolls up to 24 inches.
  • For the SC-T2100, sheets supported by the described sheet feed are limited to A3. The ET-8550’s support for thicker media does not mean that every presentation board is suitable.

HP

The DesignJet T230 is a 24-inch model range for larger paper designs, with both sheet and roll feed.

  • HP lists sizes up to A1 and an automatic horizontal cutter for the T230.
  • HP notes that this model has dynamic security measures that may block cartridges using non-HP chips.

Brother

The MFC-J5740DW combines A3 printing with everyday office functions.

  • Brother lists printing up to A3, as well as scanning and copying up to A4.
  • A3 printing on this model does not mean that you can also scan or copy documents in A3.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Is an “A3+” specification enough for a presentation board?

Only if your print fits the size specified for the particular model. Canon gives the PIXMA iX6850’s A3+ size as 329 × 483 mm; also allow space for trimming or mounting.

Can I print directly onto a rigid presentation board?

Specifications for paper and card feeds do not confirm general suitability for rigid boards. Check that the material is supported by the feed on the specific model; alternatively, you can print onto suitable paper and mount it on a board.

What should I consider when positioning a roll-paper printer?

As well as the printer’s dimensions, allow space to load and remove the media you plan to use. Canon lists dimensions of 968 × 533 × 245 mm for the imagePROGRAF TC-21 and describes both roll and sheet printing.

Can I work out the cost of printing my boards from a stated ink yield?

Not directly if the yield is based on different sizes or designs. Canon’s figures for the PIXMA iX6850 are based on standardised A4 colour documents or borderless 10 × 15 cm photos; for a board, compare ink usage and paper costs using the same size and a similar design.

Are roll and sheet sizes always the same on a 24-inch printer?

No, the supported sizes can vary depending on the feed. Epson lists rolls up to 24 inches for the SureColor SC-T2100, but individual sheets up to A3, so compare both options with the finished size you have in mind.